Voice communications system for civil air traffic control

Low speed serial buses such as I2C/SPI, RS-232/UART and Manchester/NRZ on your Rohde & Schwarz instrument. Your oscilloscope can provide a system-level view of one or more serial buses that is time correlated with other system events

R&S®GB5400 controller working position – intuitive VCS interface for full controller flexibility and versatility.

The R&S®ZNB vector network analyzer features a wide dynamic range, low trace noise and high output power and is targeted at applications in the electronic goods and mobile radio industries.

The R&S®ZNB3000 vector network analyzer is optimized for high-volume production and demanding applications, thanks to industry-leading measurement speed, stability and scalability.

The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The R&S®ZNL is a cost-efficient, portable vector network and spectrum analyzer, ideal for development, production and in the field

The R&S®ZNLE is a cost-efficient benchtop vector network analyzer. The analyzer's excellent performance makes it ideal for education, development and production.

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Learn more.

ZNBT true multiport VNA vector network analyzer with up to 24 true VNA ports. Frequency range from 9/100 kHz to 8.5/20/26.5/40 GHz.

R&S®ZVH handheld cable & antenna analyzer increases efficiency in the field. Frequency range from 100 kHz to 3.6 GHz / 8 GHz.

ZV-Z5x series of automatic economy calibration units. Upper frequency ranging from 3 GHz (2 ports, 75 Ω) to 8 GHz (8 ports), 20 GHz (6 ports)

ZN-Z15x automatic economy calibration units series up to 8.5 GHz: 2, 4 or 6 ports SMA(f), ZN-Z154 up to 24 ports, 2-port type N(f). ZN-Z156: 2 ports 67 GHz.

ZN-Z1xx (ZN-Z170, ZN-Z135, ZN-Z129, ZN-Z129E up to 43.5 GHz) economy vector network analyzer calibration kits, 4-in-1 design: open, short, match , through combined in a compact unit. Separate male and female models.

ZCAN Network Analyzer Calibration Kit - Economy calibration kit with N-type calibration standards open, short, match, through, all in both, male and female versions. Up to 3 GHz. Available for 50 Ω and 75 Ω reference impedance.

High-end manual calibration kits, male and female standards, up to 18 GHz, 33 GHz, S-parameter based characterization.

R&S®ZN-Z2xx: high-end manual calibration kits, male and female standards, up to 110 GHz, S-parameter based characterization.

High-end VNA test cables with ruggedized connectors, armored construction for exceptional mechanical stability and breakdown withstand to crush forces,18 GHz to 67 GHz.

Calibration accessories for frequency converting measurements, Wide band application

The R&S®ZN‑ZCG comb generator helps with the precise phase calibration of R&S®ZNA VNAs to support phase and delay measurements with LO access.

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 and 4 port models available. ZN-Z51 has configurable test ports.

Verification kits are used to perform uncertainty evaluations of vector network analyzers. Option R&S®ZNA-K50(P) provides additional uncertainty analysis.

ZN-Z3x: Automatic recalibration without reconnecting calibration equipment. Supports TVAC, multiport and production systems. CAN bus network control. Up to 40 GHz.

Network analyzer waveguide calibration kits, up to 1100 GHz, models with sliding match.

Switchable step attenuator, base units up to 6/18 GHz, 0.1/1 dB step size, extendable by external modules to 40/67 GHz. Up to 139 dB attenuation range.

ZV-Z19x: High-end VNA test cables, lightweight at an outstanding RF performance, 18 GHz to 110 GHz.

R&S®ZN-Z1Exx economy calibration units from 5 kHz to 26.5 GHz. Two configurable ports: 3.5 mm-compatible or N-type. Further configurable as m or f.

Switch matrix - configurable switch matrix for up to 48 network analyzer ports, up to 26.5 GHz.

The R&S®ATS1500C is designed, tailored and manufactured to provide an ideal environment for automotive radar sensor development, validation and calibration.