R&S®ESL EMI test receiver

Compact, cost-effective measuring receiver

R&S®ESL EMI test receiver
Ingrandisci immagine
R&S®ESL EMI test receiver
Ingrandisci immagine
R&S®ESL EMI test receiver
Ingrandisci immagine
R&S®ESL EMI test receiver
Ingrandisci immagine
R&S®ESL EMI test receiver
Ingrandisci immagine
R&S®ESL EMI test receiver, Front view R&S®ESL EMI test receiver, Front High R&S®ESL EMI test receiver, Side view R&S®ESL EMI test receiver, Back view R&S®ESL EMI test receiver, Front Low

Key Facts

  • Frequency range from 9 kHz to 3 GHz or 6 GHz
  • All major functions of an advanced EMI test receiver
  • Weighting detectors: peak, RMS, quasi-peak, average and RMS-average
  • Compact, lightweight instrument, battery powered for mobile use

Compact, cost-effective measuring receiver

The R&S®ESL EMI test receiver combines two instruments in one, measuring EMC disturbances in accordance with the relevant standards and also serving as a full-featured spectrum analyzer for diverse lab applications. The combination of very good RF characteristics and all of the important functions needed for fast, precise measurement and evaluation of the EMC of a device under test in accordance with commercial standards is unmatched in this instrument class. The diverse analysis capabilities, high measurement speed and time-saving automated test routines make the R&S®ESL the obvious choice for any development lab with small budget that needs to prepare for EMC certification tests.

Features & benefits

Very good RF characteristics

Precise, reproducible measurements thanks to very good RF characteristics

  • 0.5 dB amplitude accuracy
  • 1 dB compression +5 dBm
  • RF input pulse-resistant up to 10 mWs
  • Displayed average noise level with preamplifier <–152 dBm (1 Hz)
  • Resolution bandwidths 10 Hz to 10 MHz (–3 dB), 200 Hz, 9 kHz, 120 kHz (–6 dB), 1 MHz (impulse)

Detailed level analysis
Ingrandisci immagine

Detailed level analysis

Top: continuously updated level values for up to four selected detectors bottom: spectrum measurement with up to six traces (based on scan table settings)

Unrivaled price/performance ratio

Unrivaled price/performance ratio in its class

  • Two test instruments in one: EMI test receiver and spectrum analyzer
  • Low investment costs
  • Best RF characteristics available in this instrument class
  • Extensive measurement functions and evaluation features
  • Cost-saving plug & play options

Circuit board analysis
Ingrandisci immagine

Circuit board analysis

Analysis of radiated emissions using a near field probe (R&S®HZ-14)

Intuitive operation

Intuitive operation – as with all  EMI test receivers from Rohde & Schwarz

  • Clear scan settings in table format
  • Able to perform simultaneous measurements with multiple detectors
  • Predefined antenna factors and limit lines in accordance with commercial standards
  • Selective monitoring of critical disturbances using tune to marker and marker track functions
  • Simultaneous measurements with up to four detectors
  • Large bargraph display with max. hold function for clear presentation of measured values

Scan table configuration
Ingrandisci immagine

Scan table configuration

Defined parameters for various frequency ranges are used automatically to ensure reproducible, standard-compliant measurements.

Available models

Available models
Modelli
Frequency range
Tracking generator

R&S®ESL3

Order Number 1300.5001.03

Frequency range
 9 kHz to 3 GHz
Tracking generator
Not available

R&S®ESL3

Order Number 1300.5001.13

Frequency range
 9 kHz to 3 GHz
Tracking generator
Integrated

R&S®ESL6

Order Number 1300.5001.06

Frequency range
 9 kHz to 6 GHz
Tracking generator
Not available

R&S®ESL6

Order Number 1300.5001.16

Frequency range
 9 kHz to 6 GHz
Tracking generator
Integrated

Available options

General
Product
Descrizione
R&S®FSL-B4

Order Number 1300.6008.02

Descrizione

OCXO reference frequency

High precision frequency reference

R&S®FSL-B5

Order Number 1300.6108.02

Descrizione

Additional interfaces

video out, IF out, noise source control, AUX port, connector for the R&S®NRP power sensors

