362 Results
Drivers for R&S®CMW500
Wireless device production test: breakthrough in scalability, measurement accuracy, speed. New generation test equipment for wireless devices supporting WiMAX.
LTE D2D ProSe - Direct discovery: overview and RF measurements
It also demonstrates effective RF measurements based on the R&S®CMW500 wideband radio communication tester. Since the R&S®CMW500 emulates the LTE network and the receiving device simultaneously, the correct sending of the discovery message can be verified in addition. Direct discovery is part of LTE device-to-device proximity services (LTE D2D ProSe) standardized in 3GPP Release 12.
R&S®CMW Wideband Radio Communication Tester - Platform overview - Product Brochure
R&S CMW Wideband Radio Communication Tester - Platform overview - Product Brochure
Software for R&S®CMW500 - Production Test
Title Size Version Date CMW-ZASB driver Low-level driver for CMW-ZASB514 kB2.08.28 09.07.2014
Firmware for R&S®CMW500 Protocol Test
Title Versions Last Modified File Size R&S®CMW500 Open Source Acknowledgment for protocol testing 0617.07.20171 MB R&S®CMW500 Protocol Testing Open Source Acknowledgment Open Source Acknowledgment 1177.6498.02 ─ 06 (;ÛÎð2) Contents R&S®CMW500 2 Open Source Acknowledgment 1177.6498.02 ─ 06 Contents 1 Introduction............................................................................6 1.1 Disclaimer
CMW500: Problems during WLAN measurements
Problems during WLAN measurement
Drivers for R&S®CMW500 - Production Test
KG Mühldorfstraße 15 | D - 81671 München Phone + 49 89 4129 - 0 | Fax + 49 89 4129 – 13777 www.rohde-schwarz.com Driver History for the R&S®CMW Wideband Radio Communication Tester Products: | R&S®CMW500 | R&S®CMW270 | R&S®CMW100 Driver history for LabWindows/CVI and VXIplug&play Instrument Driver for C/C++, VEE, etc.
Drivers for R&S®CMW500 Protocol Test
Visual Studio) rscmwgprf GPRF List Mode Measurement Example 1.0.0, 08/2012 12.09.2012C++ (Visual Studio) rscmwgprf GPRF List Mode Measurement Example 1.0.0, 08/2012 12.09.2012VB.NET (Visual Studio) rscmwgprf GPRF Power Measurement Example 1.0.0, 08/2012 12.09.2012rscmwLS LV2010 LTE Signaling Example 1.0.0 20.01.2017 Driver History for the R&S®CMW Wideband Radio Communication Tester Products: | R&S®CMW500
Drivers for R&S®CMW500 - Application Test
Visual Studio) rscmwgprf GPRF List Mode Measurement Example 1.0.0, 08/2012 12.09.2012C++ (Visual Studio) rscmwgprf GPRF List Mode Measurement Example 1.0.0, 08/2012 12.09.2012VB.NET (Visual Studio) rscmwgprf GPRF Power Measurement Example 1.0.0, 08/2012 12.09.2012rscmwLS LV2010 LTE Signaling Example 1.0.0 20.01.2017 Driver History for the R&S®CMW Wideband Radio Communication Tester Products: | R&S®CMW500
Drivers for R&S®CMW500 RF Test
Visual Studio) rscmwgprf GPRF List Mode Measurement Example 1.0.0, 08/2012 12.09.2012C++ (Visual Studio) rscmwgprf GPRF List Mode Measurement Example 1.0.0, 08/2012 12.09.2012VB.NET (Visual Studio) rscmwgprf GPRF Power Measurement Example 1.0.0, 08/2012 12.09.2012rscmwLS LV2010 LTE Signaling Example 1.0.0 20.01.2017 Driver History for the R&S®CMW Wideband Radio Communication Tester Products: | R&S®CMW500
DTMF analysis on CMW500 and CMW290
DTMF analysis on CMW500 and CMW290
Drivers for R&S®CMW500 Protocol Conformance Test
Visual Studio) rscmwgprf GPRF List Mode Measurement Example 1.0.0, 08/2012 12.09.2012C++ (Visual Studio) rscmwgprf GPRF List Mode Measurement Example 1.0.0, 08/2012 12.09.2012VB.NET (Visual Studio) rscmwgprf GPRF Power Measurement Example 1.0.0, 08/2012 12.09.2012rscmwLS LV2010 LTE Signaling Example 1.0.0 20.01.2017 Driver History for the R&S®CMW Wideband Radio Communication Tester Products: | R&S®CMW500
Ping Tests using CMW500 in one LTE cell
Is it possible to set up an IP peer to peer test using CMW500 between a corporate network and one EUT attached to an LTE cell?
