R&S®ScopeSync Oscilloscope Software

Oscilloscope synchronization software for MXO4, MXO5 and MXO5C

 

R&S®ScopeSync Oscilloscope Software
R&S®ScopeSync Oscilloscope Software
R&S®ScopeSync Oscilloscope Software
Show me more details

Key facts

  • Get R&S®ScopeSync as a standard feature with MXO4, MXO5 and MXO5C oscilloscopes 
  • Synchronize multiple oscilloscopes and up to 24 channels
  • Set any combination of MXO4, MXO5 or MXO5C as your primary or secondary scope. The scopes may have different bandwidths, sample rate, memory depth and channel count
  • Use measurements, math and applications, such as protocol decode on all 24 channels
  • Using the PC-based application R&S®ScopeStudio, import up to 32 synchronized channels
Get a Quote

R&S®ScopeSync synchronization of two oscilloscopes
 

  • Quickly synchronize two oscilloscopes for measurements up to 16 channels. There is no special equipment needed, just three simple physical connections and the two oscilloscopes are ready.
  • Connect LAN either directly between the oscilloscopes or both to a switch or both to a network.
  • Connect two BNC cables: connect the Trig out/in signal and connect both oscilloscopes to the same 10 MHz timebase clock to ensure accuracy.
Now, your R&S®ScopeSync physical connection is ready.

Features & benefits

Easily setup directly on the oscilloscope

Using the R&S®ScopeSync menu, enter the IP address of the secondary oscilloscope (see O2 Scope 2 in the user interface).

Show me more details

Align trigger with automatic deskew

R&S®ScopeSync automatically aligns both oscilloscope triggers to the same point in time. An auto-deskew feature measures the trigger out delay between two MXO oscilloscopes and uses this value to align trigger points. Simply connect the passive probes delivered with the oscilloscopes from channel 1 of both oscilloscopes to the same probe compensation signal and the oscilloscope will make the calculation for you.

Show me more details

Leverage all analysis capabilities on your oscilloscope

With all acquired signals in a single oscilloscope, use measurements, math and applications, such as protocol decode, choosing any of the oscilloscope channels as source.

Show me more details

Synchronize up to 24 channels

Connect several scopes (up to 10) and synchronize up to 24 channels with R&S®ScopeSync. Use a power splitter to divide the Trig out and 10 MHz Ref out signals from the primary oscilloscope to the secondary oscilloscopes.

Show me more details

Related products

R&S®MXO4 oscilloscope, front view

R&S®MXO 4
R&S®MXO 5 oscilloscope, front low

R&S®MXO 5
R&S®MXO 5C oscilloscope, front low

R&S®MXO 5C

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.
For service/support requests, please go here to log in or register.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.