R&S®AREG100A Automotive Radar Echo Generator

R&S®AREG100A Automotive radar echo generator
Open Lightbox
R&S®AREG100A Automotive radar echo generator
Open Lightbox
R&S®AREG100A Automotive radar echo generator R&S®AREG100A Automotive radar echo generator

Key facts

  • Supports 24 GHz, 77 GHz and 79 GHz automotive radar sensors
  • Future proof with instantaneous bandwidths of up to 4 GHz
  • 4 m minimum artificial object distance for short range radar testing
  • Up to 4 artificial objects in fixed distances at the same time
  • Controllable radial velocity for each artificial object individually (under development) or for all artificial objects together
  • 3 years warranty

Reliable production testing of automotive radar sensors made easy

The R&S®AREG100A Automotive Radar Echo Generator is a smart and robust solution for testing automotive radar sensors in production. With the R&S®AREG100A, production engineers profit from a perfect balance of flexibility of test cases and at the same time simple and robust operation.

I    Supports all automotive radar bands
I    4 GHz instantaneous bandwidth
I    4 m minimum artificial object distance

Features & benefits

Reliable and flexible echo generation

  • Install up to four different, customer defined fixed delay lines to simulate unrelated object echoes
  • Simulate echoes with minimum delay for short range radar (SRR) sensor tests
  • Simulate echoes for long range radar (LRR) sensor tests
  • Select additional Doppler offsets to simulate radial velocity for each artificial object individually (under development) or for all artificial objects together
AREG100A - Automotive radar echo generator
Open Lightbox

With the R&S®AREG100A it has never been easier to monitor the quality of automotive radar sensors in mass production.

Test today’s and tomorrow’s radar sensors

  • Choose a 24 GHz ISM band frontend, an E-band frontend or both together for sequential operation
  • Profit from a future proof wideband E-band frontend with 4 GHz instantaneous bandwidth for short range radar (SRR) sensor test
  • All frontends in a single antenna configuration for superior MIMO testing performance or in a two antenna configuration with high RX/TX isolation for lowest ringaround.
AREG100A Automotive radar echo generator
Open Lightbox

R&S®AREG100A with single antenna frontend for reliable testing of MIMO radar sensors

Ready for RED

  • Measure the sensor’s equivalent radiated isotropic power (EIRP) in line with the applicable standards with a connected R&S NRP8S(N) power sensor
  • Verify robustness of radar sensors against in-band interferers with a connected analog or vector signal generator
  • Measure occupied bandwidth and unwanted emissions with a connected signal and spectrum analyzer
AREG100A Automotive radar echo generator
Open Lightbox

The R&S®AREG100A and the R&S®FSW8 are the perfect team for convenient measurement of radar signal parameters in the E band.

Simple and stable operation

  • Linux based operating system for maximum software stability
  • Optimized for minimum footprint with just 3 HUs
  • SCPI macro recorder with automatic code generator
  • Intuitive GUI for user friendly operation
AREG100A Automotive radar echo generator
Open Lightbox

Simple man-machine interface for user friendly configuration with intuitive GUI and toch screen control

