Key facts
The R&S®B1 MSO option turns Rohde & Schwarz oscilloscopes into fast, precise and easy-to-use mixed signal oscilloscopes (MSO). Mixed signal oscilloscopes are hybrid test instruments that combine the digital oscilloscope measurement capabilities with logic analyzer capabilities.
More signal details thanks to high time resolution across the entire memory depth
The R&S®B1 option for the R&S®RTO, R&S®RTE and R&S®RTM oscilloscopes has a sampling rate of 5 Gsample/s and maximum time resolution of 200 ps for the digital channels. This sampling rate is available across the entire memory depth. As a result, the MSO option can even detect critical events such as narrow, widely separated glitches.
The digital channels of the R&S®RTO oscilloscope operate with 200 ps resolution and can detect short glitches.
The digital channel resolution of 200 ps makes these channels a precise trigger source. The R&S®B1 has numerous trigger types for debugging and analysis, such as edge, width, pattern and serial pattern. These triggers can be combined with holdoff conditions. The user can select individual digital channels, bus signals or any logical combination of digital channels by applying logic operations such as AND, OR and XOR for the trigger source.
Select from a comprehensive list of trigger types for the digital channels.
High acquisition and analysis rate for fast fault finding
Hardware based signal processing of measured digital waveforms covers acquisition, triggering and analysis functions such as cursor functions and measurements, and even includes the visualization of the results. Parallel processing of all measured digital signals allows an acquisition and analysis rate of max. 200 000 waveforms per second with the R&S®RTO and R&S®RTE oscilloscopes, ensuring that rare events are detected quickly and reliably.
The R&S®SmartGrid function helps R&S®RTO and R&S®RTE oscilloscopes place digital channels on the screen. The digital channel activity remains visible in the signal icons regardless of the acquisition state. The binary signals from the individual digital channels obtained between two screen dumps are superimposed on the measurement diagram. An overview of the binary state and the edge transition frequencies are displayed.
Use the R&S®SmartGrid function to position the digital channels on the display according to your needs.
To efficiently analyze measured waveforms, all Rohde & Schwarz oscilloscopes offer the R&S®B1 option with a range of automatic time measurements, including statistical evaluation. Automatic measurements can be performed on all digital channels and their logical combinations. The cursor also supports the decoding of the bus value at the cursor position. The history view function allows you to access measurement waveforms in the acquisition memory and apply analysis functions to them.
Detailed analysis on the digital channels.
Serial protocol analysis, even with digital channels
The protocols of serial interfaces such as I²C, SPI, UART/RS-232, CAN, LIN and FlexRay™ can also be triggered and decoded with the R&S®RTO-B1 digital channels and the appropriate serial protocol options.
Protocol decoding such as I²C decoding is also supported on digital channels.
Low test point loading due to active probe solution
The digital inputs are grouped into logic probes with eight channels. High input impedance combined with low input capacitance of 100 kΩ || 4 pF ensures high signal fidelity and low test point loading.
Low test point loading with active probe solution
Related products
