R&S®ZNH handheld vector network analyzer

Low in complexity, high in precision

R&S®ZNH handheld vector network analyzer
Open Lightbox
R&S®ZNH handheld vector network analyzer
Open Lightbox
R&S®ZNH handheld vector network analyzer
Open Lightbox
R&S®ZNH handheld vector network analyzer
Open Lightbox
R&S®ZNH handheld vector network analyzer
Open Lightbox
R&S®ZNH handheld vector network analyzer
Open Lightbox
R&S®ZNH handheld vector network analyzer
Open Lightbox
R&S®ZNH handheld vector network analyzer
Open Lightbox
R&S®ZNH handheld vector network analyzer
Open Lightbox
R&S®ZNH handheld vector network analyzer
Open Lightbox
R&S®ZNH handheld vector network analyzer, Front view R&S®ZNH handheld vector network analyzer, Side view R&S®ZNH handheld vector network analyzer, Back view R&S®ZNH handheld vector network analyzer, Hero view R&S®ZNH handheld vector network analyzer, Application Image R&S®ZNH handheld vector network analyzer, Application Image R&S®ZNH handheld vector network analyzer, Application Image R&S®ZNH handheld vector network analyzer, Application Image R&S®ZNH handheld vector network analyzer, Side view R&S®ZNH handheld vector network analyzer, Application Image

Key facts

  • Frequency range from 30 kHz to 4/8/18/26.5 GHz
  • One-port cable and antenna measurement with basic instrument
  • S-parameter (S11, S12, S21, S22) measurement with basic instrument
  • 100 dB (typ.) dynamic range for filter and antenna isolation measurements
  • Non-reflective display, small form factor, ruggedized housing (IP51)

Starting at EUR 11,000

  • 3 year warranty extension

Lightweight design, heavyweight performance

R&S®ZNH is a full two-port handheld vector network analyzer that offers one-port cable and antenna measurement and full two-port S-parameter measurements. The touch based interface is simple to operate and a configuration overview menu makes measurement preparation more efficient. The R&S®ZNH may have a small form factor but it is complete in every detail and delivers high performance and all the key functionalities.

Features & benefits

Four receiver architecture

Sophisticated RF architecture provides access to latest calibration types

The four-receiver architecture consists of dedicated reference receivers and test receivers at both port 1 and port 2. This allows R&S®ZNH to support more advanced calibration types such as unknown through, open, short and match (UOSM) calibration. This calibration is useful for DUTs with different input or output connector types at the test ports.

Four-receiver architecture
Open Lightbox

Four-receiver architecture

Minimal switching between the two ports and sophisticated calibration such as UOSM

Compact powerhouse

Outstanding RF performance in a small form factor

The portability and small footprint of the R&S®ZNH make it ideal for field measurements.

The R&S®ZNH also delivers high performance with the following features:

  • Wide frequency range of 30 kHz to 4/8/18/26.5 GHz to support a wide range of applications
  • High dynamic range of up to 100 dB (typ.) to measure large level variations
  • Highly accurate thanks to a low trace noise magnitude (RMS) of 0.0015 dB to 0.0040 dB (typ.) and a low trace noise phase (RMS) of 0.02° to 0.04° (typ.)
  • Built-in receiver step attenuator at both ports, which is adjustable in 5 dB steps from 0 dB to 15 dB

Receiver step attenuator
Open Lightbox

Receiver step attenuator

Increases the linearity of the port input power range, which protects the analyzer against overloading.

Simple to operate

Multi-touch screen, remote control and measurement wizard for a top user experience

The multi-touch screen offers the standard pinch-to-zoom function available on smartphones. The R&S®ZNH supports typical phone control gestures, helping users feel at home. Even if operators cannot access the instrument directly, free PC, Android and iOS remote control apps are available for seamless operation. Furthermore, the measurement wizard helps simplify measurements with automated test sequences, speeding up the test process and reducing the potential for human error.

Multi-touch function
Open Lightbox

Multi-touch function

Capacitive touchscreen; intuitive operation and no display calibration required.

Simple configuration

Simple and fast setup with configuration overview menu

The R&S®ZNH has both keys and a rotary knob as well as touchscreen controls. The keys are large and well spaced out, allowing easy operation when wearing gloves.

