R&S®ZV-Z19x Network analyzer test cables

Outstanding RF performance combines with stability 

R&S®ZV-Z19x Network analyzer test cables
Open Lightbox
R&S®ZV-Z19x Network analyzer test cables
Open Lightbox
R&S®ZV-Z19x Network analyzer test cables, Front High R&S®ZV-Z19x Network analyzer test cables, Front High

Key facts

  • Excellent electrical and mechanical performance
  • Type, N, 3.5mm, 2.92mm, 2.4mm, 1.85mm, 1.0 mm.
  • Lightweight construction
  • Excellent phase and amplitude stability with flexure
  • Small bend radius without affecting performance

Durable and reliabale performance for you VNA test setup

The ZN-Z19x is a series of high performing VNA/RF test cables: The rugged construction at a light weight, and the excellent phase and magnitude stability with flexture deliver permanant performance an dreliable results over long test periods. Re-calibration, and system  downtime are cut down to a minimum. The test cables are available from 18 GHz to 110 GHz, with different length, and the corresponding connector types.

Features & benefits

High-end RF performance

Minimize test setup response -maximize stability

With the ZV-Z19x cables the response of the test setup, caused by attenuation or connector matching, is minimized. Thus supporting handling of high and low power levels, high sensitivity and dynamic range, and stability of VNA user system error correction.

Internal rugged construction

Repeatability despite of demanding conditions

While the outer crush resistance design is obvious for the ZV-Z9x cables, the ZV-Z19x internal cable design maintains measurement repeatability  even with continuous flexing, and temperature cycling over wide ranges.

Available models

Available models
Models
Type
Frequency range
Connector type
Length

R&S®ZV-Z191

Order number 1306.4507.24

Type
Test port cable
Frequency range
0 Hz to 18 GHz
Connector type
N (m) - N (m)
Length
610 mm (24 in)

R&S®ZV-Z191

Order number 1306.4507.36

Type
Test port cable
Frequency range
0 Hz to 18 GHz
Connector type
N (m) - N (m)
Length
914 mm (36 in)

R&S®ZV-Z192

Order number 1306.4513.24

Type
Test port cable
Frequency range
0 Hz to 18 GHz
Connector type
N (m) - 3.5 mm (m)
Length
610 mm (24 in)

R&S®ZV-Z192

Order number 1306.4513.36

Type
Test port cable
Frequency range
0 Hz to 18 GHz
Connector type
N (m) - 3.5 mm (m)
Length
914 mm (36 in)

R&S®ZV-Z193

Order number 1306.4520.24

Type
Test port cable
Frequency range
0 Hz to 26.5 GHz
Connector type
3.5 mm (f) – 3.5 mm (m)
Length
610 mm (24 in)

R&S®ZV-Z193

Order number 1306.4520.36

Type
Test port cable
Frequency range
0 Hz to 26.5 GHz
Connector type
3.5 mm (f) – 3.5 mm (m)
Length
914 mm (36 in)

R&S®ZV-Z193

Order number 1306.4520.60

Type
Test port cable
Frequency range
0 Hz to 26.5 GHz
Connector type
3.5 mm (f) – 3.5 mm (m)
Length
1524 mm (60 in)

R&S®ZV-Z193

Order number 1306.4520.61

Type
Test port cable
Frequency range
0 Hz to 26.5 GHz
Connector type
3.5 mm (m) - 3.5 mm (m)
Length
1524 mm (60 in)

R&S®ZV-Z195

Order number 1306.4536.24

Type
Test port cable
Frequency range
0 Hz to 40 GHz
Connector type
2.92 mm (f) – 2.92 mm (m)
Length
610 mm (24 in)

R&S®ZV-Z195

Order number 1306.4536.36

Type
Test port cable
Frequency range
0 Hz to 40 GHz
Connector type
2.92 mm (f) - 2.92 mm (m)
Length
914 mm (36 in)

R&S®ZV-Z196

Order number 1306.4559.24

Type
Test port cable
Frequency range
0 Hz to 67 GHz
Connector type
1.85 mm (f) - 1.85 mm (m)
Length
610 mm (24 in)

R&S®ZV-Z196

Order number 1306.4559.25

Type
Test port cable
Frequency range
0 Hz to 67 GHz
Connector type
1.85 mm (m) - 1.85 mm (m)
Length
610 mm (24 in)

R&S®ZV-Z196

Order number 1306.4559.36

Type
Test port cable
Frequency range
0 Hz to 67 GHz
Connector type
1.85 mm (f) - 1.85 mm (m)
Length
914 mm (36 in)

R&S®ZV-Z196

Order number 1306.4559.37

Type
Test port cable
Frequency range
0 Hz to 67 GHz
Connector type
1.85 mm (m) - 1.85 mm (m)
Length
914 mm (36 in)

R&S®ZV-Z197

Order number 1306.4571.24

Type
Test port cable
Frequency range
0 Hz to 50 GHz
Connector type
2.4 mm (f) - 2.4 mm (m)
Length
610 mm (24 in)

R&S®ZV-Z197

Order number 1306.4571.36

Type
Test port cable
Frequency range
0 Hz to 50 GHz
Connector type
2.4 mm (f) - 2.4 mm (m)
Length
914 mm (36 in)

R&S®ZV-Z198

Order number 1306.4565.06

Type
Test port cable
Frequency range
0 Hz to 110 GHz
Connector type
1.00 mm (f) - 1.00 mm (m)
Length
160 mm (6 in)

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.