Multi-channel power probes

RT-ZVC Multi-Channel Power Probe
Ingrandisci immagine
RT-ZVC High-Dynamic IoT Current Consumption Measurement
Ingrandisci immagine
RT-ZA30 Extended Cable Set for PCB Probing
Ingrandisci immagine
RT-ZA31 Extended Cable Set for 4mm Probing
Ingrandisci immagine
RT-ZA33 Oscilloscope Interface Cable
Ingrandisci immagine
RT-ZA34 Extended Cable Set for 4mm Probing, 1m length
Ingrandisci immagine
RT-ZA35 Extended Cable Set for PCB Probing, 1m length
Ingrandisci immagine
RT-ZA36 Solder-in Cable Set
Ingrandisci immagine
RT-ZA37 BNC type Connector Cable Set
Ingrandisci immagine
RT-ZVC Multi-Channel Power Probe RT-ZVC High-Dynamic IoT Current Consumption Measurement RT-ZA30 Extended Cable Set for PCB Probing RT-ZA31 Extended Cable Set for 4mm Probing RT-ZA33 Oscilloscope Interface Cable RT-ZA34 Extended Cable Set for 4mm Probing, 1m length RT-ZA35 Extended Cable Set for PCB Probing, 1m length RT-ZA36 Solder-in Cable Set RT-ZA37 BNC type Connector Cable Set

Key facts

  • Up to 4 high-sensitivity voltage and current channels
  • 18-bit ADC at 5 Msample/s (for each channel)
  • 1 MHz bandwidth with flexible filtering options
  • Several current ranges from 4.5 uA to 10 A with internal shunt
  • Flexible connectivity options for every application

Brief description

The R&S®RT-ZVC multi-channel power probe offers up to four voltage and four current channels with 18-bit resolution for high dynamic range current and voltage measurements. With up to two R&S®RT-ZVC probes supported on an R&S®RTE or R&S®RTO oscilloscope, it is possible to analyze eight high dynamic range voltage and eight high dynamic range current signals in parallel with signals captured by the oscilloscope.

Caratteristiche e vantaggi

High-sensitivity power consumption analysis

The R&S®RT-ZVC probe provides an extraordinarily high dynamic range for measuring both active and sleep currents, in this example 12 mA and 30 μA. Automated measurements make it possible to calculate the total energy consumption of specific activity phases of the device under test.

Multi-Channel Power Probes
Open Lightbox

High-sensitivity current measurement

High bandwidth with flexible filtering for noise reduction

A bandwidth of 1 MHz and a sampling rate of 5 Msample/s allows you to capture fast current pulses. To analyze the overall power consumption of battery powered devices, the very low sleep-mode currents have to be captured at the same time. For very high dynamic range measurements, the integrated lowpass filter reduces the bandwidth down to 5 kHz and minimizes overall system noise.

Multi-channel power probes
Open Lightbox

Flexible digital acquisition system

Flexible connectivity options for every application

The R&S®RT-ZVC multi-channel power probe comes with a set of high-quality pin connector cables and solder-in leads to connect the probe in typical embedded electronics measurement scenarios. 4 mm connector cables with different lengths are optionally available as are BNC type connector cables for connecting standard oscilloscope voltage and current probes to extend the voltage and current measurement range.

Multi-Channel Power Probes
Open Lightbox

PCB current and voltage probing cable set

Available models

  • Product Name

    R&S®RT-ZVC02

    Order number 1326.0259.02

    Bandwith
    1 MHz
    Number of channels
    2 voltage
    2 current
    Maximum voltage/current
    +/-1.8 V to +/-15 V
    +/-4.5 uA to +/-10 A
    Input Impedance
    10 MΩ || 48 pF
    1 MΩ || shunt
  • Product Name

    R&S®RT-ZVC04

    Order number 1326.0259.04

    Bandwith
    1 MHz
    Number of channels
    4 voltage
    4 current
    Maximum voltage/current
    +/-1.8 V to +/-15 V
    +/-4.5 uA to +/-10 A
    Input Impedance
    10 MΩ || 48 pF
    1 MΩ || shunt
Probe accessories
Product Description
RT-ZA30 Extended cable set for PCB probing
RT-ZA30 Extended cable set for PCB probing

