R&S®SMR Microwave Signal Generator

This option provides a highly accurate reference frequency with a very low aging rate.

This option offers 0.1 Hz frequency resolution for R&D purposes.

This option provides an analog frequency sweep fully synthesized. The maximum sweep speed is 600 MHz/ms in the range from 2 to 10 GHz.

This option allows amplitude and frequency modulation internally or externally. ASK and FSK use the external inputs to modulate data up to 200 kHz for ASK or 2 MHz for FSK modulation.

This option extends the low-end frequency of the basic unit from 2 GHz down to 10 MHz.

This option provides a high-quality pulse generator featuring a pulse width and pulse delay of 20 ns to 1 s. Double pulses can also be generated. External pulse modulation with the built-in pulse modulator is always possible.

This set of options provides a high level range from –130 dBm ( -110 dBm for the R&S SMR50/60) up to the maximum output power. The precision of the output level is also increased.

This set of options provides a high level range from –130 dBm ( -110 dBm for the R&S SMR50/60) up to the maximum output power. The precision of the output level is also increased.

This set of options moves the RF and AF connectors to the rear panel of the instrument.

This set of options moves the RF and AF connectors to the rear panel of the instrument.

This set of options provides an IF input on the rear panel of the instrument to upconvert any modulated signal up to 40 GHz: IF = 0 to 700 MHz, LO = 0 to 20 GHz

This set of options provides an IF input on the rear panel of the instrument to upconvert any modulated signal up to 40 GHz: IF = 0 to 700 MHz, LO = 0 to 40 GHz

This set of options provides an IF input on the rear panel of the instrument to upconvert any modulated signal up to 40 GHz: IF = 40 MHz to 6 GHz, LO = 0 to 20 GHz