Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
1108 Results
DTV IP Inserter DIP1. Network for IP Insertion2. Insertion rate up to 10 Mbps3. Insertion rate higher than 10 Mbps4. Demonstration Scenario5. Demonstration Scenario End to End
30-Mar-2001 | AN-No. FTK01_0E
Most of the tests specified in the 3GPP standard TS 34.121 [1] Release 6 (Rel-6) can be performed with the R&S®CMW500. This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to take Rel-6 measurements on transmitter characteristics and execute performance tests according to TS 34.121 V9.7.0, clauses 5 and 10. Test cases that require fading simulation can also be carried out with the aid of a standalone R&S®CMW500 that has been configured with a built-in fading simulator option. That greatly reduces test setup complexity. Furthermore, the R&S®CMW500's wizard enables easy configuration of the test setup for various HSUPA subtests as specified by TS34.121 [1]. The procedure detailing how the wizard is used is also explained for each test case. The test cases mentioned in this application note are carried out using Rel-6 user equipment (UE) that supports Operating Band I and Power Class 3.
27-Nov-2013 | AN-No. 1CM97
White noise of a defined power is superimposed on the DVB signal. From the noise and the modulated DVB signal, the S/N respectively the C/N ratio in dB (with consideration of the 'roll off' factor) can be calculated. After conversion, the corresponding BER is obtained for each S/N value.
08-May-2002 | AN-No. 7BM03
- not available -
05-Aug-2010 | AN-No. 7BM26
Due to the fact that Microsoft does not maintain the Visual Studio .NET 2003 anymore Rohde & Schwarz has to use the successor compiler product Visual Studio .NET 2005 for building the test case packages. All CRTU-G customers having proprietary test case packages, developed based on Visual Studio .NET 2003, can migrate them to Visual Studio .NET 2005. This is required when the proprietary test case packages are going to be enhanced on a platform with installed Visual Studio .NET 2005.
28-Nov-2007 | AN-No. 1CM63
The need for an objective evaluation of mobile network quality and performance drives two fundamentally different approaches, crowdsourcing and mobile network testing. The crowdsourcing market is highly saturated. More than 20 companies have a significant focus on crowdsourcing mobile network measurements. To get measurement results, they use different concepts that serve different purposes. This application card describes the structure of the crowdsourcing space and analyzes the pros and cons of both approaches.
06-Oct-2022
Determining the noise figure of a component can be difficult in unshielded lab environments. Measuring small noise figures (less than 3 dB) and reproducing the results is sometimes not possible. These difficulties are caused by interference effects (electric fields) that can occur in any environment. A suitable remedy is a measurement environment able to shield the Device Under Test (DUT) against all interfering fields in the range up to 3 GHz. When used in conjunction with a spectrum analyzer and Noise Measurement Software FS-K3, the Shielded Box ZA-SB10 provides a complete noise measurement system.
16-Oct-2002 | AN-No. RSH01
The high-definition multimedia interface (HDMI™) is used to transmit audio and video data. HDMI has become the standard for a variety of consumer electronic products, such as Blu-ray™ players, A/V receivers, set-top box, TV monitors and digital video/ still cameras. The HDMI interface measurements needed for these products require specialized T&M equipment. This equipment is not only needed for certification, but is also used for a variety of tests during development, for quality assurance and for end-of-line production testing. The R&S®VTC, R&S®VTE and R&S®VTS video testers from Rohde & Schwarz make it possible to test A/V interfaces such as HDMI easily, reliably and cost efficiently. This application note focuses on functional testing and debugging of HDMI interfaces using the R&S®VTC/VTE/VTS. It explains how these instruments can be used to assess the HDCP implementation, the ARC or the CEC functionality.
04-Jun-2014 | AN-No. 7BM85
A new calibration method, presented by John R. Juroshek (NIST), offers fast and accurate determination of the equivalent source match of three-port devices like power-splitters and directional-couplers. The measurement result is directly displayed as normal trace on the R&S ZVM or R&S ZVK and can be stored in the most common data-formats for further processing and documentation.
13-Dec-2002 | AN-No. 1EZ51
When monitoring transmission systems it is often necessary to control the monitoring equipment and to check the measurement results from a remote station. The user may also be interested to know which transmission data cause an error or violate a standard. Rohde & Schwarz offers several instruments that meet all these requirements in the field of digital TV transmission. This application note gives an overview of the design and use of a DTV monitoring system made up of the above-mentioned instruments and meeting the requirements.
15-Feb-2002 | AN-No. 7BM38
In frequent cases, it appears that the MPEG2 decoder is not located in the control/monitoring room. The present application note describes how to operate a remote control of up to four DVMDs over an ethernet link.
31-Mar-1999 | AN-No. 7BM01
Coaxial connectors are a key component in RF and microwave applications. Their importance and contribution to overall system performance is sometimes overlooked. This application note focuses on coaxial connectors found in RF and microwave applications, providing general information on the available types; how to take care of connectors and connector electrical properties. This information is essential for anyone specifying and using Rohde and Schwarz test and measurement equipment and will help with the selection of the correct types of coaxial connector, handling connectors to obtain accurate and repeatable measurements, and to maximize the longevity and performance of coaxial connectors.
