R&S®RTB2000 oscilloscope

R&S®RTB2000 oscilloscope
Open Lightbox
R&S®RTB2000 oscilloscope, side view
Open Lightbox
R&S®RTB2000 oscilloscope
Open Lightbox
R&S®RTB2000 oscilloscope, rear view
Open Lightbox
R&S®RTB2000 oscilloscope, front view
Open Lightbox
R&S®RTB2000 oscilloscope, side view
Open Lightbox
The oscilloscope R&S®RTB2000
Open Lightbox
R&S®RTB2000 oscilloscope R&S®RTB2000 oscilloscope, side view R&S®RTB2000 oscilloscope R&S®RTB2000 oscilloscope, rear view R&S®RTB2000 oscilloscope, front view R&S®RTB2000 oscilloscope, side view The oscilloscope R&S®RTB2000

Key facts

  • Bandwidth: 70 MHz to 300 MHz
  • Sample rate: up to 2.5 Gsample/s
  • Memory depth: up to 20 Msample
  • ADC resolution: 10 bit
  • Display: 10.1" capacitive touchscreen

Starting at EUR1,250

  • R&S oscilloscopes | 3 years warranty extension

More signal details with the power of 10

Power of ten (10-bit ADC, 10 Msample memory and 10.1" touchscreen) combined with smart operating concepts make the R&S®RTB2000 oscilloscopes the perfect tool for university laboratories, for troubleshooting embedded designs during development and for production and service departments.

I    Four times more vertical resolution than standard 8-bit ADCs.
I    Maintains fast sampling rates at all times
I    Largest display with highest resolution in its class

Features & benefits

Signal analysis: quick results

See small signal details in the presence of large signals

The R&S®RTB2000 features a customized Rohde & Schwarz engineered 10-bit A/D converter that delivers a fourfold improvement compared to conventional 8-bit A/D converters. The increased resolution results in sharper waveforms with more signal details that would otherwise be missed. One example is the characterization of switched-mode power supplies. The voltages across the switching device must be determined during the on/off times within the same acquisition.

RTB2000 Oscilloscope
Open Lightbox

10-bit A/D converter

The Rohde & Schwarz designed 10-bit A/D converter ensures highest signal fidelity at highest resolution.

Capture more time at full bandwidth

10 Msample standard and 20 Msample interleaved

The R&S®RTB2000 offers a class-leading memory depth: 10 Msample per channel are available, even 20 Msample in interleaved mode. This is 10 times more than similar oscilloscopes in the same instrument class. The user captures longer acquisition sequences even at high sampling rates, e.g. when analyzing transients of switched-mode power supplies, and thus benefits from more detailed analysis results.

RTB2000 Oscilloscope
Open Lightbox

10 Msample standard memory

Capture and analyze pulsed and burst signals over a long period with up to 20 Msample standard acquisition memory.

Segmented memory

160 Msample with history function

The R&S®RTB-K15 option with deep, segmented memory analyzes signal sequences over a long observation period. Protocol-based signals with communications gaps such as I²C or SPI can be captured over several seconds or minutes. Thanks to the variable segment size, the 160 Msample memory is optimally utilized. In history mode, previous acquisitions to the maximum segmented memory depth of 160 Msample are available for further analysis.

RTB2000 Oscilloscope
Open Lightbox

160 Msample segmented memory

Capture the longest time periods with class-leading 160 Msample memory.

Logic analysis with the MSO option

16 additional digital channels

The R&S®RTB-B1 option turns every R&S®RTB2000 into an intuitive-to-use MSO with 16 additional digital channels. The oscilloscope captures and analyzes signals from analog and digital components of an embedded design – synchronously and time-correlated to each other. For example, the delay between input and output of an A/D converter can conveniently be determined using the cursor measurements.

Open Lightbox

Four-bit DAC signal change.

The R&S®RTB2000 captures and analyzes analog and digital signals synchronously and in time-correlated to each other.