R&S®CMW500 Digital IQ with CADENCE Emulator
R&S<sup>®</sup>CMW500 Digital IQ with CADENCE Emulator
30-Jun-2011 | AN-No. 1CM75
CMW500: No more LTE signaling function after LTE firmware update
CMW500: No more LTE signaling function after LTE firmware update
R&S®CMW500 TD-SCDMA Wideband Radiocommunication Tester - Product Flyer
R&S®CMW500 TD-SCDMA Wideband Radiocommunication Tester - Product Flyer
Application Brochure - Bluetooth® Testing with the R&S®CMW
Bluetooth Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure
UE Fading Test with the CMW500 RF Tester and the SMW200A
This application note shows how to perform user equipment (UE) receiver tests, such as block error rate (BLER) and throughput tests, under fading conditions with the R&S®CMW500 RF tester and the R&S®SMW200A vector signal generator in LTE(-A), W-CDMA (HSPA+), TD-SCDMA and GSM (GRPS and EGPRS(2)).
03-Nov-2015 | AN-No. 1MA194
R&S®CMW500 Increase IP connection security of your IoT device - Application Card
R&S CMW500 Increase IP connection security of your IoT device - Application Card
C-V2X Scenario Simulation with R&S CMW500 Wideband Radio Communication Tester
This application Note is based on CMW500, SMBV100B and Vector CANoe.Car2x Software and guides to how to simulate the specific Cellular Vehicle-to-Everything (C-V2X) wireless environment in respect to road transport scenarios and transmitted messages around the Device Under Test (DUT) like a Telematics Control Unit (TCU). It shows how to verify and validate the C-V2X application of the DUT in laboratory environment. The virtual simulation scenario is not limited to the requirements of CSAE53-2017 specification, and it could be modified by user according to this operating guide with CANoe.Vehicle-to-everything (V2X) is a new generation of information and communications technologies that connect vehicles to everything. The objective of V2X is to increase road safety and manage traffic efficiently.C-V2X is designed to offer low-latency vehicle-to-vehicle (V2V), vehicle-to-roadside infrastructure (V2I) and vehicle-to-pedestrian (V2P) communications services to add a new dimension to future advanced driver assistance systems (ADAS). C-V2X as one communications standard defined by 3GPP in Release 14 uses LTE technology as the physical interface for communications. The standard describes two types of communications. The vehicle-to-network (V2N) communications type, exploits the cellular Uu interface, uses traditional cellular link to enable cloud services to be integrated into end-to-end solutions, e.g. to allow road and traffic information for a given area to be distributed to the vehicles.The second type is referred to as direct or PC5/Sidelink (V2V, V2I, V2P) communications, where data transmission takes place over the PC5 interface. In that type, C-V2X does not necessarily require a cellular network infrastructure. It can operate without a SIM and without network assistance and uses GNSS as its primary source for time synchronization.Verifying system functionality and performance exclusively by field testing in a real-world environment can be time-consuming, costly and very challenging. Requirements regarding functionality, and consequently the required assistance functions, are constantly changing. Due to this fact, test solutions are needed during the development and introduction phase to verify compliance with the standards. The PC5 direct communications type allows exchange of time sensitive and safety relevant information. Using a mobile communication tester like the R&S® CMW500 together with a C-V2X scenario simulation tool delivers reproducible test scenarios. This is essential for the standardization of verification processes for C-V2X in order to obtain reliable and comparable results, and it helps to demonstrate that end-to-end functionality between two C-V2X devices from different vendors works properly.
02-Jun-2021 | AN-No. GFM341
WCDMA RF Measurements with the R&S®CMW500 according to 3GPP TS 34.121
WCDMA RF Measurements with the R&S<sup>®</sup>CMW500 according to 3GPP TS 34.121
16-Dec-2011 | AN-No. 1CM95
HSUPA RF Measurements with the R&S®CMW500 in line with 3GPP TS 34.121
HSUPA RF Measurements with the R&S CMW500 in line with 3GPP TS 34.121
27-Nov-2013 | AN-No. 1CM97
HSDPA RF Measurements with the R&S®CMW500 in line with 3GPP TS 34.121
HSDPA RF Measurements with the R&S<sup>®</sup>CMW500 in line with 3GPP TS 34.121
17-Aug-2012 | AN-No. 1CM96
LTE RF measurements with R&S®CMW500 according to 3GPP TS36.521-1
LTE RF measurements with CMW500 according to 3GPP TS36.521-1
17-May-2013 | AN-No. 1CM94
Using R&S®Forum Application for Instrument Remote Control
Using R&S®Forum Application for Instrument Remote Control
28-Jun-2018 | AN-No. 1MA196
LTE Terminal Tests under Fading Conditions with R&S®CMW500 and R&S®AMU200A
LTE Terminal Tests under Fading Conditions with R&S<sup>®</sup>CMW500 and R&S<sup>®</sup>AMU200A
27-Mar-2012 | AN-No. 1MA177
Evolution of Carrier Aggregation (3GPP Release 10 to 13) Poster folded A1*0.87
Evolution of Carrier Aggregation (3GPP Release 10 to 13) - Poster
Bluetooth® LE devices – complete RF characterization
The R&S®CMW wireless communication tester offers an elaborate parametric test concept, including RF test cases, that makes this flexible test platform ideal for designing and verifying Bluetooth® Low Energy (LE) circuits and modules.
27-Jan-2017
R&S®CMWrun - Simple and intuitive solution for highvolume testing
R&S CMWrun Sequencer Software Tool
20-Feb-2015