100/1000BASE-T1 software

Triggering and decoding

100/1000BASE-T1 software
Open Lightbox
100/1000BASE-T1 software
Open Lightbox
100/1000BASE-T1 software
Open Lightbox
100/1000BASE-T1 software
Open Lightbox
100/1000BASE-T1 software, Software 100/1000BASE-T1 software, Screenshot 100/1000BASE-T1 software, Screenshot 100/1000BASE-T1 software, Screenshot

Key facts

  • Trigger and decode of 100BASE-T1/BroadR-Reach® and 1000BASE-T1 automotive Ethernet buses
  • Colour coded bus display with details down to ternary symbols
  • Full decode table with all details
  • Powerful trigger and search capability
  • Fast eye-diagram mask testing with up to 600.000 waveforms/secs
  • Multi-domain icon

Oscilloscope software

The R&S®RTP and R&S®RTO oscilloscope supports serial triggering and decoding of 100BASE-T1 or BroadR-Reach and 1000BASE-T1 Automotive Ethernet standards. Efficiently trigger on frame start, Idle frames, MAC frames including destination & source address, frame types and on various error conditions.

Features & benefits

Fast bus setup

Bus setup in seconds with the app cockpit

Starting from the app cockpit, it only takes a few steps to configure any given protocol. Once the bus to decode has been chosen, the connected channels selected and the correct levels set, decoding begins automatically.

Open Lightbox

Bus decoding selection with the app cockpit

Simultaneous decoding of both Ethernet data streams

Best fixture: R&S®RT-ZF5

The R&S®RT-ZF5 fixture allows you to decode both the forward and reverse data streams of either 100BASE-T1 or 1000BASE-T1 at the same time. You can compensate the directivity of the fixture to obtain accurate decoding results.

Open Lightbox

Decoded frames are color-coded

Decode all important decode layers

Decoding on ternary signals, scrambled, descrambled or reversed bits

You can analyze the decoded bus on different decode layers. Most important is the ternary signals to directly correlate the decoding to the electrical signal. For further analysis, you can additionally show the scrambled and descrambled bits.

Open Lightbox

Decoded frames are color-coded

Color-coded telegram display

Telegram display as color-coded bus signals and in decode table

You can analyze the decoded bus frames by overlaying the signal with color-coded data. Address and data content can be displayed in hex, bin or ASCII format. You always have the best overview with the flexible screen setup. The protocol details can also be displayed in a concise table. Select the data format and decode layer that best fits your analysis needs.

Open Lightbox

Decoded frames are color-coded

Strong trigger capability

Strong trigger capability on frame start, idle frame, MAC frame and addresses, frame type and data and various error conditions.

The protocol-specific trigger lets you reliably isolate protocol events and errors. Thanks to high acquisition rates, Rohde & Schwarz oscilloscopes are ideal for finding errors quickly, allowing decoding of protocol-specific trigger results. The hardware-based triggering is available on specific protocol content, e.g. addresses, data and protocol errors. 

Open Lightbox

Protocol trigger setup dialog

Search and navigate in recorded acquisitions

Powerful search and navigate capability

Comprehensive search functions simplify the analysis of long signal sequences. You can search for waveforms based on different criteria, such as signal faults or protocol content. All detected events are shown in a table with timestamps. The individual events can be examined in a zoom window with simple navigation between events.

Open Lightbox

Powerful searching, even in long recordings

Available models

Available models
Models
Serial standard
Decode table
Trigger
Label support
Search
Base unit

R&S®RTE-K57

Order number 1333.0615.02

Serial standard
100Base-T1
Decode table
Trigger
Label support
Search
Base unit

R&S®RTO-K57

Order number 1333.0596.02

Serial standard
100Base-T1
Decode table
Trigger
Label support
Search
Base unit

R&S®RTP-K57

Order number 1800.6548.02

Serial standard
100Base-T1
Decode table
Trigger
Label support
Search
Base unit

R&S®RTP-K58

Order number 1800.6702.02

Serial standard
1000Base-T1
Decode table
Trigger
Label support
Search
Base unit

R&S®RTO-K58

Order number 1801.4503.02

Serial standard
1000Base-T1
Decode table
Trigger
Label support
Search
Base unit

Available options

Test fixtures
Product
Description
R&S®RT-ZF5

Order number 1333.0896.02

Description

Ethernet Probing Fixture

(directional, link partner, load)

R&S®RT-ZF7

Order number 1801.3688.02

Description

Automotive T&D Fixture

Automotive Ethernet probing fixture including 2 SMA adapters RT-ZF7A

More information

Triggering & decoding 100Base-T1 BroadR-Reach Ethernet

Triggering & decoding 100Base-T1 BroadR-Reach Ethernet

Triggering & decoding real-world OABR automotive Ethernet with an oscilloscope.

More information

Triggering and decoding fast channel and slow channel of the SENT bus

Triggering and decoding fast channel and slow channel of the SENT bus

Discover how to decode SENT, including enhanced serial messages, displayed on an R&S®RTO.

More information

Debug CAN flexible data CAN-FD interfaces with an oscilloscope

Debug CAN flexible data CAN-FD interfaces with an oscilloscope

Discover how to debug CAN-FD, as displayed on an R&S®RTO.

More information

Symbolic decoding of a SENT bus

Symbolic decoding of a SENT bus

Discover how to set up symbolic decoding of a SENT bus, as displayed on an R&S®RTO.

More information

Decoding SENT bus with a handheld oscilloscope

Decoding SENT bus with a handheld oscilloscope

Discover how to easily deocde SENT using an R&S®RTH handheld oscilloscope.

More information

Decoding over three minutes of bus data using deep memory and ultrasegmentation

Decoding over three minutes of bus data using deep memory and ultrasegmentation

Discover how to decode bus data using deep memory and ultrasegmentation, as displayed on an R&S®RTA.

More information

Decoding CAN Flexible Data CAN-FD bus with a handheld oscilloscope

Decoding CAN Flexible Data CAN-FD bus with a handheld oscilloscope

Discover how to easily deocde CAN-FD using an R&S®RTH handheld oscilloscope.

More information

Decoding SENT bus signal

Decoding SENT bus signal

Discover how to easily deocde SENT using Rohde & Schwarz oscilloscopes, as displayed on an R&S®RTO.

More information

Serial bus decoding capability with an Oscilloscope

Serial bus decoding capability with an Oscilloscope

Discover the powerful decoding capability of Rohde & Schwarz oscilloscopes, as displayed on an R&S®RTO.

More information

Safe debugging of embedded power supplies

Debug embedded power supplies faster by triggering and decoding their I²C-based control interfaces.

More information

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.