Waveform and pattern generator

Generate analog and digital stimuli

The R&S®RTB-B6 waveform and pattern generator up to 50 Mbit/s is useful for educational purposes and for implementing prototype hardware. Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope waveforms. Predefined patterns for e.g. I2C, SPI, UART and CAN/LIN can be used.

Open Lightbox

Waveform and pattern generator

In addition to common sine, square/pulse, ramp and noise waveforms, it outputs user-defined waveforms and 4-bit signal patterns.

Digital voltmeter

Measure and display electrical potential

The R&S®RTB2000 features a 3-digit voltmeter (DVM) and 6-digit frequency counter on each channel for simultaneous measurements. Measurement functions include DC, AC+DC (RMS) and AC (RMS) – included as standard.

RTB2000 Oscilloscope
Open Lightbox

Digital voltmeter

The 3-digit voltmeter measures and displays the electrical potential difference between two points in an electric circuit.

Frequency analysis mode

Difficult-to-find faults often result from the interaction between time and frequency signals. The FFT function of the R&S®RTB2000 is activated at the push of a button and by simpling entering the center frequency and span. Thanks to the R&S®RTB2000 oscilloscopes’ high-performance FFT functionality, signals can be analyzed with up to 128 kpoints. Other practical tools include cursor measurements and autoset in frequency domain.

Open Lightbox

Frequency analysis mode

The high-performance FFT functionality analyzes signals up to 128 kpoints.

Mask test mode

Mask tests quickly reveal whether a specific signal lies within defined tolerance limits. By using statistical pass/fail evaluation, they assess quality and stability of a DUT. Signal anomalies and unexpected results are quickly identified. When the mask is violated, the measurement stops. Each violation can generate a pulse output at the AUX-OUT connector on the R&S®RTB2000. This pulse output can be used to trigger actions in the measurement setup.

RTB2000 Oscilloscope
Open Lightbox

Mask test with result statistics

The pass/fail evaluation assesses the quality and stability of the DUT.

Ready for the teaching lab

In the teaching lab, the R&S®RTB2000 oscilloscope is the perfect choice to teach students how to measure with an oscilloscope. It has an easy-to-use concept combined with state-of-the-art technology – at an affordable price. The large 10.1" high-resolution screen shows every signal detail, and one instrument can be shared among several students. Reports can be efficiently created with the handy and flexible screen annotation tool.

RTB2000 Oscilloscope
Open Lightbox

Ready for the teaching lab

Perfect instruments for everyday use at universities and colleges thanks to diverse functionality, rugged design and small footprint.

Available models

  • Product Name

    R&S®RTB2002

    Order number 1333.1005.02

    Bandwidth
    70 MHz
    Channels
    2
    Sample Rate
    2.5 Gsample/s
    Max. Memory Depth
    20 Msample
    Optional MSO
    16 digital channels
    Starting at
  • Product Name

    R&S®RTB2004

    Order number 1333.1005.04

    Bandwidth
    70 MHz
    Channels
    4
    Sample Rate
    2.5 Gsample/s
    Max. Memory Depth
    20 Msample
    Optional MSO
    16 digital channels
    Starting at
  • Product Name

    R&S®RTB2002 + RTB-B221

    Order number 1333.1005P12

    Bandwidth
    100 MHz
    Channels
    2
    Sample Rate
    2.5 Gsample/s
    Max. Memory Depth
    20 Msample
    Optional MSO
    16 digital channels
    Starting at
  • Product Name

    R&S®RTB2004 + RTB-B241

    Order number 1333.1005P14

    Bandwidth
    100 MHz
    Channels
    4
    Sample Rate
    2.5 Gsample/s
    Max. Memory Depth
    20 Msample
    Optional MSO
    16 digital channels
    Starting at
  • Product Name

    R&S®RTB2002 + RTB-B222

    Order number 1333.1005P22

    Bandwidth
    200 MHz
    Channels
    2
    Sample Rate
    2.5 Gsample/s
    Max. Memory Depth
    20 Msample
    Optional MSO
    16 digital channels
    Starting at
  • Product Name