R&S®FSL-B8

Order Number 1300.5701.02

Descrizione

Gated sweep function

Displays the modulation spectra of GSM or WLAN signals. Requires R&S®ZVL-K1

R&S®FSL-B10

Order Number 1300.6208.02

Descrizione

GPIB interface

R&S®FSL-B22

Order Number 1300.5953.02

Descrizione

RF preamplifier

3 GHz/6 GHz

R&S®FSL-B30

Order Number 1300.6308.02

Descrizione

DC power supply

DC power supply socket. 12V to 28V

R&S®FSL-B31

Order Number 1300.6408.02

Descrizione

NiMH battery pack

(requires R&S®FSL-B30)

General analysis
Product
Descrizione
R&S®FSL-K7

Order Number 1301.9246.02

Descrizione

AM/FM/φM measurement demodulator

Turns the R&S®ZVL into an analog modulation analyzer for amplitude, frequency, or phase modulated signals. Requires R&S®ZVL-K1

R&S®FSL-K9

Order Number 1301.9530.02

Descrizione

Power sensor support

(requires R&S®FSL-B5 or R&S®NRP-Z4 and R&S®NRP power sensors)

Order Number 1301.9817.02

Descrizione

Noise figure and gain measurements

(requires R&S®FSL-B5, and a preamplifier)

General accessories
Product
Descrizione
R&S®ZZA-S334

Order Number 1109.4487.00

Descrizione

19" rackmount adapter

For mounting a 3/4 19" housing 3 RU high in a standard 19" rack

R&S®FSL-Z3

Order Number 1300.5401.00

Descrizione

Soft carrying bag

R&S®EVS-Z6

Order Number 5201.7760.00

Descrizione

Protective hard cover

R&S®FSL-Z4

Order Number 1300.5430.02

Descrizione

Additional charger unit

R&S®RAM

Order Number 0358.5414.02

Descrizione

Matching pad, 75 Ω, L section

bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section

R&S®RAZ

Order Number 0358.5714.02

Descrizione

Matching pad, 75 Ω, series resistor 25 Ω

0 Hz to 2.7 GHz

R&S®FSH-Z38

Order Number 1300.7740.02

Descrizione

Matching pad 50/75 Ω, L section, N to BNC

bidirectional, 0 Hz to 1 GHz, BNC female/N male connectors, load capacity 1 W

R&S®NRP-Z11

Order Number 1138.3004.02

Descrizione

Average Power Sensor

10 MHz to 8 GHz, 200 mW

R&S®NRP-Z21

Order Number 1137.6000.02

Descrizione

Average Power Sensor

10 MHz to 18 GHz, 200 mW

R&S®NRP-Z22

Order Number 1137.7506.02

Descrizione

Average Power Sensor

10 MHz to 18 GHz, 2 W

R&S®NRP-Z23

Order Number 1137.8002.02

Descrizione

Average Power Sensor

10 MHz to 18 GHz, 15 W

R&S®NRP-Z24

Order Number 1137.8502.02

Descrizione

Average Power Sensor

10 MHz to 18 GHz, 30 W

R&S®NRP-Z27

Order Number 1169.4102.02

Descrizione

Power Sensor Module with Power Splitter

DC to 18 GHz, 500 mW

R&S®NRP-Z37

Order Number 1169.3206.02

Descrizione

Power Sensor Module with Power Splitter

DC to 26.5 GHz, 500 mW

R&S®NRP-Z91

Order Number 1168.8004.02

Descrizione

Average Power Sensor

9 kHz to 6 GHz, 200 mW

R&S®NRP-Z51

Order Number 1138.0005.02

Descrizione

Thermal Power Sensor

0 Hz to 18 GHz, 100 mW

R&S®NRP-Z55

Order Number 1138.2008.02

Descrizione

Thermal Power Sensor
 

0 Hz to 40 GHz, 100 mW

Order Number 1137.9009.02

Descrizione

Wideband Power Sensor

50 MHz to 18 GHz, 100 mW

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Autorizzazione al marketing

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.