Search

Find relevant information on products, solutions or downloads quickly by using our general search: Type in a keyword, choose a category and select from the active subcategories to get what you need.

Results 1 - 10 of 12 zvl6

Did you find what you're looking for? If not, repeat the search on our International Website

  • R&S®ZVL6 Vector Network Analyzer

    R&S®ZVL6 Vector Network AnalyzerFrequency range: 9 kHz to 6 GHz Test ports: N(f), 50 ΩOverview OptionsKey FactsThe R&S®ZVL3, R&S®ZVL6, and R&S®ZVL13 vector network analyzers only differ with respect to their upper frequency limits (3 GHz, 6 GHz, and 13.6 GHz). Key FactsLXI Class C conformantThe R&S®ZVL3, R&S®ZVL6, and R&S®ZVL13 vector network analyzers only differ with respect to their upper frequency limits (3 GHz, 6 GHz, and 13.6 GHz).R&S®ZVL6:Specified frequency range 9 kHz to 6 GHzFrequency overrange (unspecified): 5 kHz to 6 GHzImproved trace noise characteristics

    Products
  • R&S®ZVL13 Vector Network Analyzer

    R&S®ZVL13 Vector Network AnalyzerFrequency range: 9 kHz to 13.6 GHz Test ports: N(f), 50 ΩOverview OptionsKey FactsThe R&S®ZVL3, R&S®ZVL6, and R&S®ZVL13 vector network analyzers only differ with respect to their upper frequency limits (3 GHz, 6 GHz, and 13.6 GHz). Key FactsLXI Class C conformantThe R&S®ZVL3, R&S®ZVL6, and R&S®ZVL13 vector network analyzers only differ with respect to their upper frequency limits (3 GHz, 6 GHz, and 13.6 GHz).R&S®ZVL13:Specified frequency range 9 kHz to 13.6 GHzFrequency overrange (unspecified): 5 kHz to 15 GHzImproved trace noise characteristics

    Products
  • R&S®ZVL3 Vector Network Analyzer

    R&S®ZVL3 Vector Network AnalyzerFrequency range: 9 kHz to 3 GHz Test ports: N(f), 50 ΩOverview OptionsKey FactsThe R&S®ZVL3, R&S®ZVL6, and R&S®ZVL13 vector network analyzers only differ with respect to their upper frequency limits (3 GHz, 6 GHz, and 13.6 GHz). Key FactsLXI Class C conformantThe R&S®ZVL3, R&S®ZVL6, and R&S®ZVL13 vector network analyzers only differ with respect to their upper frequency limits (3 GHz, 6 GHz, and 13.6 GHz).R&S®ZVL3:Specified frequency range 9 kHz to 3 GHzFrequency overrange (unspecified): 5 kHz to 3 GHzImproved trace noise characteristics

    Products
  • R&S®FSL-K72 3GPP FDD BTS Application Firmware

    testing, and enhances the analyzer's range of applications to include the following measurements:The R&S®FSL-K72 is also available for the R&S®ZVL3 and R&S®ZVL6 Vector Network Analyzers (with the R&S®ZVL-K1 spectrum analysis option).Code domain powerError vector magnitude (EVM)Peak code domain errorChannel table, with overview of channels used on base stationPowerACLRSpectrum emission maskCCDF and APD

    Products
  • R&S®ZVL3-75 Vector Network Analyzer

    R&S®ZVL3-75 Vector Network AnalyzerFrequency range: 9 kHz to 3 GHz Test ports: N(f), 75 ΩOverview OptionsKey Facts 75 Ω version from 9 kHz to 3 GHz Easy exchange of damaged inner (female) conductors Key FactsLXI Class C conformant75 Ω version from 9 kHz to 3 GHzEasy exchange of damaged inner (female) conductorsMost of the R&S®ZVL3 / R&S®ZVL6 options are available for the R&S®ZVL3-75 (See data sheet, under “Ordering information”)

    Products
  • R&S®FSL-K7 AM/FM/φM measurement demodulator

    characteristics of the useful modulation, but also factors such as residual FM or synchronous modulation.The R&S®FSL-K7 is also available for the R&S®ZVL3 and R&S®ZVL6 Vector Network Analyzers.Display and evaluation capabilitiesModulation signal versus timeSpectrum of modulation signal (FFT)RF signal power versus timeSpectrum of RF signal (FFT versus max. 18 MHz)Table with numeric display

    Products
  • R&S®FSL-K30 Noise figure and gain measurements

    parameters can be measured at a specified frequency or in a selectable frequency range:Noise figure in dBNoise temperature in KGain in dBCompared with conventional noise measurement systems, R&S®FSL-K30 has the advantage that a wide variety of further RF measurements can also be performed.The R&S®FSL-K30 is also available for the R&S®ZVL3 and R&S®ZVL6 Vector Network Analyzers (with the R&S®ZVL-K1

    Products
  • R&S®FSL-K8 Transmitter measurements for Bluetooth® V2.0 and EDR

    ® transmitters.All measurements are carried out in line with the Bluetooth® RF Test Specification (Bluetooth® SIG) Rev. 2.0+EDR and cover basic rate as well as EDR. Integrated limit value monitoring is provided for all measurements and allows analysis of the results in the development and production of Bluetooth® modules.The R&S®FSL-K8 is also available for the R&S®ZVL3 and R&S®ZVL6 Vector Network Analyzers (

    Products
  • R&S®ZVL Vector Network Analyzers

    bandwidth, with normalization calibration) <50 ms Data transfer time (201 test points)     Via RSIB over 100 Mbit/s LAN 1.5 ms Dynamic range at 10 Hz measurement bandwidth (20 MHz to 3 GHz) >115 dB, typ. 123 dB (ZVL3,ZVL6) > 100 dB, typ. 105 dB (ZVL13) Output power range –50 dBm to 0 dBm, typ. –60 dBm to +10 dBm (ZVL3, ZVL6 and ZVL3-75) Measurement bandwidths 10 Hz to 500 kHz in 1/2/5 steps Trace noise <

    Products
  • R&S®FSL-K93 WiMAX™ IEEE 802.16 OFDM/OFDMA Application Firmware

    R&S®FSL-K93 WiMAX™ IEEE 802.16 OFDM/OFDMA Application FirmwareOverview Key Facts Supports OFDM and OFDMA Provides complex WiMAX™ measurements at a keystroke Performs measurements in the RF/IF range and in the baseband Key FactsExpands the R&S®FSL, R&S®ZVL3 and R&S®ZVL6 analyzers by adding the capability to perform spectrum and modulation measurements on signals in line with the and

    Products
Results 1 - 10 of 12
Previous  1  2  Next
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Download

Please enter your first name.

Please enter a valid email address.

Please enter your name.

Please enter your company name.

Please enter your location.

Marketing permission
Please enter the characters shown in the image
show captcha

The input was not correct.
Content types Download types
International Website