8002 Results
This application notes introduces the Multi-Standard Radio Analyzer function of the R&S®FSW and shows how it performs the measurement on multi-standard radio transmitters.
17-Jul-2012 | AN-No. 1EF83
This application note introduces the concept of multistandard radio base stations as well as solutions for transmitter and receiver tests based on Rohde & Schwarz signal generators and Rohde & Schwarz signal and spectrum analyzers.
06-Jul-2012 | AN-No. 1MA198
This application note shows how to configure, calibrate and perform conducted EMS measurements according to IEC / EN 61000-4-6 and EMI measurements according to CISPR 16-2-1 with the R&S®EMC32 software tool.
19-Jul-2013 | AN-No. 1MA212
Binary transfer with remote instruments, like the KPI-1200 Series of remote instruments. Learn about the various methods of remote binary transfer, like the KPI-1200, X-20 Series and KPI-2100 Series of instruments in this article.
31-Mar-2022 | AN-No. 1SL381
This paper describes the Pulsed RF Calculator that suggests spectrum analyzer settings to calculate pulse desensitization.
24-Sep-2015 | AN-No. 1MA240
In this whitepaper we introduce the NB-IoT technology with an emphasis on the tight connection to LTE.
08-Aug-2016 | AN-No. 1MA266
This application note explains the background of blind time and points out why a high acquisition rate is important. It furthermore explains the R&S RTO oscilloscope capabilities and how they help for faster debugging, measurement and analysis.
17-May-2011 | AN-No. 1ER02
With IT and OT environments converging, security concerns relating to devices and applications deployed in networked test labs, especially in T&M environments, are growing. The demands on IT security here are manifold and include, for example, remote access to in-house infrastructures, equipment rented from external providers, and the continuous deployment of devices across different time zones.
18-Oct-2022
This application note describes the tests performed with additional equipment and presents straightforward solutions based on the R&S®CBTgo software.
18-Jul-2013 | AN-No. 1MA200
LTE Location Based Services (LBS) involve the process of determining where a device is located.
29-May-2015 | AN-No. 1SP05
This application note describes the tests performed with additional equipment and presents straightforward solutions based on the CBTgo software.
06-Mar-2013 | AN-No. 1MA106
This application note discusses several basic methods for reading and displaying measurement results from EMI test receivers. The included free programming example is small and easily comprehended, so that users can quickly learn how to program test receivers.
01-Dec-2012 | AN-No. 1MA185
This white paper introduces the fundamental theory behind beamforming antennas, calculation methods and measurement results for linear arrays.
15-Sep-2016 | AN-No. 1MA276
This white paper provides an introduction to the technology behind WLAN 802.11ad and highlights the test and measurement requirements.
21-Nov-2013 | AN-No. 1MA220
Joint solutions of R&S® and COMPRION®
This application note describes the eUICC compliance and remote eUICC provisioning test solution based on R&S® CMW500/CMW290 and COMPRION® eUICC Profile Manager software tool.
03-Jun-2020 | AN-No. GFM342
The R&S®RTO Oscilloscope supports the acquisition and the detailed signal analysis of these signals by using the history mode. The history mode allows the user to look back to previous acquisitions and apply the wide set of analysis functions of the RTO.
03-Jun-2013 | AN-No. 1TD02
Customize blocking tests and make sure to address parameters like frequency positions, levels or bandwidths when verifying RF device performance.
31-Oct-2019
This application note describes a method using the R&S ZVA to measure group delay of mixers and frequency converters with an embedded local oscillator very accurately.
27-Aug-2012 | AN-No. 1EZ60
This application note shows how to perform LTE terminal block error rate (BLER) and throughput tests under fading conditions with the R&S®CMW500 Protocol Tester and the R&S®AMU200A Fading Simulator.
27-Mar-2012 | AN-No. 1MA177
radiated conformance testing according to TS 38.141-2, Rel. 16
This application note describes all mandatory radiated RF transmitter tests (TS 38.141-2, chapter 6), according to Release 16.
20-Dec-2019 | AN-No. GFM324
This application note explains how to detect, characterize, find and document interferers in cellular networks using the R&S®FSH spectrum analyzer.
21-Oct-2014 | AN-No. 1EF89
This application note describes how to integrate R&S®ZVA/ZVB/ZVT vector network analyzers with AWR's electronic design automation (EDA) software. Measured data can be exported using the AWR® TestWave™ tool via GPIB/LAN and verified with simulated data.
01-Jun-2010 | AN-No. 1MA163
This application note describes how to generate and analyze wideband digitally modulated signals in the mm-wave range. Rohde & Schwarz measuring equipment and some 3rd party off-the-shelf accessories are used for both signal generation and analysis.
02-Sep-2014 | AN-No. 1MA217
This application note describes the techniques to measure the dielectric properties of materials using a vector network analyzer. It also shows methods for converting the s-parameters to dielectric properties.
23-May-2012 | AN-No. RAC-0607-0019
LTE-Advanced Technology Introduction
20-Aug-2012 | AN-No. 1MA169
RMS is one of the most common parameters in test and measurement. Mathematically, it is the quadratic mean of continuously varying values (waveform). R&S RTM-K32 option provides a digital RMS conversion function for a high-bandwidth RMS measurement.
17-Aug-2015
This application note describes how to use the LTE Frequency Division Duplex (FDD) and Time Division Duplex (TDD) measurement functionality provided by the R&S®CMW500 wideband radio communication tester to perform LTE transmitter and receiver measurements.
17-May-2013 | AN-No. 1CM94
Operating manuals commonly focus on explaining a dedicated feature of a single instrument. This application note examines a range of typical user tasks and how to solve them with the different instruments.
26-Apr-2013 | AN-No. 1GP72
This application note describes the differences in sweep speed between swept spectrum analyzers and modern spectrum analyzers with a wide-band FFT process, and how this improves the measurement speed for general spurious measurement.
10-Jul-2012 | AN-No. 1EF80