R&S®RT-ZA30

Order number 1333.1686.02

Description

Extended cable set

for R&S®RT-ZVC, PCB probing, 1 current and voltage lead, length: 32 cm

RT-ZA31Extended cable se
RT-ZA31Extended cable se

R&S®RT-ZA31

Order number 1333.1692.02

Description

Extended cable set

for R&S®RT-ZVC, 4 mm probing, 1 current and voltage lead, length: 32 cm

RT-ZA33 Logic probe cable
RT-ZA33 Logic probe cable

R&S®RT-ZA33

Order number 1333.1770.02

Description

Oscilloscope interface cabel

for R&S®RT-ZVC

RT-ZA34 Extended cable set
RT-ZA34 Extended cable set

R&S®RT-ZA34

Order number 1333.1892.02

Description

Extended cable set

for R&S®RT-ZVC, 4 mm probing, 1 current and voltage lead, length: 1 m

RT-ZA35 Extended cable set for PCB probing
RT-ZA35 Extended cable set for PCB probing

R&S®RT-ZA35

Order number 1333.1905.02

Description

Extended cable set

for R&S®RT-ZVC, PCB probing, 1 current and voltage lead, length: 1 m

RT-ZA36 Solder-in cable set
RT-ZA36 Solder-in cable set

R&S®RT-ZA36

Order number 1333.1911.02

Description

Solder-in cable set

for R&S®RT-ZVC, 4 current and voltage solder-in cables, solder-in pins

RT-ZA37 Extended cable set
RT-ZA37 Extended cable set

R&S®RT-ZA37

Order number 1337.9130.02

Description

Extended cable set

for R&S®RT-ZVC, BNC connector, 1 current and voltage lead, length: 16 cm

R&S®RTE-B1E

Order number 1333.0750.02

Description

Digital extension port for R&S®RT-ZVCxx, included in R&S®RTE-B1

R&S®RTO-B1E
R&S®RTO-B1E

R&S®RTO-B1E

Order number 1333.0738.02

Description

Digital extension port for R&S®RTO2000, recommended for R&S®RT-ZVC02 and R&S®RT-ZVC04 hardware

R&S®RT-ZVC - videos

Introduction to IoT power consumption measurement
Introduction to IoT power consumption measurement

This video demonstrates how to perform power consumption measurements on IoT devices with the R&S RT-ZVC multi-channel power probe.

More details

Evaluating IoT activity phase energy consumption
Evaluating IoT activity phase energy consumption

This video demonstrates how to analyze the energy consumption of the activity phase of an IoT device with the R&S RT-ZVC multi-channel power probe and the R&S RTO2000 oscilloscope.

More details

Richiedi informazioni

Hai qualche domanda o ti servono maggiori informazioni? Compila questo modulo e ti risponderemo al più presto.

Autorizzazione al marketing

Desidero ricevere informazioni da Rohde & Schwarz tramite

Cosa significa nello specifico?

Accetto che ROHDE & SCHWARZ GmbH & Co. KG e l’entità ROHDE & SCHWARZ o l’azienda controllata riportata nelle note legali di questo sito web, potrà contattarmi tramite il canale prescelto (e-mail o posta) per scopi di marketing e pubblicità (ad es., informazioni su offerte speciali e sconti) in relazione a, in via non limitativa, prodotti e soluzioni del settore di collaudo e misurazione, comunicazioni sicure, monitoraggio e collaudo di rete, trasmissione, media e sicurezza informatica.

I tuoi diritti

La presente dichiarazione di consenso può essere revocata in qualsiasi momento inviando una e-mail con oggetto “Annulla iscrizione" all’indirizzo news@rohde-schwarz.com. In più, in ciascuna e-mail pubblicitaria inviata sarà allegato un link per annullare l’iscrizione. Nella ”Dichiarazione di riservatezza” vengono definiti ulteriori dettagli sull’utilizzo dei dati personali e sulla procedura di ritiro.

Grazie.

Il team Rohde & Schwarz

Si è verificato un errore. Riprova più tardi.
Informazioni generali e legali

Prezzo suggerito dal costruttore (MSRP). Il prezzo indicato è IVA esclusa. I prezzi e le offerte sono validi per le sole aziende e non per gli acquisti da parte di consumatori privati.