Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
42 Results
This paper reviews the classical spectrum analyzer measurement of L(f) and its shortcomings and discusses how modern phase noise test sets measure phase noise and avoid the limitations imposed by direct spectrum measurements.
31-Mar-2020
The Bluetooth® wireless standard has been an unparalleled success. It has found its way into virtually all smartphones, PCs, cars, entertainment hardware and wearables. Bluetooth SIG reports that more than 8 billion devices are currently in use. Bluetooth supports Internet of Things (IoT) technologies and direction finding methods, making it a sure bet for the future as well.This white paper summarizes the various Bluetooth technologies with a focus on the physical layer in line with core specification version 5.1.
05-Jun-2019 | AN-No. 1MA108
Digital pre-distortion (DPD) is a common method to linearize the output signal of a power amplifier (PA), which is being operated in its non-linear operating range.Most PAs operate in their non-linear range for efficiency reasons. The drawback of higher efficiency is the non-linear operating range. In order to maintain signal quality, many transmitters employ DPD. Implementing real-time DPD in a transmitter is a challenging task and often ends in PA models, which are specific to the signal transmitted.Even though these complex models are required for transmitter development, they are not needed during PA verification and development.This article describes an approach to generate a pre-distorted signal based on a hard-clipper. The resulting waveform pushes the output of the DUT as close to the hard-clipper as possible.Due to the waveform approach, the algorithm compensates all memory effects.
13-Sep-2017 | AN-No. 1EF99
LTE user equipment (UE) receiver performance has significant impact to cellular radio network coverage and capacity. It determines the maximum data throughput across the air interface between the LTE base station (eNB, evolved node B) and the mobile network subscriber UE, thus it determines the total capacity across the air interface. Therefore, it is one of the most important measurements to verify the actual receiver performance of individual devices, and a key metric to compare different devices, in particular.This paper shall give an introduction to receiver performance measurements and discusses the measurement metrics as well as the challenges of over the air (OTA) measurements.
31-Aug-2017 | AN-No. 1ST001
Heinz Mellein, Manuel Mielkech 8NT01 MIMO Channel,Field Measurements,MIMO Evaluation,R&STSMx,R&SROMES Assessing a MIMO Channel Heinz Mellein, Manuel Mielkech 8NT01 MIMO Channel,Field Measurements,MIMO Evaluation,R&STSMx,R&SROMES Related products
31-Aug-2017 | AN-No. 8NT01
Rohde & Schwarz recognizes the potential risk of computer virus infection when connecting Windows®-based test instrumentation to other computers via local area networks (LANs), or using removable storage devices.This white paper introduces measures to minimize malware threats and discusses ways to mitigate risks while ensuring that instrument performance is not compromised.
16-Feb-2017 | AN-No. 1EB01
Rohde & Schwarz recognizes the potential risk of computer virus infection when connecting test instrumentation to Windows®-based computers via local area networks (LANs), or using removable storage devices.This white paper introduces measures to minimize malware threats and discusses ways to reduce risks while ensuring that instrument performance is not compromised. The paper also discusses the use of anti-virus software in combination with Embedded Linux based instruments.
23-Nov-2016 | AN-No. 1GP112
5G networks will need to offer more capacity and flexibility while lowering the operational expenses of the system. Two new technologies can simultaneously address both the increase in capacity and the increase in energy efficiency: Virtualization & Massive MIMO. This white paper provides an overview of test solutions addressing current and future requirements for antenna verification including both conducted and over-the-air (OTA) test methods, which result from applying Massive MIMO antenna technology.This white papers complements the white paper (1MA276) from Rohde & Schwarz, which introduces fundamental theory behind beamforming antennas and provides calculation methods for radiation patterns, a number of simulation results as well as some real world measurement results for small linear arrays.