The capacitive touchscreen offers a new kind of user experience:

  • Directly interact with elements on the screen
  • Access menus quickly
  • Change frequency and span
  • Add/move/delete markers
  • And more
The configuration overview menu reduces the steps required to configure the measurement settings, enabling fast setup.

Flexible calibration
Open Lightbox

Flexible calibration

User defined calibration sequences provide a flexible approach.

Simple to add value

Comprehensive standard features and simple option ordering

The R&S®ZNH basic unit includes:

  • Distance-to-fault measurements
  • One-port cable loss measurements
  • Reflection measurement
  • Transmission measurement
  • Four S-parameters (S11, S12, S21, S22)
When additional functions are needed, the options are easy to order. All the options can be ordered transparently and independently, meaning no hidden costs and no confusion when ordering.

Quick setup of S-parameter display in desired format.
Open Lightbox

Quick setup of S-parameter display in desired format.

Four S-parameter measurements provided as standard.

Available models

Available models
Models
Ports
Frequency
Connectors
Starting at

R&S®ZNH4

Order number 1321.1611.04

Ports
2
Frequency
4 GHz
Connectors
N
Starting at

R&S®ZNH8

Order number 1321.1611.08

Ports
2
Frequency
8 GHz
Connectors
N
Starting at

R&S®ZNH18

Order number 1321.1611.18

Ports
2
Frequency
18 GHz
Connectors
N
Starting at

R&S®ZNH26

Order number 1321.1611.26

Ports
2
Frequency
26.5 GHz
Connectors
PC 3.5mm
Starting at

Available options

General analysis
Product
Description
R&S®ZNH-K9

Order number 1334.6800.02

Description

  Power sensor support

R&S®ZNH-K10

Order number 1334.6846.02

Description

DC bias variable voltage source

R&S®ZNH-K29

Order number 1334.6823.02

Description

Pulse measurements with power sensor

R&S®ZNH-K45

Order number 1334.6852.02

Description

Vector voltmeter

R&S®ZNH-K47

Order number 1334.6875.02

Description

Mixed mode S-parameters

R&S®ZNH-K66

Order number 1334.6869.02

Description

Wave ratios wave quantities

R&S®ZNH-K68

Order number 1334.6881.02

Description

Time domain analysis

R&S®ZNH-K69

Order number 1334.6830.02

Description

Power sensor measurement vs frequency

Calibrations kits
Product
Description

Order number 0800.8515.52

Description

Calibration Kit, 0 Hz to 3 GHz, N, 50 Ω

Order number 0800.8515.72

Description

Calibration Kit, 0 Hz to 3 GHz, N, 75 Ω

R&S®FSH-Z28

Order number 1300.7810.03

Description

Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement

DC to 8 GHz for R&S®FSH

R&S®FSH-Z29

Order number 1300.7510.03

Description

Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement

DC to 3.6 GHz forR&S®FSH4/R&S®FSH8

Calibration units
Product
Description
R&S®ZN-Z103

Order number 1321.1828.02

Description

Calibration unit, 1 port, N (f), 2 MHz to 4 GHz

R&S®ZN-Z103

Order number 1321.1828.12

Description

Calibration unit, 1 port, N (f), 1 MHz to 6 GHz

Order number 1328.8163.02

Description

Calibration kit, 50 Ohm, N (male), 0 Hz to 18 GHz

Order number 1328.8163.03

Description

Calibration kit, 50 Ohm, N (female), 0 Hz to 18 GHz

Order number 1328.8157.02

Description

Calibration kit, 50 Ohm, 3.5mm (male), 0 Hz to 26.5 GHz

Order number 1328.8157.03

Description

Calibration kit, 50 Ohm, 3.5mm (male), 0 Hz to 26.5 GHz

Test cables
Product
Description

Order number 1301.7595.25

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 635 mm (25 in)

Order number 1301.7595.38

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 965 mm (38 in)

Order number 1301.7608.25

Description

Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 635 mm (25 in)

Order number 1301.7608.38

Description

Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 965 mm (38 in)

Order number 1306.4507.24

Description

Test port cable, 0 Hz to 18 GHz, N (m) - N (m), length 610 mm (24 in)

