Login or register to gain full access to the Knowledge+ platform!
I want to create an account
I already have an account
Scenario based testing of C-V2X applications in lab and field environments
Explainer video: Implementing realistic tests on virtual roads
Learn about the fundamental measurements required to analyse and verify radar signals, the range of test tools available and when to use them.
Testing and debugging automotive domain controllers / high performance CPUs on their in-vehicle network interfaces, their performance and interoperability.
V2X is currently a hot topic across the globe, involving technologies such as 802.11p and LTE. This webinar will take a look at the market requirements and the ...
Automotive radar test solutions using high-performance oscilloscopes - learn details about analyzing pulses and chirps with oscilloscopes.
Sign up for our free webinar “Comprehensive radar integration testing”
Learn about the next generation of automotive radar test systems with the most accurate, scalable & advanced solution for automotive radar object simulation ...
In this webinar you will learn more about the newest generation of the Rohde & Schwarz CATR reflector chamber that can overcome test measurement challenges.
Watch this free Rohde & Schwarz webinar and learn more about eCall and its challenges. Leading the way to the next generation eCall system.
In this webinar you will learn how to test C-V2X devices in a lab setting and see required test instrumentation in action.
In this webinar you will learn more about the basics of 5G network topologies and its challenges for RF and protocol stack testing.
In this webinar your will learn more about an over-the-air (OTA) test concept and its challenges and solutions.
Watch this webinar and get insight into technical and market trends in automotive E/E manufacturing testing as well as different test methods ICT, BS / JTAG, FCT.
Automotive 5G voice quality testing from Rohde & Schwarz and HEAD acoustics
With the ability to generate reference targets (with an R&S®AREG800A) with minimum reflections, and the highest measurement accuracy, all in a very small ...
A video about automotive radar object simulation with focus on the radar test system from Rohde & Schwarz.
Get an overview of the topic of OTA Full Vehicle Antenna Testing in this short video and discover how test system design can deliver accurate characterization of ...
Testing of a 1000BASE-T1 in-line connector using the ZNB-K220 In-Situ De-embedding based on the OA TC9 test specification for STP
The plastic parts in front of the radar can have a huge influence on the radar performance. This video demonstrates the ease of radome and bumper analysis using ...
The antenna patterns of automotive radars provide a wealth of information that is of vital importance during radar development and validation.
This application note describes how to detect even small fails in dynamic turn indicators with R&S®AdVISE.
Learn more about efficient testing of electronic control units in automotive applications to ensure a convenient and safe driving experience.
The R&S®NGL200 and R&S®NGM200 can simulate battery cells when testing battery management systems and replace far more expensive dedicated battery ...
Test, calibrate and verify automotive radar sensors with the R&S®ATS1500C antenna test system and the R&S®AREG100A radar echo generator.
The R&S®SMBV100B GNSS simulator and the AVL DRIVINGCUBE™ toolchain create new possibilities for driver assistance systems and autonomous driving.
The R&S®SMBV100B delivers precise synchronization information for communications in C-V2X mode and very accurate position information to the device under test.
This application note focuses on how to measure and analyze FMCW radar signals with up to 6 GHz bandwidth with an R&S® RTP oscilloscope.
Use the R&S®QAR to optimize your production process and verify the mounting position of radar sensors quickly and reliably.
The QAR provides information about the RF characteristics of the bumper material at the push of a button and enables users to optimize material characteristics.
This application note is a systematic guide to help test engineers configure the Vector Network Analyzer in order to perform compliance test on Automotive ...