    R&S®RTB2004 + RTB-B242

    Order number 1333.1005P24

    Bandwidth
    200 MHz
    Channels
    4
    Sample Rate
    2.5 Gsample/s
    Max. Memory Depth
    20 Msample
    Optional MSO
    16 digital channels
    Starting at
  • Product Name

    R&S®RTB2002 + RTB-B223

    Order number 1333.1005P32

    Bandwidth
    300 MHz
    Channels
    2
    Sample Rate
    2.5 Gsample/s
    Max. Memory Depth
    20 Msample
    Optional MSO
    16 digital channels
    Starting at
  • Product Name

    R&S®RTB2004 + RTB-B243

    Order number 1333.1005P34

    Bandwidth
    300 MHz
    Channels
    4
    Sample Rate
    2.5 Gsample/s
    Max. Memory Depth
    20 Msample
    Optional MSO
    16 digital channels
    Starting at
Specifications
Vertical system
Number of channels R&S®RTB2002 ; R&S®RTB2004 2; 4
Bandwidth (–3 dB) R&S®RTB2002/2004 (with R&S®RTB-B2x1, R&S®RTB-B2x2 and R&S®RTB-B2x3 options) 70 MHz, 100 MHz, 200 MHz, 300 MHz
Rise time (calculated) R&S®RTB2002/2004 (with R&S®RTB-B2x1, R&S®RTB-B2x2 and R&S®RTB-B2x3 options) 5 ns, 3.5 ns, 1.75 ns, 1.15 ns
Input impedance   1 MΩ ± 2% with 19 pF ± 2 pF (meas.)
input sensitivity max. bandwidth in all ranges 1 mV/div to 5 V/div
DC gain accuracy offset and position = 0, maximum operating temperature change of ±5°C after self-alignment
  input sensitivity > 5 mV/div ± 1.5% of full scale
  input sensitivity ≤ 5 mV/div ± 2% of full scale
ADC resolution   10-bit, up to 16-bit with high resolution decimation
Acquisition system
Maximum realtime sampling rate   1.25 Gsample/s; 2.5 Gsample/s, interleaved
Acquisition memory standard; with R&S®RTB-K15 option 10 Msample; 20 Msample, interleaved;
160 Msample segmented memory
Horizontal system
Timebase range   selectable between 1 ns/div and 500 s/div
Trigger system
Trigger types standard edge, width, video (PAL, NTSC, SECAM, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p), pattern, line, serial bus
  option I2C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN
Analysis and measurement functions
QuickMeas at the push of a button, measurement values are continuously written onto the waveform peak-to-peak voltage, pos. peak, neg. peak, rise time, falltime, mean value, RMS value, time, period, frequency
Waveform mathematics   addition, subtraction, multiplication, division, FFT
MSO option
Digital channels   16 (2 logic probes)
Sampling rate   1.25 Gsample/s
Acquisition memory   10 Msample
Waveform generator
Resolution, sample rate   14-bit, 250 Msample/s
Amplitude high-Z; 50 Ω 20 mV to 5 V (Vpp); 10 mV to 2.5 V (Vpp)
DC offset high-Z; 50 Ω ±2.5 V; ±1.25 V
Signal forms frequency ranges sine 0.1 Hz to 25 MHz
  pulse/rectangle 0.1 Hz to 10 MHz
  ramp/triangle 0.1 Hz to 1 MHz
  noise max. 25 MHz
Arbitrary sampling rate; memory depth max. 10 Msample/s; 16k point
General data
Screen   10.1" WXGA TFT color display (1280 × 800 pixel)
Interfaces   USB host with MTP, USB device, LAN, powerful web server for remote display and operation
Audible noise maximum sound pressure level at a distance of 1.0 m 28.3 dB(A)
Dimensions W × H × D 390  mm × 220 mm × 152 mm
(15.4 in × 8.66 in × 5.98 in)
Weight   2.5 kg (5.5 lb)

Available options

General
Product Description
RTB-B1 Mixed Signal Upgrade for non-MSO models

R&S®RTB-B1

Order number 1333.1105.02

Description

Mixed signal upgrade for non-MSO models, 300 MHz

Turns the R&S®RTB2000 oscilloscope into fast, precise and easy-to-use mixed signal oscilloscopes (MSO).