11-Nov-2016 | AN-No. 1MA286
Rohde & Schwarz recognizes the potential risk of computer virus infection when connecting Windows®-based test instrumentation to other computers via local area networks (LANs), or using removable storage devices.This white paper introduces measures to minimize malware threats and discusses ways to mitigate risks while insuring that instrument performance is not compromised.The paper discusses the use of anti-virus software. It also outlines how to keep the Windows® 10 operating system properly updated through regular installation of OS patches.
23-Sep-2016 | AN-No. 1EF96
Millimeter-wave bands are of increasing interest for the satellite industry and potential 5G bands.Antennas for 5G applications make use of these high frequencies to incorporate a large count of radiating elements. These antenna arrays are essential for beamforming operations that play an important part in such next generation networks.This white paper introduces some of the fundamental theory behind beamforming antennas. In addition to these basic concepts, calculation methods for radiation patterns and a number of real world measurement results for linear arrays are shown.
15-Sep-2016 | AN-No. 1MA276
As part of Release 13, 3GPP has specified a new radio interface, the Narrowband Internet of Things (NBIoT). NB-IoT is optimized for machine type traffic. It is kept as simple as possible in order to reduce device costs and to minimize battery consumption. In addition, it is also adapted to work in difficult radio conditions, which is a frequent operational area for certain machine type communication devices. Although NBIoT is an independent radio interface, it is tightly connected with LTE, which also shows up in its integration in the current LTE specifications.In this whitepaper we introduce the NB-IoT technology with an emphasis on the tight connection to LTE.
08-Aug-2016 | AN-No. 1MA266
Widespread adoption of higher order modulation schemes, larger signal bandwidths and higher operating frequencies, to enable higher data throughput in communication links like 5G, places increasingly tough demands on the frontend. Signal fidelity is often enhanced with linearization.The greater number of RF chains and signal bandwidth in 5G Frontends mean that DPD (Digital Pre-Distortion) may no longer be the default linearization choice; 5G Frontends will be completely different from their 4G predecessors.The key metrics of Efficiency, Linearity, Bandwidth and Output Power remain, as does the question of how to optimally create the signal with just enough fidelity and power, with a minimum of wasted power. The solution set to that question, however, has never been greater.Amongst other topics, this White Paper, (i) proposes a classification of Linearization schemes, (ii) introduces the hard limiter, (iii) illustrates linearization of an exemplary mmWave PA using non-DPD techniques, and (iv) introduces a class of linearized transmitters that create their signal and linearity from efficiently generated components.
25-Feb-2016 | AN-No. 1MA269
In this whitepaper we describe the device to device communication in LTE from a UE point of view. Network elements are described as far as they concern the UE. In addition to the message transmission and reception, a special emphasis is put on the synchronization between UEs and on the security for the message exchange.
29-Sep-2015 | AN-No. 1MA264
This White Paper provides a more detailed view on radar waveforms for Aerospace and Defence and commercial radar systems. Waveforms such as pulse and pulse-Doppler signal, continuous wave and frequency shift keying waveforms are described. It also shows continuous waveform trends designed for specific needs and application differences of continuous wave radar compared to pulse radar systems.
31-Aug-2015 | AN-No. 1MA239
This white paper summarizes significant additional technology components based on LTE, which are included in 3GPP Release 12 specifications. The LTE technology as specified within 3GPP Release 8 was first commercially deployed by end 2009. Since then the number of commercial networks is strongly increasing around the globe. LTE has become the fastest developing mobile system technology ever. As other cellular technologies LTE is continuously worked on in terms of improvements. 3GPP groups added technology components according to so called releases. Initial enhancements were included in 3GPP Release 9, followed by more significant improvements in 3GPP Release 10, also known as LTE-Advanced. Beyond Release 10 a number of different market terms have been used. However 3GPP reaffirmed that the naming for the technology family and its evolution continues to be covered by the term LTE-Advanced. Therefore LTE-Advanced remains the correct description for specifications defined from Release 10 onwards, including 3GPP Release 12.
