To compensate for this effect, the R&S®AFQ100A is equipped with an equalizer that linearizes the entire frequency response in realtime.The R&S®AFQ100A combines flexibility with outstanding signal quality.

For further information please refer to "www.rohde-schwarz.com/royalty-free-products".35 MBV 4.0 13.12.2018 R&S®SMx RF and Baseband Correction Toolkit Software for equalizing I/Q imbalance and RF frequency response of generator setups consiting of a R&S®AFQ100A / R&S®AFQ100B and a R&S®SMU200A / R&S®SMJ100A / R&S®SMATE100A / R&S®SMBV100A / R&S®SGS100A.

R&S ®AFQ100A is abbreviated as R&S AFQ100A Release Notes PAD-T-M: 3574.3288.02/02.00/CI/1/EN/ Test and Measurement R&S AFQ100A Table of Contents Release Notes 1176.9129.42 - 01 2 Table of Contents 1 Information on the Current Version and History .............................. 3 1.1 Version 3.50.201.17 ................................ ................................ ................................

Rohde & Schwarz offers different analog and digital signal generators: from RF vector signal generators, baseband signal generators, microwave signal generators.

Current revision of instrument driver supports these instruments and firmware versions: Instrument Supported Firmware Remarks AFQ100A 2.09 AFQ100B 2.09 Getting Started Rohde & Schwarz 4 3 Getting Started This instrument driver is a dll-based LabVIEW driver.

Chinese (PD 5213.6541.15)

Describes all instrument functions and remote control commands, as well as measurement and programming examples.

Provides information on security issues when working with R&S®AFQ100A in secure areas.

Provides the information required to prepare the instrument for use and start working.Basic operations and handling are described.

This application note describes how to use the Rohde & Schwarz software tool ‘RsBatchConvert.exe’ for the conversion of binary data or WinIQSIM generated AMIQ waveforms into the new waveform format. The tool not only rescales I/Q data contained in the file but also changes the K-option requirement from WinIQSIM Kxx to the new WinIQSIM2 K2xx options. Thus, new instruments with installed K2xx options may be used to continue using existing waveform files.

18-Jun-2009 | AN-No. 1GP64

This Application Note presents means to integrate R&S Test and Measurement instruments into the Agilent® ADS® Design System. Methods to include R&S Instruments are presented, accompanied by a free-of-charge software solution which is provided with this application note. It makes it very easy to include R&S Instruments into your ADS environment and your design flow. Versions for both WINDOWS XP® and LINUX® operating systems are available.

04-Aug-2012 | AN-No. 1MA72

Describes the specific functions of the application. Information required to install and prepare the software for use and start working, as well as the remote connection to Rohde&Schwarz instruments are described.The application is supported by the following products:R&S®SMBV100A, R&S®SMU200A, R&S®SMATE200A, R&S®SMJ100A, R&S®AMU200A and the I/Q modulation generators R&S®AFQ100A and R&S®AFQ100B.For information on operating the product see the corresponding user manual.

This application note describes how to connect R&S® test and measurement products quickly and seamlessly to AWR® Visual System Simulator™ (VSS) via a GPIB or LAN interface. Using AWR® Connected™ customized for Rohde & Schwarz hardware and R&S® WinIQSIM2™ signal simulation software, the flexibility of digital radio standards is highlighted and its integration into VSS is demonstrated.

20-May-2010 | AN-No. 1MA174

The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.

20-Dec-2012 | AN-No. 1MA035

R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications. R&S®VISA also includes a trace tool that simultaneously monitors communications between multiple applications and T&M instruments, and permits targeted analysis with the aid of efficient filters.

26-May-2020 | AN-No. 1DC02

The ARB Toolbox is an easy-to-use, feature packed software package that is used for many ARB waveform related tasks. Use this software for creating ARB waveform files from custom IQ data; import data from MATLAB .mat files; evaluate waveform content graphically; resample or filter waveforms; create analog modulated signals as ARB files; edit marker data in waveform files; use the composer for the creation of complex multi carrier scanarios.