RTB-B6 Arbitrary Waveform Generator

R&S®RTB-B6

Order number 1333.1111.02

Description

Arbitrary waveform generator

Adds an 25 MHz signal generator and a 4-bit pattern generator to your R&S®RTB2000 oscilloscope

Bandwidth upgrade
Product Description
Bandwidth.svg

R&S®RTB-B221

Order number 1333.1163.02

Description

Bandwidth upgrade of the R&S®RTB2002 to 100 MHz bandwidth

Bandwidth.svg

R&S®RTB-B222

Order number 1333.1170.02

Description

Bandwidth upgrade of the R&S®RTB2002 to 200 MHz bandwidth

Bandwidth.svg

R&S®RTB-B223

Order number 1333.1186.02

Description

Bandwidth upgrade of the R&S®RTB2002 to 300 MHz bandwidth

Bandwidth.svg

R&S®RTB-B241

Order number 1333.1257.02

Description

Bandwidth upgrade of the R&S®RTB2004 to 100 MHz bandwidth

Bandwidth.svg

R&S®RTB-B242

Order number 1333.1263.02

Description

Bandwidth upgrade of the R&S®RTB2004 to 200 MHz bandwidth

Bandwidth.svg

R&S®RTB-B243

Order number 1333.1270.02

Description

Bandwidth upgrade of the R&S®RTB2004 to 300 MHz bandwidth

Serial triggering and decoding
Product Description
Digital-Oscilloscope-Software-Triggering-and-Decoding-RTx-K1.jpg

R&S®RTB-K1

Order number 1333.1011.02

Description

I²C/SPI serial triggering and decoding

Triggering and decoding of I²C and 2-wire, 3-wire or 4-wire SPI buses

Oscilloscope-Software-Serial-Triggering-and-Decoding-RTx-K2_UARTRS-232RS-422RS-485_uart.jpg

R&S®RTB-K2

Order number 1333.1028.02

Description

UART/RS-232/RS-422/RS-485 serial triggering

Triggering and decoding of UART based protocols and RS-232, RS-422 as well as RS-485 buses

RTB-K3 CAN/LIN Serial Triggering and Decoding

R&S®RTB-K3

Order number 1333.1034.02

Description

CAN/LIN serial triggering and decoding

Triggering and decoding of CAN and LIN interfaces

General analysis
Product Description
History and Segmented Memory

R&S®RTB-K15

Order number 1333.1040.02

Description

History and segmented memory

History and 160 Msample segmented memory

General accessories
Product Description
Front Cover

R&S®RTB-Z1

Order number 1333.1728.02

Description

Front cover

Protects the front of the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000

Soft Bag

R&S®RTB-Z3

Order number 1333.1734.02

Description

Soft bag

Stores the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 oscilloscope and accessories

ZZA-RTB2K

R&S®ZZA-RTB2K

Order number 1333.1711.02

Description

19" rackmount adapter for R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 with 5HU

RT-ZA19 Accessory case

R&S®RT-ZA19

Order number 1335.7875.02

Description

Accessory case for probes and small parts for all Rohde and Schwarz oscilloscopes

