IoT / M2M Webinars & Videos

The video explains how to test NB-IoT networks that include network performance (is the network access working in an optimal way) and system performance (what is the machine experience).

This video demonstrates what deep insights into an NB-IoT network you get when using a network scanner and an NB-IoT device in parallel, both connected to the R&S®ROMES4 mobile network optimization software.

This video provides a short overview about the 3GPP Release 14 features for NB-IoT. It also explains the new device category NB2 in detail.

This video provides a short overview about the 3GPP Release 14 features for LTE-M. It also explains in detail the new device category M2 and the positioning with OTDOA.

This webinar provides the background to IP secure connections and introduces a test solution that makes it possible to identify vulnerabilities in the IP connection.

The video shows how easy it is to perform some of the essential RF tests required for the certification of Sigfox modules and devices.

This video demonstrates precise power consumption measurements on an LTE-M (Cat-M1) device as example. We will show the impact of different parameters such as eDRX on the power consumption in connected mode.

This video demonstrates precise power consumption measurements on an LTE-M (Cat-M1) device as example. We will show the impact of different parameters such as eDRX and PSM on the power consumption in idle mode.

The video shows typical NB-IoT use cases and discusses the biggest challenge in NB-IoT networks: coverage. What methods are used to increase the coverage in DL and UL direction? Find out why accurate coverage measurements are so important for the new NB-IoT radio system.

his video demonstrates how easy it is to test NB-IoT coverage with a network scanner, such as the R&S TSMA, and the R&S ROMES4 analysis software. This test setup is configured quickly with a few klicks. Explore NB-IoT coverage measurements, learn how to evaluate them and compare NB-IoT with LTE coverage results measured in parallel.

The new Rohde & Schwarz IoT video series explains the main test challenges the wireless IoT industry is facing in development, manufacturing and deployment of IoT devices, networks and applications.

Cellular IoT (cIoT) is on the rise. The video explains what we can expect from LTE-M and NB-IoT in the next 3GPP Releases (Rel.14 and Rel.15).

In this video, we make a short tour on the technology evolution of Bluetooth LE to Bluetooth 5 to address the IoT market beyond wearables, PC peripherals and audio equipment.

The video discusses LoRaWAN, one of the most promising LPWAN technologies. Find out how it works and how to analyze LoRa signals using the R&S^®RTO oscilloscope.

In this video, we talk about the test of the most important LPWAN performance parameters on the example of LoRaWAN and demonstrate the impact of different spreading factors on the receiver sensitivity.

This video explains Sigfox and recommended test setups based on Rohde & Schwarz signal generators and analyzers to verify the most important performance parameters such as RF performance (RX and TX tests) and power consumption.

In this video we explain the power saving features eDRX and PSM applicable for NB-IoT and eMTC.

The video demonstrates Bluetooth 5 measurements using the R&S^®CMW270 wireless connectivity tester. Learn how the physical layer has changed with Bluetooth 5 and how to perform transmitter and receiver measurements using the R&S^®CMW platform. The R&S^®CMW platform also covers all test cases defined by the Bluetooth SIG.

Rohde & Schwarz demonstrated 5G antenna testing up to mmWave frequencies in a portable shielded chamber at the GSMA Mobile World Congress 2017 in Barcelona.

Rohde & Schwarz presented a compact solution for narrowband IoT RF performance verification at the GSMA Mobile World Congress 2017 in Barcelona.

Rohde & Schwarz presented the first one-box solutions for protocol, RRM and RF certification testing of eMTC and NB-IoT devices at the GSMA Mobile World Congress 2017 in Barcelona.

Rohde & Schwarz presented new eMTC and NB-IoT testing capabilities at the GSMA Mobile World Congress 2017 in Barcelona.

Rohde & Schwarz demonstrated the first radio communication tester with IEEE 802.11ac signaling at the GSMA Mobile World Congress 2017 in Barcelona.

Rohde & Schwarz showcased the monitoring of the battery life of wireless devices at the GSMA Mobile World Congress 2017 in Barcelona.

Rohde & Schwarz presented IP connection security analysis at the GSMA Mobile World Congress 2017 in Barcelona.

The video demonstrates Bluetooth Low Energy RF measurements with Direct Test Mode (DTM) using the R&S®CMW wireless communications platform and the Nordic nRF52 development kit as an example. Learn how to set up the DTM interface to the device under test and how to set up and perform TX and RX measurements using the multi evaluation mode.

In this webinar, we will explain the different features for low-power IoT designs and explore the value of end-to-end testing under real-life network conditions based on a unique test solution that allows very precise power and current measurements.

This video demonstrates on an example M2M IoT device the Multi-domain test capabilities of the R&S^®RTO oscilloscope.

This webinar will bring some light into the jungle of wireless IoT technologies and related challenges and will give you some insight into how Rohde & Schwarz can help engineers to gain the full power of testing.

The video explains Kamstrup’s requirements, why they have chosen Rohde & Schwarz and how the new test laboratory benefits their business.

Rohde & Schwarz demonstrated a one-box solution for testing mobile communications devices that integrate multiple radio technologies at the GSMA Mobile World Congress 2016 in Barcelona.

This Webinar demonstrated how to quantify signaling impact and power consumption.

Rohde & Schwarz presented an automated solution for reliable and reproducible end-to-end conformance testing of eCall and ERA-Glonass modules at the GSMA Mobile World Congress 2015 in Barcelona.

Rohde & Schwarz presented the R&S^®CMWrun sequencer software, the automation tool for the R&S^®CMW500 wideband radio communication tester, at the GSMA Mobile World Congress 2015 in Barcelona.