mmWave measurements: The R&S®ZVA-Zxxx and R&S®ZCxxx mmWave converters extend the R&S®ZNA vector network analyzer frequency range up to 1.1 THz.

27-Feb-2025

WCDMA / CDMA2000 Intermodulation Calibration for Zero IF Chipsets

16-Dec-2004 | AN-No. 1CM54

Radar technology is essential for state-of-the art and future vehicles on the path to full autonomous driving. Radar sensors deliver critical information about the surrounding traffic environment or monitor the interior of the vehicle. As safety-relevant parts, radar sensors must adhere to specifications and regulations.

12-Dec-2022

Measurements on Hearing Aids with the Audio Analyzers UPL and UPD

04-Jun-1998 | AN-No. 1GA34

PESQ^® Measurement for GSM with R&S^®CMUgo

05-Jan-2012 | AN-No. 1MA119

Crucial for proper operation of mobile networks. Part 4 of the series on Cable and Antenna verification

Learn how systematic testing of filter combiners and RF components ensures standards conformance, detecting defects for optimal base station performance

09-Jan-2025 | AN-No. 8NT20

This application note provides information how to perform noise figure measurements under pulsed or bursted conditions with spectrum analyzers and noise sources.

28-Jun-2018 | AN-No. 1EF103

The purpose of this document is to provide a step-by-step guidance on how to perform VESA compliance testing on DisplayPort 8k cable assembly.Throughout this Method of Implementation (MOI), procedures will detail how to perform such VESA compliance testing using the R&S® ZNB lineup of Network Analyzers.

19-May-2025 | AN-No. 1SL412

Verify the energy efficiency of your O-RAN radio units

19-Mar-2024

Millimeter-Wave Measurements Using Converters of the R&S^® ZVA Family

09-Oct-2007 | AN-No. 1EZ55

Correlated time-frequency measurements help optimize gate driving and minimize electromagnetic emissions early on during development.

27-Apr-2023

Two R&S ETL TV analyzers or two R&S ETC compact TV analyzers are used to measure the receive level of a car antenna against that of a reference antenna. The R&S BCDRIVE broadcast drive test software exports measured data for display in Google Earth.

19-Feb-2015

Measurement Setup for Phase Noise Test at Frequencies above 50 GHz with two external harmonic mixers in combination with a commercially available phase noise tester. Signal sources with frequencies up to 325 GHz can theoretically be measured with this setup.

05-Feb-2018 | AN-No. 1EF101

ACP Measurement according to IS 54 (NADC) using the FSE Spectrum Analyzers

17-Jan-2002 | AN-No. 1EF32

Battery simulation tool for R&S®NGM200/NGU201 power supplies

02-May-2023

The R&S®NGU401 source measurement unit (SMU) is ideal to perform reverse polarity tests which are specified as part of ISO 16750‑2, plus it provides automated testing capability.

23-May-2022

Simple testing of multi-frequency, multi-constellation GNSS receivers

22-Aug-2019

I/V semiconductor characteristic curves with Rohde & Schwarz sweep tool

02-May-2023

This application note employs preliminary theoretical analysis and demonstrates how the problems of indevice coexistence can be measured.

28-Apr-2015 | AN-No. 1MA255

Direct remote control of OSP via VNA and SA

06-Dec-2013 | AN-No. 1MA226

Remote Emulation with the R&S^®SMBV100A Vector Signal Generator

11-Oct-2016 | AN-No. 1GP91

The R&S®RTx-K36 frequency response analysis (Bode plot) option displays the system response to changes in operating conditions, such as supply voltage changes.

13-Aug-2024

VoIP for air traffic control

21-Nov-2014

Generating and Analyzing 3 GPP Multicarrier Signals with High Dynamic Range

17-Feb-2005 | AN-No. 1MA48

Importing Data in ARB, Custom Digital Modulation and RF List Mode

22-Dec-2010 | AN-No. 1GP62

This application note reviews a new calibration subsystem which consists of Inline Calibration Units (ICUs). These ICUs are designed for in situ use, so they are left in place both during the calibration procedure and during the measurement of the Device Under Test (DUT).This adds versatility, convenience and accuracy to the VNA based measurement system, as it means the calibration can be refreshed at any time without manually disconnecting the DUT from the test system.

29-Sep-2017 | AN-No. 1EZ71

This app note provides an introduction into the various jitter components and elucidates the commonly available jitter separation frameworks.

08-Dec-2021 | AN-No. 1SL375

The document focusses on devices for the 3.5 GHz NR (5G New Radio) candidate band, but its findings are equally applicable to developments and measurements for K-band satellite applications or mmW NR candidate bands,

01-Aug-2017 | AN-No. 1MA289

This application note shows how to measure shielding effectiveness using the R&S®EMC32-K48 option via R&S®EMC32 Measurement Software.

01-Dec-2015 | AN-No. 1SP19

RF signal monitoring in DVB-T2 multi-PLP networks

24-Jul-2012