09-Apr-2015 | AN-No. 1MA99
This application note describes how to determine the uncertainty bounds for a given artificial network impedance for an estimate of the combined standard measurement uncertainty using the Rohde & Schwarz Software “AN Impedance Uncertainty Contribution”.
17-Dec-2010 | AN-No. 1EE23
High Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access (HSUPA) optimize UMTS for packet data services in downlink and uplink, respectively. Together, they are referred to as High Speed Packet Access (HSPA). Within 3GPP Release 7, 8, 9 and 10, further improvements to HSPA have been specified in the context of HSPA+ or HSPA evolution. This White Paper introduces key features of HSPA+ and outlines the changes to the radio interface.
14-Feb-2012 | AN-No. 1MA205
Most of the HSDPA tests specified in the TS 34.121 for 3GPP Release-5 / -7 and -8 can be performed with an R&S®CMW500. This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to perform HSDPA Tests (from Rel.5 up to Rel.8 / DC-HSDPA+) measurements on transmitter characteristics and receiver characteristics in line with TS 34.121 V9.5.0, clauses 5 and 6. A set of save files based on R&S®CMW500 firmware V3.0.10 for user equipment supporting Operating Band I with Power Class 4 is attached to this application note for easy recall of important settings while performing tests in line with the relevant specifications.
17-Aug-2012 | AN-No. 1CM96
1TD04 1TD04, DC/DC, Oscilloscopes The objective of this paper is to evaluate the performance of a power supply using an oscilloscope. The main measurements taken are the input frequency, output voltage, output current, and the switching frequency. Initial Evaluation of a DC/DC Switch Mode Power Supply 1TD04 1TD04, DC/DC, Oscilloscopes The objective of this paper is to evaluate the performance of a
26-Nov-2013 | AN-No. 1TD04
All models of the receiver family ESXS are equipped with a remote-control interface to IEC 625-2 (IEEE 488.2). Via this bus almost all instrument settings can be effected, measurements triggered and test results read in by the PC.
18-Jan-2002 | AN-No. 1EE05
Secure interconnection of ATC voice networks
11-Mar-2019
Getting EMI emissions under control is one of those tasks that R&D engineers do not enjoy doing . EMI must often be taken into consideration as early as the design phase, particularly in the case of power electronics systems with increasing switching speeds of wideband gap semiconductors. While EMI receivers or spectrum analyzers are always the preferred choice for these measurements, they are often not available as standard measurement equipment in the R&D lab. To allow optimization early on in the R&D lab, Rohde & Schwarz provides a free tool to simplify conducted emissions debugging using oscilloscopes.
27-Sep-2021 | AN-No. 1SL372
This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.
15-Sep-2012 | AN-No. 1MA206
The constantly increasing number of telecommunication services and subscribers is putting more and more pressure on the availability of already scarse frequencies. Authorities responsible for monitoring and regulating the radio traffic are confronted with more and more complex problems relating to radiomonitoring and frequency management. Without exact data - a prerequisite for monitoring existing installations and planning new services - it is impossible to solve the problem. It is essential to use the proper measurement equipment. This Application Note deals with the following measurements: Measuring various signal parameters at defined frequencies. Monitoring emissions for compliance with specified limits for field strength, modulation depth/index, frequency deviation and offset.
18-Jan-2002 | AN-No. 1EE13
This application note describes how noise figure and gain of amplifiers or converters in the microwave range from 50 GHz to 67 GHz are measured. For this purpose the R&S FSU67 spectrum analyzer is equipped with application firmware R&S FS-K30 in combination with the Noisecom NC5115-60G, or NC5115-60GT Noise Figure Test Set.
12-May-2009 | AN-No. 1EF64
The option R&S®EMC32-K24 extends the emission measurement of the EMI Auto Test (R&S®EMC32-K10) with interactive measurement capabilities. This extension is useful for test verification and measurement during product improvement.
25-Jun-2014 | AN-No. 1SP06
This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Android™ tablet as if working on it locally. Step-by-step procedures are provided for setting up and configuring the T&M instrument and the tablet. On the tablet, a special App implements the Windows® 'Remote Desktop' functionality. T&M instrument and tablet are connected via WLAN (also called Wi-Fi network).
22-Aug-2013 | AN-No. 1MA236
Femtocells or Home base stations are an important development for cellular networks. This application note describes the tests commonly used during the production of Femtocells, focusing on WCDMA, HSPA, and HSPA+ technology. Tests, test plans and hardware setups for Femtocells with and without receiver diversity are detailed. Find hints about the instrument settings and have a look at typical measurement results. An introduction to simulating GPS / A-GPS signals for testing the GPS receiver of a Femtocell completes the paper.
02-Feb-2012 | AN-No. 1MA139
The option R&S®EMC32-K23 extends the emission measurement of the EMI Auto Test (R&S®EMC32-K10) with 3D measurement capabilities.This extension is useful to display the 3D radiation pattern of each frequency.This Application Notes shows all necessary settings for 3D measurement.
26-Aug-2014 | AN-No. 1SP08
- not available -
20-Jul-2001 | AN-No. 7BM13