Specifications
Frequency
Frequency rangeR&S®AREG-B124S/-B124D24 GHz to 24.25 GHz, single or dual antenna
 R&S®AREG-B177S/-B177D76 GHz to 77 GHz, single or dual antenna
 R&S®AREG-B181S/-B181D76 GHz to 81 GHz, single or dual antenna
Signal bandwidth
Instantaneous bandwidthR&S®AREG-B124S/-B124D250 MHz
 R&S®AREG-B177S/-B177D1 GHz
 R&S®AREG-B181S/-B181D4 GHz from 76 GHz to 81 GHz
(configurable: either 76 GHz to 80 GHz or 77 GHz
to 81 GHz)
Artificial objects
Object type fixed distance
Total number of objects 4
Object distancesup to one R&S®AREG-B61 option4 m (incl. 0.8 m air gap between R&S®AREG
frontend and radar under test)
 up to three R&S®AREG-B62 options, distance for
each option has to be defined during ordering
process
5 m to 300 m (incl. 0.8 m air gap between
R&S®AREG frontend and radar under test);
customer definable during ordering process
Air gap to device under test It is recommended that antennas be positioned
in far field;
customer definable during ordering process
Radial velocity
Doppler frequency shiftWith R&S®AREG-K799 Doppler frequency shift for all artificial objects togetheryes
Individual Doppler frequency shiftWith R&S®AREG-B60 1) Doppler frequency shift for each artificial object individually yes
Velocity setting rangeR&S®AREG-B60 and R&S®AREG-K799+/- 500 km/h
Level
Absolute maximum RX power at frontend RX waveguide portR&S®AREG-B124S/-B124D0 dBm (nom.)
 R&S®AREG-B177S/-B177D–7 dBm (nom.)
 R&S®AREG-B181S/-B181D–7 dBm (nom.)
Maximum TX power at frontend TX waveguide portR&S®AREG-B124S/-B124D≥ 15 dBm (meas.)
 R&S®AREG-B177S/-B177D≥ 20 dBm (meas.)
 R&S®AREG-B181S/-B181D≥ 18 dBm (meas.)
Receive/transmit gain control
setting range
all artificial objects together> 90 dB (meas.)
 each object individually55 dB (meas.)
Receive/transmit gain control
step size
 0.5 dB (nom.)
IF input/IF output
IF input/output interfaceswith R&S®AREG-B17 option❙calibrated IF outputs on frontend and base unit
❙calibrated IF input on base unit
IF input gain from auxiliary TX IF In port (at IF frequency) to frontend TX waveguide output (at RF frequency)
 R&S®AREG-B124S/-B124D, RF frequency = 24.125 GHz20 dB (meas.)
 R&S®AREG-B177S/-B177D, RF frequency = 76.5 GHz20 dB (meas.)
 R&S®AREG-B181S/-B181D, RF frequency = 78 GHz or 79 GHz20 dB (meas.)
IF input compression P1dB level at TX IF In port (at IF frequency)
 R&S®AREG-B124D1 dBm (meas.)
 R&S®AREG-B177D1 dBm (meas.)
 R&S®AREG-B181D–5 dBm (meas.)
Connectivity
Remote control Ethernet
 with R&S®AREG-B86 optionGPIB, USB
1) Under development

Available options

Frequency band
Product Description

R&S®AREG-B124D

Order number 1430.5100.02

Description

Dual Antenna Frontend 24 GHz to 24.25 GHz

R&S®AREG-B124S

Order number 1430.5000.02

Description

Single Antenna Frontend 24 GHz to 24.25 GHz

R&S®AREG-B177D

Order number 1430.5700.02

Description

Dual Antenna Frontend 76 GHz to 77 GHz

R&S®AREG-B177S

Order number 1430.5752.02

Description

Single Antenna Frontend 76 GHz to 77 GHz

R&S®AREG-B181D

Order number 1430.5152.02

Description

Dual Antenna Frontend 76 GHz to 81 GHz

R&S®AREG-B181S

Order number 1430.5052.02

Description

Single Antenna Frontend 76 GHz to 81 GHz

Artificial objects
Product Description

R&S®AREG-K799

Order number 1437.2488.02

Description

Doppler frequency shift for generating a common radial velocity for all objects

R&S®AREG-B60

Order number 1430.5552.02

Description

Doppler frequency shift for generating an individual radial velocity for each object

R&S®AREG-B61

Order number 1430.5317.02

Description

Short fixed object distance, 3.2 m + air gap

R&S®AREG-B62

Order number 1430.5369.02

Description

Fixed object distance, customer defined

Intermediate frequency ports and control interfaces
Product Description

R&S®AREG-B17

Order number 1430.5200.02

Description

Analog IF input and output interfaces

R&S®AREG-B86

Order number 1430.5252.02

Description

GPIB/USB Remote Control Interface

Recommended extras: power sensors
Product Description
NRP8S_img.jpg

R&S®NRP8S

Order number 1419.0006.02

Description

Three-path diode power sensor

For USB operation

Measurement range: 100 pW to 200 mW
Frequency range: 10 MHz to 8 GHz
N (m) connector

NRP8SN_front.jpg

R&S®NRP8SN

Order number 1419.0012.02

Description

Three-path diode power sensor

Measurement range: 100 pW to 200 mW
Frequency range: 10 MHz to 8 GHz
N (m) connector

Related videos

Accurate EIRP measurement of automotive radar sensors in line with RED

05-Jul-2018

Simple solution for radar echo generation and simultaneous radar transmit signal analysis

05-Jul-2018

Innovative and simple solution for testing automotive radar sensors against interferers

05-Jul-2018

End-of-line testing of automotive radar sensors in production made easy

05-Jul-2018

Reliable all-in-one test solution for automotive radar sensors

02-Jul-2018

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.