R&S®HMC804x DC power supply series

A basic power supply from R&S Essentials

R&S®HMC804x DC power supply series
Ingrandisci immagine
R&S®HMC804x DC power supply series
Ingrandisci immagine
R&S®HMC804x DC power supply series
Ingrandisci immagine
R&S®HMC804x DC power supply series
Ingrandisci immagine
R&S®HMC804x DC power supply series
Ingrandisci immagine
R&S®HMC804x DC power supply series
Ingrandisci immagine
R&S®HMC804x DC power supply series
Ingrandisci immagine
R&S®HMC804x DC power supply, front view R&S®HMC804x DC power supply, side view R&S®HMC804x DC power supply, front view R&S®HMC804x DC power supply, side view R&S®HMC804x DC power supply, front view R&S®HMC804x DC power supply, front view R&S®HMC804x DC power supply, side view

Key Facts

  • Clear display of all measured parameters
  • Galvanically isolated, floating and short-circuit proof outputs
  • Protective functions can be adjusted for each channel
  • Ideal power supply for hardware developers and labs
  • Intuitive, price-transparent online product configurator

A partire da 1.180 EUR

Compact and easy to use

R&S®HMC804x DC power supplies are very energy efficient, helping them remain cool and quiet, even at maximum load. Practical interfaces and connectors make work quick and convenient while comfort functions are available for special application cases. One, two, or three channels – a wide range of functions and fundamental specifications make R&S®HMC804x DC power supplies ideal for:
-Development labs
-Industrial environments
-Manufacturing
-Education
You can now use the new online configurator to quickly design the R&S®HMC804x DC power supply you need with full price transparency. Get your request processed in no time by the authorized distribution partner of your choice.

Features & benefits

Flexible channel configuration

All channels are galvanically isolated and can be combined to drive balanced  circuits or for higher voltages/currents.
Front panel: 4 mm safety sockets (R&S®HMC8041 including SENSE)
Rear panel: WAGO cage clamp for all channels including SENSE Convenient parallel and serial operation

Clear display of all measured parameters

The brilliant QVGA color display (320 x 240 pixel) shows real-time voltage, current and power with high resolution settings and readback of 1 mV and 0.1 mA/1.0 mA (depending on current and model). Low residual ripple from linear postregulation and high energy efficiency give it low heat dissipation and a quiet fan.

Flexible overcurrent protection

FuseLink allows you to freely combine the electronic fuses in each channel. Fuse delays help prevent early switching off due to short current spikes. Overcurrent/overvoltage protection can be set for each channel individually. The electronic fuses can be linked to other channels. Here, the channel that exceeds the maximum current level and all linked channels are switched off. Delay times can also be set to prevent premature switching off because of short current spikes.

Programmable sequences

Arbitrary waveforms can be generated for voltage and current. Functions can be configured and executed via the control panel or external interface.

EasyRamp function

Sometimes test sequences need to avoid spikes in supply voltage. The EasyRamp function can run a linear startup curve within a defined time span.

Remote control

Remote control via USB and LAN. R&S®HMC804x-G models also have an IEEE-488 (GPIB) interface.

Easy to use, price transparent configurator

We let customers choose the right T&M instrument quickly, easily, and with full price transparency. The R&S®HMC804x and other instruments in the R&S®Essentials portfolio can now be configured online with the following benefits:
- User-friendly and easy to navigate configurator
- Full cost transparency at every configuration step
- Fast order processing through authorized distribution partners 
- Next-day delivery from selected partners

Available models

Available models
Modelli
Number of output channels
Max. output power
Output voltage per channel
Output current per channel
Orario d'inizio

R&S®HMC8041

Order Number 3593.1006.02

Number of output channels
1
Max. output power
100 W
Output voltage per channel
0 V to 32 V
Output current per channel
10 A
Orario d'inizio
1.180 EUR

R&S®HMC8041-G

Order Number 3593.1012.02

Number of output channels
1
Max. output power
100 W
Output voltage per channel
0 V to 32 V
Output current per channel
10 A
Orario d'inizio
1.470 EUR

R&S®HMC8042

Order Number 3593.1029.02

Number of output channels
2
Max. output power
100 W
Output voltage per channel
0 V to 32 V
Output current per channel
5 A
Orario d'inizio
1.310 EUR

R&S®HMC8042-G

Order Number 3593.1035.02

Number of output channels
2
Max. output power
100 W
Output voltage per channel
0 V to 32 V
Output current per channel
5 A
Orario d'inizio
1.600 EUR

R&S®HMC8043

Order Number 3593.1041.02

Number of output channels
3
Max. output power
100 W
Output voltage per channel
0 V to 32 V
Output current per channel
3 A
Orario d'inizio
1.460 EUR

R&S®HMC8043-G

Order Number 3593.1058.02

Number of output channels
3
Max. output power
100 W
Output voltage per channel
0 V to 32 V
Output current per channel
3 A
Orario d'inizio
1.740 EUR
Specifications
Electrical specifications
Number of output channels 1/2/3
Total output power max. 100 W
Maximum output power per channel 100 W/50 W/33 W
Output voltage per channel 0 V to 32 V
Maximum output current per channel 10 A/5 A/3 A
Voltage ripple and noise (20 Hz to 20 MHz) R&S®HMC8041: < 1 mV (RMS)
R&S®HMC8042/43: < 450 µV (RMS)
Current ripple and noise (20 Hz to 20 MHz) R&S®HMC8041: < 1.5 mA (RMS) (meas.)
R&S®HMC8042/43: < 1 mA (RMS) (meas.)
Load recovery time (10 % to 90 % load change within a band of ± 20 mV of set voltage) < 1 ms (meas.)
Programming resolution voltage 1 mV
Programming resolution current < 1 A: 0.1 mA (R&S®HMC8041: 0.5 mA)
≥ 1 A: 1 mA
Output measurements
Readback resolution voltage 1 mV
Readback resolution current < 1 A: 0.1 mA (R&S®HMC8041: 0.5 mA)
 ≥ 1 A: 1 mA
Readback accuracy voltage ±(% of output + offset) < 0.05 % + 2 mV
Readback accuracy current ±(% of output + offset) typ. < 0.05 % + 4 mA (R&S®HMC8041: typ. < 0.15 % + 10 mA)
Special functions
Measurement functions voltage, current, power, energy
Protection functions OVP, OCP, OPP, OTP
FuseLink function
Fuse delay at output-on
Sense function
Sink mode -
Output sequencing
Trigger input/output
Arbitrary function ● (EasyArb)
Analog/modulation interface
Data logging
Display and interfaces
Display 3.5" QVGA
Rear panel connections Connector block with 4 lines per channel
Remote control interfaces: standard USB, LAN; R&S®HMC804x-G models with IEEE-488 (GPIB)
Remote control interfaces: optional
General data
Dimensions (W × H × D) 222 mm × 97 mm × 291 mm
Weight 2.6 kg
Rack installation R&S®HZC95 option

Available options

General accessories
Product
Descrizione
R&S®HZ10B

Order Number 3594.6301.02

Descrizione

Silicon Test Lead

banana to banana, 1 m (set of 5, blue)

R&S®HZ10R

Order Number 3594.3860.02

Descrizione

Silicon Test Lead

banana to banana, 1 m (set of 5, red)

R&S®HZ10S

Order Number 3594.3877.02

Descrizione

Silicon Test Lead

banana to banana, 1 m (set of 5, black)

R&S®HZC95

Order Number 5800.2054.02

Descrizione

19" rack adapter, 2HU, for R&S®NGE100B/NGC100/NPA and R&S®HMC series

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Autorizzazione al marketing

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.