04-Aug-2015 | AN-No. 1MA252
Multiple input multiple output (MIMO) technology is an integral part of 3GPP E-UTRA long term evolution (LTE). As part of MIMO, beamforming is also used in LTE. This white paper discusses the basics of beamforming and explains the ten downlink and two uplink MIMO transmission modes in LTE Release 12.
10-Jul-2015 | AN-No. 1MA186
LTE Location Based Services (LBS) involve the process of determining where a device is located. Global Navigation Satellite System (GNSS) based solutions are highly accurate and the technology of choice for absolute position accuracy, providing the device has a good line-of-sight, but this is not always the case. A device can be in a highly dense urban environment with reduced satellite visibility or indoors with very low signal levels.These limitations of GNSS systems have meant that LTE cellular based alternatives have been developed within 3GPP Release 9 and onwards.They are described in this white paper.
29-May-2015 | AN-No. 1SP05
This White Paper describes the implementation of real-time capabilities within the R&S®FSW (with option K160R) and the R&S®FSVR. It shows fields of application as well as the technical implementation.
20-Mar-2015 | AN-No. 1EF77
For cable TV, the "last mile" to the connection at the home is the bottleneck that prevents higher data rates. The last mile is made up of optical fiber and coaxial cables, amplifiers and electrical/optical converters. This mix of optical fiber and coaxial cables is known as a hybrid fiber coax (HFC) network. One option for cable network providers to maximize both the downstream (DS) and upstream (US) data throughput using the existing cable TV network, but without making expensive changes to the HFC network infrastructure, is to employ the data over cable service interface specification (DOCSIS) 3.1.This Application Note discusses the fundamental technological advances of DOCSIS 3.1 and presents measurement solutions from Rohde & Schwarz.
02-Mar-2015 | AN-No. 7MH89
Rohde & Schwarz recognizes the potential risk of computer virus infection when con-necting Windows®-based test instrumenta-tion to other computers via local area net-works (LANs), or using removable storage devices.This white paper introduces measures to minimize malware threats and discusses ways to mitigate risks while insuring that instrument performance is not compro-mised.The paper discusses the use of anti-virus software. It also outlines how to keep the Windows® 7 operating system properly updated through regular installation of OS patches.
27-Jan-2015 | AN-No. 1DC01
This white paper describes the basic functionality of antennas. Starting with Hertz's Antenna model followed by a short introduction to the fundamentals of wave propagation, the important general characteristics of an antenna and its associated parameters are explained. A more detailed explanation of the functionality of some selected antenna types concludes this white paper.
04-Nov-2014 | AN-No. 8GE01
Long Term Evolution (LTE) technology has become the technology of choice for keeping up with the requirement of higher throughput in mobile communication in bands below 6 GHz. It is expected that within the next decade LTE will become the primary commercial standard. LTE is often used to broadcast emergency information in times of natural disasters and national crises and is under investigation for further end use application in government as well as military application fields.Communication via LTE has some vulnerabilities. This drawback is a matter of concern since it is possible to completely take down the LTE network or at least partially block communication, intentionally with the help of jamming signals, or unintentionally through various forms of interference.An example of unintentional interference issues is the frequently discussed co-existence issues with Air Traffic Control (ATC) S-band radar and Digital TV bands. The in-device co-existence challenge is also a potentially important issue with the rapid evolution of multi-standard radios.This White Paper will focus on the vulnerabilities of LTE communication by explaining LTE jamming and unintentional interference problems, address the coexistence issues with other services, and discuss the mitigation options to build a broad perspective on the possible deployment of the LTE technology for future military and civil governmental applications.Understanding the susceptance of new technologies to known and expected environments is critical to the adoption for defense applications
16-Sep-2014 | AN-No. 1MA245
Taking the R&S ESR EMI test receiver as an example, this paper looks at a CISPR 16-1-1- compliant test instrument with time domain scanning capabilities. The paper compares the measurement speed and level measurement accuracy of a conventional stepped frequency scan versus an advanced FFT-based time domain scan. It also contains guidance on making optimum use of time domain scans.
