BEHM provides temporary, mobile security checkpoints in a trailer which can be dispatched to events where non-metallic item screening is needed. QPS Walk2000 by Rohde & Schwarz was chosen as it offers best-in-class detection capabilities via touchless screening with the highest throughput and a unique level of comfort, privacy and health protection by doing away with the need to remove outer garments

Understanding Power Factor Understanding Power Factor

CERTIUM NETWORK - Mediacenter

MXO 4 - See the difference Quickly and reliably trigger and decode packets from your RS232 or RS485 buses using either the analog or digital channels as serial bus inputs. See how you can flexibly configure the trigger, change the data format or display a decode table. Quickly and reliably trigger and decode packets from your RS232 or RS485 buses using either the analog or digital channels as serial

The SFU200A and SFE100 can be used to simulate the performance of many different types of receivers in the SFU200A and SFE100. This paper describes how to use these tools to simulate a correlated receiver using R&S®SFU.

19-Oct-2012 | AN-No. 7BM76

NETLINK

01-Oct-2001 | AN-No. 7TS01

1xEV-DO Revision A + B

23-Sep-2013 | AN-No. 1MA213

This application note describes how to configure a Rohde & Schwarz Network Analyzer to make spectral measurements directly on a device under test.

16-Mar-2012 | AN-No. 1EZ62

Signals produced by SAF and SFF - Standard BG/PAL and N/PAL

20-Jul-2001 | AN-No. 7BM25

This application note focuses on fully automated, fast and accurate measurements, of linear FMCW radar signals. It explains the basic signal processing, the impact on radar key performance indicators in case of linearity deviations and explains test and measurement of linear FMCW signals in detail.

25-Apr-2014 | AN-No. 1EF88

This white paper describes the basic functionality of antennas. Starting with Hertz's Antenna model followed by a short introduction to the fundamentals of wave propagation, the important general characteristics of an antenna and its associated parameters are explained.

04-Nov-2014 | AN-No. 8GE01

MHP and SSU Test, Individual Test of MHP and Software Update Capability of Set-Top Boxes

09-Aug-2004 | AN-No. FTK02

This application note describes how to connect and use the highly popular R&S®NRP-Z family of USB SMART power sensors with the Android application.

04-Jun-2013 | AN-No. 1MA215

Effective Test Procedures for Installing and Maintaining RF Transmitter Sites

31-Jan-2003 | AN-No. 1EF50

A simple concept with Azure IoT

This document describes an approach how to establish a remote connection between the instrument and the cloud using an IoT broker.

15-Dec-2020 | AN-No. GFM319

Rohde & Schwarz ATC voice quality assurance

21-Feb-2019

This application notes shows how to configure, run, and automatically document tests in a sequence coming with EMC32-K51.

17-Jul-2014 | AN-No. 1SP07

Remote Control of STREAM EXPLORER via OLE Interfacing

31-Mar-1999 | AN-No. 7BM02

Driving of I²S Bus Components with Audio Analyzer UPD

03-Apr-1998 | AN-No. 1GA25

A single instrument, the R&S®ETL TV analyzer, performs all required DAB transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.

24-Jul-2013 | AN-No. 7BM104

HSPA+ Technology Introduction - White Paper

14-Feb-2012 | AN-No. 1MA205

This paper shows how to perform a n-port multi-port calibration by using calibration unit with a lower number of ports than available of the vector network analyzer.

06-Feb-2013 | AN-No. 1EZ70

This application notes introduces the Multi-Standard Radio Analyzer function of the R&S®FSW and shows how it performs the measurement on multi-standard radio transmitters.

17-Jul-2012 | AN-No. 1EF83

This application note introduces the concept of multistandard radio base stations as well as solutions for transmitter and receiver tests based on Rohde & Schwarz signal generators and Rohde & Schwarz signal and spectrum analyzers.

06-Jul-2012 | AN-No. 1MA198

This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to perform HSDPA Tests (from Rel.5 up to Rel.8 / DC-HSDPA+) measurements on transmitter characteristics and receiver characteristics in line with TS 34.121 V9.5.0.

17-Aug-2012 | AN-No. 1CM96

This application note describes how to integrate R&S®ZVA/ZVB/ZVT vector network analyzers with AWR's electronic design automation (EDA) software. Measured data can be exported using the AWR® TestWave™ tool via GPIB/LAN and verified with simulated data.

01-Jun-2010 | AN-No. 1MA163

Spectral display of RF analysis of Test Receivers on a PC

18-Jan-2002 | AN-No. 1EE05

This application note describes how to characterize RMS jitter with the R&S FSUP signal source analyzer. The instrument can distinguish random jitter and periodic jitter easily and measure all parameters of interest.

05-Apr-2011 | AN-No. 1EF71

This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.

15-Sep-2012 | AN-No. 1MA206

This application note describes how to generate and analyze wideband digitally modulated signals in the mm-wave range. Rohde & Schwarz measuring equipment and some 3rd party off-the-shelf accessories are used for both signal generation and analysis.

02-Sep-2014 | AN-No. 1MA217