R&S®UDS Digital multimeter

See more

Simultaneous display of three measurements

Depending on the selected measurement function, users can display multiple measured values.

• The primary measurement value is main.
• A secondary measurement value can be activated or deactivated with the soft menu key. When activated, the secondary measurement value is displayed above the primary measurement value.
• The statistical functions are displayed below the primary measurement value.

Limit testing 

Minimum and maximum analysis

The R&S®UDS digital multimeters have programmable test functions, including max./min. limits on/off. The display color changes to indicate limit violations: red for out-oflimit values and green for within-limit values. An error tone can be toggled on/off with the beeper soft menu key and sounds when limits are violated.

Resistance measurement

Two- and four-wire measurements

The R&S®UDS digital multimeters support both two-wire and four-wire measurements. They feature four front panel sockets: Com, V, Lo and Hi. For two-wire measurements, only the Com and V sockets are required. Four-wire measurements also require Lo and Hi sockets (Sense).

Data logging

Record all measured values

The data can be saved on an external USB flash drive or transferred to an
external PC with a USB or LAN connection. The data rate of up to 10 sample/s means the measured values are available every 100 ms.

Measurement versatility

Different measurement and mathematic functions

• Up to 12 measurement functions: DCV, DCI, true RMS, ACV and ACI, frequency, two-wire and four-wire resistance, capacitance, continuity test, diode test, temperature, power.
• Mathematic functions: limit testing, min./max., average, offset, DC power, dB, dBm