Promo: What's next? Taking industry leadership or watching from the sidelines?

What's next? Taking industry leadership or watching from the sidelines?

Take the lead with up to 60% off our instruments

R&S®Fsx-k54 EMI measurement application

R&S®FPL1-K54, R&S®FSV-K54, R&S®FSV3-K54 and R&S®FSW-K54

R&S®Fsx-k54 EMI measurement application
Ingrandisci immagine
R&S®Fsx-k54 EMI measurement application
Ingrandisci immagine
R&S®Fsx-k54 EMI measurement application, Screenshot R&S®Fsx-k54 EMI measurement application, Screenshot

Key Facts

  • EMI measurement bandwidths and detectors
  • Limit line library as specified in the latest EMI standards
  • Test automation and reporting for fast and repeatable measurements
  • Transducer factors for antennas, cables, LISNs, etc
  • Support of Elektra EMC software

Detecting and eliminating electromagnetic interference

The EMI precompliance application (K54 option) for Rohde & Schwarz signal and spectrum analyzers is the ideal extension for EMI analysis during product development and to prepare for a smooth product certification process. Typical fields of application include commercial, automotive, avionic and military product developments (CISPR, EN, FCC, DO-160 and MIL-STD-461 standards).

Features & benefits

Conclusive results

  • Detectors in line with CISPR 16-1-1: peak, quasi-peak, CISPR-average, RMS-average
  • 6 dB bandwidth in line with CISPR 16-1-1: 200 Hz, 9 KHz, 120 kHz and 1 MHz
  • 6 dB bandwidth in line with  MIL-STD-461 and DO-160: 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz and 1 MHz
  • Selection of one or more transducer factors to compensate for e.g. antenna factors or cable attenuation
  • Limit lines: More than 170 EMI limit lines based on the latest versions of common EMI standards

Transducer definition (example from R&S®FPL1000)
Ingrandisci immagine

Transducer definition (example from R&S®FPL1000)

Selection of two transducer factors (line impedance stabilization network and related cabling).

Measurement automation

Repeatable and fast measurement thanks to automated test sequence

  • Pretesting: Sweeping of set frequency range with one or more fast detectors (e.g. peak or average) 
  • Identification of critical frequencies: Automatic detection of peaks and limit deviations as well as tabular overview of frequencies found  
  • Final measurement of identified frequencies: Automatic final measurement using detectors that require a longer measuring time (e.g. quasi-peak) and final evaluation based on the set limit line

Measurement automation (example from R&S®FPL1000)
Ingrandisci immagine

Measurement automation (example from R&S®FPL1000)

Two detectors are used for the sweep. The identified maximum values are listed and automatically remeasured. PASS/FAIL status is clearly shown.

In-depth signal analysis

  • Up to 200 001 sweep points for high frequency resolution even with large span/small measurement bandwidths
  • Logarithmic frequency scale for in-depth analysis of low frequencies despite wide frequency range
  • Zero span measurement for analyzing the signal behavior over time of selected frequencies with standard detectors and CISPR detectors
  • AM and FM demodulation with audio output to identify ambient interferers

Zero span measurement (example from R&S®FPL1000)
Ingrandisci immagine

Zero span measurement (example from R&S®FPL1000)

The signal is analyzed over time at 580 kHz. The repetition rate of the interference is 50 Hz (20 ms).

Efficient and fast

  • Limit lines: More than 170 EMI limit lines based on the latest versions of common EMI standards (CISPR/EN, FCC, MIL-STD-461 and DO-160) for fast and accurate configuration of the measurement setup
  • LISN remote control: Simplified test execution by controlling connected Rohde & Schwarz LISNs.
  • Report generation: Output of measurement results  at the push of a button

Limit line selection (example from R&S®FPL1000)
Ingrandisci immagine

Limit line selection (example from R&S®FPL1000)

Limit line selection for electric tools up to 700 W and definition of visibility and trace assignment.

R&S®ELEKTRA EMC test software support

The R&S®ELEKTRA test software controls entire EMC systems and automates measurements of equipment under test (EUT). R&S®ELEKTRA simplifies configuration of test systems and test descriptions in line with common standards. It speeds up test execution and paves the way to quickly generating a comprehensive test report.

Automated EMI measurement with R&S®ELEMI-E
Ingrandisci immagine

Automated EMI measurement with R&S®ELEMI-E

The R&S®ELEMI-E EMI test software, a simplified version of the R&S®ELEKTRA software, is ideal for EMI measurements during development.

Video applicativi

Analisi condotta di preconformità EMI con un analizzatore di spettro R&S®FPL1000

Come studiare le emissioni condotte di una lampada da 230V con l'applicazione di misura EMI. Il sistema di misura comprende l'analizzatore di spettro R&S®FPL1000 equipaggiato con l'opzione R&S®FPL1-K54 e la rete di stabilizzazione R&S®ENV216.

ago 15, 2021

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Autorizzazione al marketing

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.