7916 Results
The Hameg Value Service is an extra service proviede free of charge by Hameg Instruments GmbH.
List of HAMEG Products with 3 years warranty exention
Useful tips and tricks for your first measurement experience
Resistors, capacitors and inductors are the most basic components in electric circuits. It must be ensured that they work properly and accurately. Therefore, they need to be tested thoroughly during circuit design. This is usually done using LCR meters, which have become indispensable in the lab and in production. This application note looks at how to perform basic capacitor and inductor measurements accurately and reliably.
22-Feb-2024 | AN-No. 1GP142
30-May-2023
Rohde & Schwarz and IEMN collaborate on 6G THz by bringing together electronic and photonic technologiesThe Institute of Electronics, Microelectronics and Nanotechnology (IEMN, Lille, France) and Rohde & Schwarz have expanded their collaboration to research THz communications that utilize photonic technologies. In a recent demonstration, IEMN reached a milestone when researchers achieved generated a 300 GHz bidirectional link over an outdoor distance of 645 m for use in future 6G backhauling scenarios. The R&S SMA100B microwave signal generator from Rohde & Schwarz was a crucial component in the performance test setup. The R&S SMA100B provides an ultra-low phase noise signal that helps accelerate THz communications research and development to ready it for industrialization.
28-Nov-2023
Unique Rohde & Schwarz 170 GHz power sensors ease use and traceability in the D-bandRohde & Schwarz is launching the new R&S NRP170TWG(N) thermal power sensor for precise power level measurements in the D-band. It is the only RF power sensor on the market that offers full traceability to national metrology institutes (NMI) in the frequency range from 110 GHz to 170 GHz, an important prerequisite for commercializing the frequency band. The R&S NRP170TWG(N) hardware is designed to reduce measurement noise and drift, while remaining very accurate and easy to use. The sensors are fully calibrated plug & play devices that can be easily integrated into any measurement setup with a USB or LAN connection.
29-Feb-2024
Rohde & Schwarz focuses on efficiency, sustainability and ease of use at NAB2024Rohde & Schwarz will showcase the latest developments across its transmitter and media solutions at NAB2024 (booth SU4039, Las Vegas Convention Center, 14 – 17 April). The focus is firmly on delivering real monetizable benefits and lowering the carbon impact of broadcast and media technologies.
26-Mar-2024
embedded world 2024: Rohde & Schwarz presents its cutting-edge test solutions for embedded systemsRohde & Schwarz offers comprehensive test and measurement solutions for embedded design challenges for today’s requirements for efficiency, safety, reliability and interoperability. The highlights will be showcased at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.
21-Aug-2023
Rohde & Schwarz and MediaTek successfully verify 5G RedCap Rel. 17 connectivity with the R&S CMX500 OBTRohde & Schwarz and MediaTek partner to verify MediaTek’s 5G RedCap test platform, enabling 5G standalone devices like industrial sensors and always connected wearables. R&S CMX500 OBT tester supports RedCap and Release 17 features.
15-Feb-2024
Rohde & Schwarz enables Qualcomm to pioneer new frequency ranges for future 5G-Advanced and 6G networksRohde & Schwarz T&M equipment plays key role in enabling Qualcomm Technologies to show the readiness and effectiveness of the latest RF modem technology for FR3, the future frequency ranges for 5G-Advanced and 6G.
12-Sep-2023
Rohde & Schwarz continues to drive early 6G and sub-THz research with new dedicated W and D band test solutionsRohde & Schwarz rolls out cutting-edge RF test & measurement solutions for mmWave and sub-THz research at EuMW 2023 to characterize devices for 6G and novel sensing and automotive radar applications of tomorrow.
21-Feb-2024
Skylo achieves successful phase 1 validation of NTN test plan with Rohde & SchwarzRohde & Schwarz has reached a major milestone: its NTN Netop test solutions have been accepted as part of Skylo’s NTN Certification Program.
21-Dec-2023
Rohde & Schwarz and VIAVI jointly verify Analog Devices’ leading O-RU reference design at i14y Lab PlugFest Fall 2023Rohde & Schwarz and VIAVI Solutions have presented their integrated solution for conformance testing of O-RAN Radio Units at the recent O-RAN ALLIANCE Global PlugFest Fall 2023, hosted at the i14y Lab in Berlin – supported by Deutsche Telekom and EANTC and i14y consortium partners.
R&S®Series4200 Software Defined Radios - Product Brochure
R&S DDF260 Digital Direction Finder - Product Brochure
R&S ATS1000 Antenna Test System - Product Brochure
25-Jan-2024
Rohde & Schwarz at MWC 2024: T&M solutions for the mobile industry that enable connection and empower innovationRohde & Schwarz will showcase at MWC Barcelona 2024 under the motto “Enabling Connections, Empowering Innovations” a wide-ranging portfolio that helps industry leaders, manufacturers and visionaries turn their ideas for new mobile products, applications and technologies into reality.
19-Jun-2023
Rohde & Schwarz and VIAVI Solutions verified new 4T4R O-RU design from Benetel at O-RAN ALLIANCE Global PlugFest Spring 2023At the i14y Lab, Rohde & Schwarz, VIAVI and Benetel combined their industry-leading capabilities to showcase their integrated, automated testing solution for the conformance testing of O-RAN radio units (O-RUs). This solution was used to test the commercial grade 4T4R RAN650 O-RU from Benetel according to O-RAN ALLIANCE and 3GPP specifications.
23-Jan-2024
Rohde & Schwarz to host Demystifying EMC conference as full day webinar in 2024Rohde & Schwarz hosts its popular industry event, Demystifying EMC, on February 6, 2024. The one-day virtual conference kicks off a program of EMC industry expert sessions.
28-Mar-2024
Rohde & Schwarz first to show measurements on novel Bluetooth® Channel Sounding signals for positioning accuracyRohde & Schwarz will present the first real-time measurements on the planned new Bluetooth® signals to support Channel Sounding. The demonstration at the embedded world Exhibition & Conference in Nuremberg, Germany, will be run on an R&S CMW500 wideband radio communication tester. The Bluetooth® Channel Sounding feature will enable unprecedented positioning accuracy for consumer and commercial applications. The signal measurement capabilities to support chip and device development are eagerly awaited by the industry.
21-Feb-2024
Rohde & Schwarz and SmartViser partner to demonstrate test solutions for new EEI regulationRohde & Schwarz and SmartViser have partnered to develop a solution for testing compliance with a new regulation that will require Energy Efficiency Index (EEI) labeling for smartphones and tablets sold in the EU.
Rohde & Schwarz User Manual for the DRM application of the signal generator R&S®SMCV100B, option R&S®SMCVB-K160.
Rohde & Schwarz user manual for the ISDB-T/TSB application of the R&S®SMCV100B, option R&S®SMCVB-K165.
Rohde & Schwarz Quick Start Guide for R&S®FSVA and R&S®FSV Signal and Spectrum Analyzer; Provides the information required to prepare the instrument for use and start working. Basic operations and handling are described.
Rohde & Schwarz User Manual for the R&S®SMB100B signal generator, including hardware options.
Rohde & Schwarz User Manual for R&S®EDS300; describes all instrument functions and remote control commands, as well as measurement and programming examples.
Rohde & Schwarz user manual for the R&S®AREG100A Automotive Radar Echo Generator, including hardware options.