13-Dec-2018 | AN-No. 1GP88

DVB-T Bursted Noise is a tool for generation of DVB-T compatible noise signals. The IQ data can tranferred to WinIQSIM™ / WinIQSIM2™ for further processing and transmission to an AMU, AFQ, AMIQ, SMU, SMIQ.

08-Jul-2009 | AN-No. 1MA51

Rohde & Schwarz signal generators can generate standard-compliant WLAN IEEE 802.11ac signals up to 160 MHz bandwidth with excellent EVM performance. This application note demonstrates the generator test solutions and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.

26-Apr-2013 | AN-No. 1GP94

The fact that cable TV networks are generally located in densely populated areas or extend over large geographical regions makes the presence of line extenders at regular intervals a necessity. Cascading large numbers of amplifiers however calls for excellent noise, SWR and intermodulation distortion specifications for the integrated amplifiers in order to avoid quality of service dropping below minimum acceptable levels. Composite second order, composite triple beat & cross modulation are commonly used figures to specify the performance of CATV equipment. In this application note we describe how to determine these figures with the aid of R&S SMU200A or AFQ100A and SMV vector signal generators.

11-Aug-2006 | AN-No. RAC-0605-016

The aim of this application note is to provide information regarding Rohde & Schwarz instrument drivers. This paper shall help application engineers and software developers to easily get an understanding of advanced techniques to develop test and measurement (T&M) applications by utilizing Rohde & Schwarz instrument drivers. Furthermore the nomenclature used for Rohde & Schwarz instrument drivers will be explained.

01-Jan-2013 | AN-No. 1MA153

This application note outlines two different approaches for remote-controlling Rohde & Schwarz instruments out of MathWorks MATLAB: The first one uses VISA connection and direct SCPI commands. The second approach takes advantage of Rohde & Schwarz VXI plug&play instrument drivers and MATLAB Instrument Control Toolbox.

12-Jun-2017 | AN-No. 1MA171

GDE (= Generic Demonstration Engine) is a easy-to-use, free-of-charge remote control command sequencer tool. The big advantage is that the test description is stored in a simple, easy-to-read text file, and loaded in GDE at runtime. This makes it very easy to modify tests by the user or add additional tests to already existing test solutions without redistributing big setup files.

15-Dec-2008 | AN-No. 1MA83

The foregoing application note is intended for everyone who desires to become more familiar with the use and upload of custom data in ARB, digital modulation and RF list mode. Particularly, this note describes the instruments R&S® SMW200A, R&S® SGT100A, R&S® SMBV100A, R&S® SMU200A, R&S® SMJ100A and R&S® SMATE200A and provides an overview of already available solutions as well as it gives hints for the writing of own applications. Please also see the application note 1GP88 for the ARB Toolbox software and the application note 1GP96 for the CDM-Toolbox software.

22-Dec-2010 | AN-No. 1GP62

Operation Hours and Power-on event counters at delivery of new singal generators

Describes the specific functions of the application, including the remote control commands with programming examples.For information on operating the product see the corresponding user manual.The R&S®SMBV100A Operating Manual (online version) contains the documentation of the base units and all options for immediate display (no download required).

User manuals collection of all options supported by the signal generation software R&S®WinIQSIM2TM.Each manual describes the specific functions of the applications, including the remote control commands with programming examples.The R&S®WinIQSIM2TM User Manual (online version) contains the documentation of the software and all options for immediate display (no download required).Tip: Click on the title of this page for an overview on the related user manuals of the digital standards that apply to the signal generation software.

Describes the specific functions of the application, including the remote control commands with programming examples.The application is supported by the following products:R&S®AFQ100A, R&S®AFQ100B and R&S®WinIQSIM2TM.For information on operating the product, see the corresponding user manual.

The R&S®WinIQSIM2™ simulation software has been especially developed for easily generating digitally modulated signals. The graphical user interface allows intuitive operation, supported by context-sensitive help. By offering a convenient way to create any standard-conforming waveform with all the included standards and to generate multicarrier signals as well as multisegment waveforms, R&S®WinIQSIM2™ is suitable for a wide range of applications.

English (PD 5214.0799.12)

English (PD 5214.0799.22)