29-Jan-2014 | AN-No. 1EE24
Data rates in the range of several Gigabit/s are needed to transmit signals like uncompressed video signals. Amendment 802.11ad to the WLAN standard defines the MAC and PHY layers for very high throughput (VHT) in the 60 GHz range. The specification 802.11-2016 has defined additional modulation and codings schemes for the 11ad single carrier part to increase the data rate. The OFDM part is obsolete.This white paper provides an introduction to the technology behind 802.11ad and highlights the test and measurement requirements.
21-Nov-2013 | AN-No. 1MA220
1xEvolution – Data Optimized (1xEV-DO)is a 3GPP2 “cdma2000® High Rate PacketData Air Interface” specification. Since its introduction (Release 0), Revisions A and B have brought improvements in the data throughput in both directions and in the overall network capacity. This white paper presents the Revision A and B concepts for 1xEV-DO and explains key features.
23-Sep-2013 | AN-No. 1MA213
The LTE technology as specified within 3GPP Release 8 was first commercially deployed by end 2009. Since then the number of commercial networks is strongly increasing around the globe. LTE has become the fastest developing mobile system technology. As other cellular technologies LTE is continuously worked on in terms of improvements. 3GPP groups added technology components into so called releases. Initial enhancements were included in 3GPP Release 9, followed by more significant improvements in 3GPP Release 10, also known as LTE-Advanced. Beyond Release 10 a number of different market terms have been used. However 3GPP reaffirmed that the naming for the technology family and its evolution continues to be covered by the term LTE-Advanced. I.e. LTE-Advanced remains the correct description for specifications defined from Release 10 onwards, including 3GPP Release 12. This white paper summarizes improvements specified in 3GPP Release 11.
09-Jul-2013 | AN-No. 1MA232
Near Field Communication (NFC) is a new short-range, standards-based wireless connectivity technology, that uses magnetic field induction to enable communication between electronic devices in close proximity. Based on RFID technology, NFC provides a medium for the identification protocols that validate secure data transfer. NFC enables users to perform intuitive, safe, contactless transactions, access digital content and connect electronic devices simply by touching or bringing devices into close proximity. This White Paper gives an overview of NFC uses, NFC technology and signals and RF measurements on NFC units. NFC analog measurements with R&S test instruments are described in detail in R&S application Note 1MA190 'Basic Tests of NFC Enabled Devices Using R&S Test Equipment'
03-Jun-2013 | AN-No. 1MA182
High Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access (HSUPA) optimize UMTS for packet data services in the downlink and uplink, respectively. Together, they are referred to as High Speed Packet Access (HSPA). Within 3GPP Release 7, 8, 9 and 10, further improvements to HSPA have been specified in the context of HSPA+ or HSPA evolution. This Application Note describes how HSPA+ features can be tested using Rohde & Schwarz instruments.
26-Apr-2013 | AN-No. 1MA121
This whitepaper provides an overview of the WLAN offload in LTE as standardized by 3GPP, as well as the enhancements for Wi-Fi standardized by IEEE and the Wi-Fi Alliance. It also describes access methods in the joint network, treats the security, and describes IP mobility. In addition network discovery and selection are explained.
10-Dec-2012 | AN-No. 1MA214
Rohde & Schwarz recognizes the potential risk of computer virus infection when connecting Windows®-based test instrumentation to other computers via local area networks (LANs), or using removable storage devices. This white paper introduces measures to minimize malware threats and discusses ways to mitigate risks while insuring that instrument performance is not compromised. The paper discusses the use of anti-virus software, with recommended configuration settings. It also outlines how to keep the Windows® XP operating system properly updated through regular installation of OS patches.
04-Oct-2012 | AN-No. 1EF73