Login or register to gain full access to the Knowledge+ platform!
I want to create an account
I already have an account
The R&S® IQ File Cutter Application can load IQ data from supported IQ file formats and export part of the signal to another file.
Learn more about aerial measurement systems in real implementations.
Capturing 5G signals in TDD network for spectrum analysis measurements can be quite challenging. Advanced gated trigger (FPH-K57) is useful for such measurement ...
With R&S®Spectrum Rider FPH or R&S®Cable Rider ZPH gated trigger feature, it is possible to mask out the downlink signal and focus on the uplink ...
This application note shows how to measure the phase accurately between several signals using vector network analyzers of the R&S®ZNA, R&S®ZNB and ...
This application note provides information on how to perform spectral emission measurements on pulsed signals with spectrum analyzers using RBW filters.
The document gives an overview and user guide about a link budget calculator for the main components of a basic OTA system. Accomopanied by an Excel sheet ...
This document describes how the R&S®ETL TV analyzer, performs all required DVB-T2 transmitter measurements, from the initial acceptance testing for the ...
This application note provides basic information about frequency and phase settling time measurements and how the measurement is implemented inside modern phase ...
This application note is for readers that work with digital radio transmitting and receiving devices or maintain analog radio communication equipment.
Measure and analyze signals with the R&S®FSW Signal and Spectrum Analyzer platform in collaboration with an R&S®RTO Digital Oscilloscope.
The instrument setup provided in this application note allows to analyze a degraded speech signal stored into a wave file and to display its FFT spectrum and ...
This application note focuses on fully automated, fast and accurate measurements, of linear FMCW radar signals. It explains the basic signal processing, the ...
This application note explains how to convert different Rohde&Schwarz I/Q file formats among each other using the supplied software tool.
In this application note we explain how to test FPGA-based hardware emulators using Rohde & Schwarz vector signal generators for creating suitable real-time ...