Passive probes
Product Description
RT-ZP03 Passive probe

R&S®RT-ZP03

Order number 3622.2817.02

Description

Passive probe, 300 MHz, 10:1/1.1

RT-ZP05 Passive probe

R&S®RT-ZP05

Order number 3623.2927.02

Description

Passive probe

500 MHz, passive, 10:1, 10 MΩ, 5 mm tip

 RT-ZP10 Passive probe

R&S®RT-ZP10

Order number 1409.7550.00

Description

Passive probe, 500 MHz, 10:1

RT-ZP1x Passive probe

R&S®RT-ZP1X

Order number 1333.1370.02

Description

Passive probe, 38 MHz, 1:1

Active differential probes
Product Description
RT-ZD01 High voltage probe

R&S®RT-ZD01

Order number 1422.0703.02

Description

100 MHz high voltage differential probe

RT-ZD02 Active differential probe, 200 MHz, BNC interface

R&S®RT-ZD02

Order number 1333.0821.02

Description

Active differential probe, 200 MHz, BNC interface

High voltage probes
Product Description
RT-ZH03 - 250 MHz Passive high voltage probe

R&S®RT-ZH03

Order number 1333.0873.02

Description

250 MHz passive high voltage probe

RT-ZH10 High voltage probe

R&S®RT-ZH10

Order number 1409.7720.02

Description

400 MHz passive high voltage probe

RTZH10_front.jpg

R&S®RT-ZH11

Order number 1409.7737.02

Description

400 MHz passive high voltage probe

Logic probes
Product Description
RT-ZL03 300 MHz logic probe, 8 channels

R&S®RT-ZL03

Order number 1333.0715.02

Description

300 MHz logic probe, 8 channels

Probe accessories
Product Description
RT-ZC02 AC/DC 20 KHZ Current probe

R&S®RT-ZC02

Order number 1333.0850.02

Description

AC/DC 20 kHz current probe

RT-ZC03 100 KHZ Current probe

R&S®RT-ZC03

Order number 1333.0844.02

Description

100 kHz current probe

RT-ZC10 10 MHz Current probe

R&S®RT-ZC10

Order number 1409.7750K02

Description

10 MHz current probe

RT-ZC20 20 MHz Current probe

R&S®RT-ZC20

Order number 1409.7766K02

Description

100 MHz current probe

RT-ZC30 120 MHz Current probe

R&S®RT-ZC30

Order number 1409.7772K02

Description

120 MHz current probe

RT-ZA13 Power supply for probes

R&S®RT-ZA13

Order number 1409.7789.02

Description

Power supply for probes

Power supply for R&S®RT-ZC10/20/30 probes, +/-12V DC, +/-2.5A

Application bundles
Product Description
Application bundle

R&S®RTB-PK1

Order number 1333.1092.02

Description

Application bundle (R&S®RTB-K1, -K2, -K3, -K15 and –B6)

Application bundle contains triggering and decoding I²C/SPI (R&S®RTB-K1), UART/RS-232(RS-422/RS-485 (R&S®RTB-K2) and CAN/LIN (R&S®RTB-K3), history and segmented memory (R&S®RTB-K15), arbitrary generator (R&S®RTB-B6) for R&S®RTB2000 models

R&S®RTB2000 - Media center

  • RTB2000 - 10 bit ADC
    10 bit ADC to see small signal details in the presence of large signals
  • RTB2000 - 10 Msample memory
    10 Msample memory to capture more time at full bandwidth
  • RTB2000 - high-resolution capacitive touchscreen
    10.1" high-resolution capacitive touchscreen with gesture support

Solution for

  • Analog/digital design and test

    Check out Rohde & Schwarz solutions for signal and power integrity, measurement of small signals, and EMI debugging.

    More information

  • Automotive network testing

    Debug all protocol networks commonly used in the automotive industry.

    More information

Oscilloscope portfolio

  • Oscilloscopes

    Oscilloscopes that fit your requirements and your budget, from top value to top performance.

    More information

  • Oscilloscope software

    Select from a wide range of protocol triggering and decode apps, compliance testing apps, and analysis software.

    More information

  • Oscilloscope probes

    Customize your oscilloscope with the right probes and accessories for your application.

    More information

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

I want to receive information from Rohde & Schwarz via

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.