Order number 1306.4507.36

Description

  Test port cable, 0 Hz to 18 GHz, N (m) - N (m), length 914 mm (36 in)

Order number 1306.4513.24

Description

Test port cable, 0 Hz to 18 GHz, N (m) - 3.5 mm (m), length 610 mm (24 in)

Order number 1306.4513.36

Description

Test port cable, 0 Hz to 18 GHz, N (m) - 3.5 mm (m), length 914 mm (36 in)

Order number 1306.4520.24

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 610 mm (24 in)

Order number 1306.4520.36

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 914 mm (36 in)

Order number 1306.4520.60

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 1524 mm (60 in)

Order number 1306.4536.24

Description

Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 610 mm (24 in)

Order number 1306.4536.36

Description

Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) - 2.92 mm (m), length 914 mm (36 in)

Recommended extras
Product
Description
R&S®FSH-Z320

Order number 1309.6600.00

Description

RF cable (length: 1 m), DC to 8 GHz, armored, N male/N female connectors

for R&S®FSH-K41 option

R&S®FSH-Z321

Order number 1309.6617.00

Description

RF cable (length: 3 m), DC to 8 GHz, armored, N male/N female connectors

for R&S®FSH-K41 option

R&S®RDL50

Order number 1035.1700.52

Description

High-Power Attenuator, 50W

0 Hz to 6 GHz, 20 dB

R&S®RBU100

Order number 1073.8495.20

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Order number 1073.8495.30

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®HA-Z340

Order number 1321.1392.02

Description

GPS Receiver for R&S®Spectrum Rider

R&S®RAM

Order number 0358.5414.02

Description

Matching pad, 75 Ω, L section

bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section

R&S®RAZ

Order number 0358.5714.02

Description

Matching pad, 75 Ω, series resistor 25 Ω

0 Hz to 2.7 GHz

R&S®FSH-Z38

Order number 1300.7740.02

Description

Matching pad 50/75 Ω, L section, N to BNC

bidirectional, 0 Hz to 1 GHz, BNC female/N male connectors, load capacity 1 W

R&S®Adapter BNC N

Order number 0118.2812.00

Description

N - BNC Adapter (N male - BNC female)

R&S®Adapter N

Order number 0092.6581.00

Description

N - Adapter (N male - N male)

R&S®Adapter SMA N

Order number 4012.5837.00

Description

N- Adapter (N male - SMA female)

R&S®Adapter N1 6 F

Order number 3530.6646.00

Description

N - Adapter (N male - 7/16 female)

R&S®Adapter N 16 M

Order number 3530.6630.00

Description

N - Adapter (N male - 7/16 male)

R&S®Adapter N FME F

Order number 4048.9790.00

Description

N - Adapter (N male - FME female)

R&S®Adapter BNC M

Order number 0017.6742.00

Description

N - BNC Adapter (BNC male - banana female)

R&S®HA-Z303

Order number 1321.1328.02

Description

External battery charger

Charges batteries outside of the instrument

R&S®HA-Z306

Order number 1321.1334.02

Description

Battery pack

Lithium-ion battery with discharge indicator, 6.4 Ah

R&S®HA-Z301

Order number 1321.1386.02

Description

Spare power supply, incl. mains plug for EU, UK, US, AUS, CH

R&S®HA-Z302

Order number 1321.1340.02

Description

Vehicle adapter 

Powers the instrument and the R&S®HA-Z303 external battery charger

R&S®HA-Z322

Order number 1321.1370.02

Description

Carrying holster

R&S®HA-Z322

Order number 1321.1370.03

Description

Rainproof carrying holster

R&S®HA-Z220

Order number 1309.6175.00

Description

Carrying bag

R&S®HA-Z321

Order number 1321.1357.02

Description

Hard Case for R&S®Spectrum Rider

R&S®RTH-Z4

Order number 1326.2774.02

Description

Hard shell protective carrying case

Dimensions: 455 mm x 368 mm x 166 mm. Weight: 2.5 kg.

