R&S®5G site testing solution: automatic detection and demodulation of 5G NR and LTE signals. No parameter settings necessary.

The R&S®FSWP phase noise analyzer combines low‑noise internal sources and real-time cross‑correlation for high sensitivity phase noise measurements.

Turnkey over-the-air (OTA) solution for antenna, cellular and non-cellular testing.

The R&S®TS-PIO2 analog and digital I/O module is a 16-channel stimulus and a 16-channel parametric measurement unit for versatile DUT testing. It is part of the R&S®TSVP modular test and measurement platform and makes full use of the common analog measurement bus and the standardized isolated frontend technology. The required floating R&S®TS-PDC rear I/O DC supply module is included in the R&S®TS-PIO2.

The R&S®SAM100 system amplifier - an ultra-broadband solid state microwave amplifier with outstanding linearity and very good noise characteristics in frequency range from 2 GHz to 20 GHz.

The R&S®BBA300 is a robust, compact, ultra-wide band amplifier for use in critical test environments such as EMC, product validation and OTA coexistence in the frequency range of 380 MHz to 18 GHz and RF output power up to 300 W P1dB.

The R&S®BBL200 is a liquide cooled broadband amplifier for high power application up to 10 kW P1dB in the frequency range of 9 kHz to 250 MHz.

The R&S®BBA130 is the first tunable class A/AB broadband amplifier for the frequency range of 80 MHz to 6 GHz and rf output power up to 13000 W.

The R&S®BBA150 is a robust broadband amplifier for EMC applications in the frequency range of 4 kHz to 6 GHz and rf output power up to 3000 W P1dB.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

Noise figure measurement with vector network analyzers

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

ZNBT true multiport VNA vector network analyzer with up to 24 true VNA ports. Frequency range from 9/100 kHz to 8.5/20/26.5/40 GHz.

The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The R&S®ZNLE is a cost-efficient benchtop vector network analyzer. The analyzer's excellent performance makes it ideal for education, development and production.

The R&S®ZNL is a cost-efficient, portable vector network and spectrum analyzer, ideal for development, production and in the field

The R&S®ZNB vector network analyzer features a wide dynamic range, low trace noise and high output power and is targeted at applications in the electronic goods and mobile radio industries.

R&S®ZVH handheld cable & antenna analyzer increases efficiency in the field. Frequency range from 100 kHz to 3.6 GHz / 8 GHz.

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 port and 4 port models available. ZN-Z51 has configurable test ports.

R&S®ZN-Z1Exx economy calibration units from 5 kHz to 26.5 GHz. Two configurable ports: 3.5 mm-compatible or N-type. Further configurable as m or f.

R&S®FSH handheld spectrum analyzer: the all-in-one handheld platform for installation and maintenance in the field. It has a frequency range from 9 kHz to 3.6/4/8/13.6/20 GHz. Models with and without an internal tracking generator and VSWR bridge are available.

The R&S®Spectrum Rider FPH – handheld spectrum analyzer, frequency range from 5 kHz up to 44 GHz.

Disturbance voltage measurements in the frequency range 9 kHz to 30 MHz

The R&S®TSMx drive and walk test scanner features optimization, troubleshooting and mobile coverage measurements with non-intrusive scanner measurements. Find out more.

The handheld oscilloscope R&S®Scope Rider offers lab performance in a rugged, portable design. The perfect oscilloscope for lab & field measurements. Explore now!

The R&S®RTB 2 oscilloscope is the perfect tool for university laboratories, production and service departments. See more signal details with the power of 10.

R&S®MXO 4 SERIES OSCILLOSCOPE Next generation oscilloscope for accelerated insight

R&S RS5400 radio server – aggregate and split voice streams to optimize bandwidth utilization to and from remotely controlled radio sites