Search Rohde-Schwarz.com
Find the information you need from Rohde & Schwarz. Search for products, technologies, applications, manuals, datasheets, tutorials, FAQs, and more.
10558 Results
Share a 1 GHz reference to obtain phase-coherent signals
A common 1 GHz reference signal maintains high phase stability between the RF outputs of multiple R&S®SGT100A SGMA vector RF sources.
09-Jan-2017
Applications
Webpage, VNC and FTP for Rohde & Schwarz DC power supplies and R&S®LCX LCR meters
Webpage, VNC and FTP for Rohde & Schwarz DC power supplies and R&S®LCX LCR meters
27-Apr-2023
Applications
Quality Measurements on Digital and Analog TV Transmitters - Using the R&S ETL
Quality Measurements on Digital and Analog TV Transmitters - Using the R&S ETL
19-Sep-2007 | AN-No. 7BM67
Applications
Understanding transformer testing
Read this educational note and dive into the discussion about the six most important transformer measurements: turns ratio, mutual inductance, phase angle, primary and secondary inductance, leakage inductance, and interwinding capacitance.
28-Feb-2024
Applications
Test the ON/OFF power of your TD-LTE base station
The R&S®FSQ signal analyzer provides the high dynamic range needed to accurately measure the ON/OFF power of your transmitter in accordance with 3GPP TS 36.141.
17-Jan-2017
Applications
Air navigation ILS system’s antenna alignment using the R&S®ZNH
The R&S®ZNH handheld vector network analyzer with a built-in source allows fast, convenient on-site measurements on the ILS antenna system.
09-Aug-2021
Applications
Output Power Measurement on Noise Sources
This application note describes a technique to perform a calibrated noise power measurement (P_hot) with spectrum analyzers and noise sources.
31-May-2022 | AN-No. 1EF113
Applications
Phase Noise Measurements with Spectrum Analyzers of the FSE family
Phase Noise Measurements with Spectrum Analyzers of the FSE family
16-Jan-2002 | AN-No. 1EF16
Applications
UE Fading Test with the CMW500 RF Tester and the SMW200A
This application note shows how to perform user equipment (UE) receiver tests, such as block error rate (BLER) and throughput tests, under fading conditions with the R&S®CMW500 RF tester and the R&S®SMW200A vector signal generator in LTE(-A), W-CDMA (HSPA+), TD-SCDMA and GSM (GRPS and EGPRS(2)).
03-Nov-2015 | AN-No. 1MA194
Applications
R&S IMS Hardware Setup according IEC / EN 61000-4-3 (radiated immunity)
R&S IMS Hardware Setup according IEC / EN 61000-4-3 (radiated immunity)
29-Mar-2007 | AN-No. 1SP32
Applications
Testing LTE-A Releases 11 and 12
LTE is under continuous development. Release 10 (LTE-Advanced) introduced carrier aggregation (CA) as the primary enhancement. Releases 11 and 12 add several new components to LTE. Some are enhancements to existing features (such as improvements to CA), while others are completely new concepts, such as coordinated multipoint (CoMP).This application note summarizes the Rohde & Schwarz test solutions for LTE-Advanced according to Releases 11 and 12 using vector signal generators, signal and spectrum analyzers and the wideband radio communication tester.
14-Jul-2016 | AN-No. 1MA272
Applications
Ease DOCSIS 3.1 CM and CMTS PHY testing
The R&S®FSW signal and spectrum analyzer offers fast and easy-to-use transmitter testing for the demanding DOCSIS 3.1 cable modem (CM) and cable modem termination system (CMTS) requirements.
12-Apr-2016
Applications
Bluetooth® LE devices – complete RF characterization
The R&S®CMW wireless communication tester are ideal for designing and verifying Bluetooth® Low Energy (LE) circuits and modules.
27-Jan-2017
Applications
Automotive mobility testing with R&S®CMWcards
Automotive mobility testing with R&S®CMWcards
09-Apr-2019
Applications
Measurements on A/D Converters with Audio Analyzer UPL or UPD
Measurements on A/D Converters with Audio Analyzer UPL or UPD
26-Jun-1998 | AN-No. 1GA30
Applications
R&S®VCS-4G for geographically distributed voice communications systems
R&S VCS-4G for geographically distributed voice communications systems.
17-Jun-2013
Applications
CM360°
A turnkey 5G Field-to-Lab solution based on R&S®CMX500
On the path to the 5G NR network commercialization and service launch, field test is one of the essential user centric processes that User Equipment (UE) vendors should go through
16-Jul-2021 | AN-No. 1SL369
Applications
Real-time filter tuning flow
SynMatrix advanced computer-aided tuning enables real time filter optimization in an easy guided process using the network analyzers from Rohde & Schwarz.
02-May-2024
Applications
High-Resolution Measurements with Rohde & Schwarz Oscilloscopes
With the RTO-K17/RTE-K17 High Definition Option the user will see more signal details with up to 16 bit vertical resolution.
13-Apr-2015 | AN-No. 1TD06
Applications
Identifying defective single elements in antenna arrays
Fault identification in single elements of antenna arrays is possible by scanning in near-field range and applying the near-field to far-field transformation method.
24-Mar-2020
Applications
Noise Figure Measurements on Amplifiers in Pulsed Mode
Noise Figure Measurements on Amplifiers in Pulsed Mode
19-Dec-2000 | AN-No. 1MA32
Applications
Time Synchronous Signals with Multiple R&S®SMBV100A Vector Signal Generators
This application note explains how to synchronize multiple R&S®SMBV100A vector signal generators.
09-Jul-2013 | AN-No. 1GP84
Applications
NB-IoT field-tolab testing with R&S®CMWcards
NB-IoT field-tolab testing with R&S®CMWcards
19-Feb-2019
Applications
Easy testing of interferometric direction finders
The R&S®RF Ports Alignment Software together with the R&S®SMW-K545 option provides a standard and tailored solution for calibrating and aligning the amplitude, group delay and phase between the RF ports of multiple coupled dual-path or single-path R&S®SMW200A vector signal generators.
08-Jul-2022
Applications
Generation of Radar Signals in a Hardware in the Loop (HIL) Environment
This application note provides insights into generating radar signals for hardware-in-the-loop testing with the R&S®SMW200A. Including an introduction to HIL testing and realtime o
22-Jan-2021 | AN-No. 1GP124
Applications
DOCSIS 3.1 BER testing on CATV amplifiers with R&S®CLGD and R&S®FSW
DOCSIS 3.1 BER testing on CATV amplifiers with R&S ® CLGD and R&S ® FSW
06-Dec-2016
Applications
Creating Test Scenarios in Accordance with IEC 62002 Ed. 2.0 (MBRAI) Using the R&S®SFU
Creating Test Scenarios in Accordance with IEC 62002 Ed. 2.0 (MBRAI) Using the R&S SFU
28-Nov-2007 | AN-No. 7BM61
Applications
Method of Implementation (MOI) USB Type-C to Legacy Cable Assembly Compliance Tests
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB Type-C to legacy cable assemblies supporting USB3.1 Gen2, USB3.1 Gen1, and USB2.0. Based on 5 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.
18-Jan-2024 | AN-No. 1SL406
Applications