R&S®HA-Z211

Order number 1309.6169.00

Description

Spare USB cable

R&S®HA-Z210

Order number 1309.6152.00

Description

Spare LAN cable

Power sensors
Product
Description
R&S®FSH-Z14

Order number 1120.6001.02

Description

Directional power sensor

25 MHz to 1 GHz

R&S®FSH-Z44

Order number 1165.2305.02

Description

Directional power sensor

200 MHz to 4 GHz

Order number 1417.0409.02

Description

Two-Path diode power sensors

Universal power sensor, 10 MHz to 8 GHz, 100 mW, two-path

Order number 1417.0309.02

Description

Two-Path diode power sensors

Universal power sensor, 10 MHz to 18 GHz, 100 mW, two-path

Order number 1419.0006.02

Description

Three-path diode power sensor

For USB operation; Measurement range: 100 pW to 200mW; Frequency range: 10 MHz to 8 GHz; N (m) connector

Order number 1419.0029.02

Description

Three-path diode power sensor

For USB operation

Order number 1419.0064.02

Description

Three-path diode power sensor

For USB operation

Order number 1419.0041.02

Description

Three-path diode power sensor

For USB operation

Order number 1419.0087.02

Description

Three-path diode power sensor

For USB operation

Order number 1424.6115.02

Description

Thermal power sensor

300 nW to 100 mW, DC to 18 GHz

Order number 1424.6138.02

Description

Thermal power sensor

300 nW to 100 mW, DC to 33 GHz

Order number 1424.6150.02

Description

Thermal power sensor

300 nW to 100 mW, DC to 40 GHz

Order number 1424.6173.02

Description

Thermal power sensor

Order number 1424.6196.02

Description

Thermal power sensor

Order number 1424.6473.02

Description

Thermal Power Sensor

Order number 1424.6215.02

Description

Thermal power sensor

Order number 1424.6796.02

Description

Average Power Sensor

100 pW to 200 mW, 8 kHz to 6 GHz

Order number 1424.6815.02

Description

Average Power Sensor

100 pW to 200 mW, 8 kHz to 18 GHz

Wideband power sensors
Product
Description

Order number 1137.9009.02

Description

Wideband Power Sensor

50 MHz to 18 GHz, 100 mW

Order number 1411.7501.02

Description

Wideband Power Sensor

Time domain analysis and automatic pulse analysis for radar applications and universal use

Order number 1417.0109.40

Description

Wideband Power Sensor

Time domain analysis and automatic pulse analysis for radar applications and universal use

Order number 1417.0109.44

Description

Wideband Power Sensor

Time domain analysis and automatic pulse analysis for radar applications and universal use

Power sensors & adapter cables
Product
Description
R&S®FSH-Z144

Order number 1145.5909.02

Description

USB adapter cable

for R&S®FSH-Z14/R&S®FSH-Z44 power sensors

R&S®NRP-Z4

Order number 1146.8001.02

Description

USB adapter cable (passive), length: 2 m

R&S®NRP-ZKU

Order number 1419.0658.03

Description

USB-A interface cable, length: 1.5 m

Optical power sensor and accessories
Product
Description
R&S®HA-Z360

Order number 1334.5162.00

Description

OEM USB Optical Power Meter (Germanium)

R&S®HA-Z361

Order number 1334.5179.00

Description

OEM USB Optical Power Meter (filtered InGaAs)

R&S®HA-Z362

Order number 1334.5185.00

Description

SC Adapter for Optical Power Meter

R&S®HA-Z363

Order number 1334.5191.00

Description

LC Adapter for Optical Power Meter

R&S®HA-Z364

Order number 1334.5204.00

Description

2.5 mm Universal Adapter for Optical Power Meter

R&S®HA-Z365

Order number 1334.5210.00

Description

1.25 mm Universal Adapter for Optical Power Meter

R&S®HA-Z366

Order number 1334.5227.00

Description

Patch Cord SC-LC SM, SX, length: 1 m

R&S®HA-Z367

Order number 1334.5233.00

Description

Patch Cord SC-SC SM, SX, length: 1 m

Further information

Spectrum & Vector network analyzers promotion

Widest variety of fully equipped products up to 48% off, now until August 31st, 2021

More information

Mobile network testing

Mobile network testing solutions from Rohde & Schwarz let you reconcile your current and future dilemmas.

More information

Teaching-Software for Multi-User Student Labs

The R&S®CDS campus dashboard software simplifies teaching of student groups in laboratories with multiple workbenches.

More information

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.