Search Rohde-Schwarz.com

The USB-IF has approved the USB 3.2 compliance test solution from Rohde & Schwarz, confirming that it meets the stringent requirements set by the standardization body. Manufacturers of USB devices can have full confidence in the accuracy and reliability of the test results produced by the test solution.

Jun 5, 2024 | Press Releases | Test & measurement

R&S®RTP high performance series oscilloscopes benefit from highly accurate measurements, unprecedented speed and a compact form factor. More information.

Rohde & Schwarz launches its novel wideband modulated load pull solution based on the R&S RTP oscilloscope. It offers an extension to traditional vector network analyzer (VNA)-based solutions for non-linear device characterization by enabling load pull with wideband modulated signals to support RF components development for next-generation wireless technologies.

Jan 20, 2025 | Press Releases | Test & measurement

The external Frontend control software enables the operation of the external Frontends R&S FExx on the R&S RTP oscilloscope.

The Rohde & Schwarz options support signal integrity debugging and automated compliance testing of DDR5/ LPDDR5, DDR4/ LPDDR4 and DDR3/ DDR3L/ LPDDR3 interfaces. Learn more.

This option supports automated compliance testing for 100BASE-T, 1000BASE-T, 100BASE-T1 and 1000BASE-T1 Ethernet of options RTO-K22, RTO-K24, RTO-K87, RTP-K22, RTP-K24, RTP-K87, RTP-K98

The R&S®RTP-K140/141 options enable the high-speed serial pattern trigger function with a maximum nominal data rate of 8 Gbps or 16 Gbps. More info.

The TDR/TDT software option creates a time domain reflection (TDR) and time domain transmission (TDT) analysis system for R&S®RTO or RTP oscilloscopes. Explore now!

The R&S®RTP and RTO oscilloscopes supports triggering and decoding of USB 3.1 Gen 1 and Gen 2 signals. Explore the USB 3.1 triggering & decoding software here.

Rohde & Schwarz will present its advanced test and measurement solutions for the embedded industry at embedded world Exhibition & Conference in Nuremberg, Germany.

Feb 20, 2026 | Press Releases | Test & measurement

Rohde & Schwarz has collaborated with Analog Devices, Inc. (ADI) to create a wide range of tests for Gigabit Multimedia Serial Link (GMSL) devices. The GMSL technology from ADI provides a cost-efficient, scalable, and simple SerDes solution designed to improve performance for high-speed video links, primarily used in In-Vehicle Infotainment (IVI) and Advanced Driver-Assistance Systems (ADAS) in vehicles. The collaboration will enable engineers, developers and manufacturers to create and deploy GMSL-based ADAS and IVI systems rapidly.

Dec 20, 2024 | Press Releases | Automotive

The option R&S®RTP-K98 enables to perform wideband load-pull measurements with a setup based on R&S®RTP oscilloscope and R&S®SMW200A.

R&S®RTP and R&S®RTO oscilloscopes support TX and RX compliance tests for V1.1/2.0/3.2 Gen 1&2

Video Electronics Standards Association (VESA) has officially approved Rohde & Schwarz test solutions for testing DisplayPort technology. This achievement reinforces the company’s commitment to delivering high-quality solutions for testing of the physical layer compliant with various industry standards.

Apr 24, 2025 | Press Releases | Test & measurement

The R&S®RTP-K114 and R&S®RTP-K115 options enable DP 1.4b and eDP 1.4a/1.5 compliance testing on R&S®RTP oscilloscopes.

The R&S®RTP and R&S®RTO oscilloscope supports serial triggering and decoding of Automotive Ethernet BroadR-Reach or 100BASE-T1. Explore the features now.

Learn about how to configure cable emulation within the Embedding setup dialog

Learn about key advantages of the Embedding and Equalization option of the R&S RTP & RTO6 oscilloscopes. Start with the Signal Configurator.

Learn how easy it is to configure a equalizer emulation within the Equalizer setup dialog. For interface standards such as USB, PCIe or DP, the necessary S-parameter files are included in the oscilloscope software.

The Eye Diagram is an effective tool to validate signal integrity. This video compares the eye diagram on a signal acquired at the output of a USB transmitter versus a waveform with some added cable emulation.

The realtime deembedding of signal path characteristics is based on S-parameters. Learn more about the deembedding software option for general analyses here.

The option R&S RTP-K110 enables HDMI 1.4b/2.1 compliance testing on the R&S RTP oscilloscopes.

The R&S®RTP, R&S®RTO and R&S®RTE oscilloscopes support triggering and decoding of SpaceWire data and communications buses. Explore the SpaceWire triggering and decoding software.

The high definition (HD) mode increases the vertical resolution of the R&S®RTE, R&S®RTO and R&S®RTP oscilloscopes to up to 16-bit. Benefit from precise analysis results!

Advanced Jitter Analysis for the RTO and RTP oscilloscopes, enabling the decomposition of the total jitter into it its individual components such as Random and Deterministic jitter.

R&S®MXO Series family, R&S®RTP and R&S®RTO6 oscilloscopes support decoding and triggering of aerospace protocols such as MIL-STD-1553, ARINC 429, SpaceWire. Find out more about the software package here.

R&S®RTP, RTO and MXO oscilloscopes support the decoding and triggering of automotive protocols such as CAN, CAN-FD, CAN-XL, LIN, FlexRay, SENT, CXPI. Find out more about the software package here.

Many R&S oscilloscopes support triggering and decoding of ARINC 429 buses. Explore the ARINC triggering & decoding oscilloscope software here.

K135 enables PAM-N Analysis for teh RTO and RTP Oscilloscopes.