Promo: What's next? Taking industry leadership or watching from the sidelines?

What's next? Taking industry leadership or watching from the sidelines?

Take the lead with up to 60% off our instruments

100BASE-T1/BroadR-Reach® ethernet software

Compliance test

100BASE-T1/BroadR-Reach® ethernet software
Ingrandisci immagine
100BASE-T1/BroadR-Reach® ethernet software
Ingrandisci immagine
100BASE-T1/BroadR-Reach® Ethernet software, Software 100BASE-T1/BroadR-Reach® Ethernet software, Application Image

Key Facts

  • Test solution of BroadR-Reach® Ethernet interfaces
  • Predefined, automated test steps
  • Step-by-step wizard for user guidance
  • Clear and comprehensive test documentation
  • Test report documents results including numerical data or screen shots
  • Multi-domain icon
  • HD 16 bit

Oscilloscope software

The R&S®RTP-K24 and R&S®RTO-K24 option offers an automated compliance test solution for 100BASE-T1 or BroadR-Reach® Ethernet according to OPEN Alliance TC8 and IEEE 802.3bw compliance test specification. The test wizard guides the user via illustrated step-by-step instructions. Automatic test sequences allow for a fast test run. A configurable test report documents the test results. The complete Ethernet compliance test solution includes the R&S®RT-ZF8 Test Fixture.

Features & benefits

Includes all relevant tests

Meets OPEN TC8 and IEEE 802.3bw test specifications

The complete test solution covers all mandatory and optional test cases of the OPEN TC8 test specification for ECU compliance testing. The complete solution includes an oscilloscope and a vector network analyzer. For accurate probing, the RT-ZF8 test fixture meets OPEN TC8 fixture validation.

Ingrandisci immagine

Fully automatic or manual tests

The R&S®ScopeSuite has a test wizard for guided steps. The tests used are fully automatic. In addition, single tests can be carried out for efficient debugging. The limit editor lets you individually adjust standard-specific test limits.

Ingrandisci immagine

Guided test steps

Ease-of-use with image-based guided test steps

The Ethernet compliance test is a fully guided test. Detailed, image-based instructions make it easy to correctly connect the oscilloscope and the probes to the test fixture and the device under test. This increases the ease-of-use and reduces potential setup errors.

Ingrandisci immagine

Strong reporting functionality

Clear and comprehensive reporting functionality

The test results are fully documented in a report created by the R&S®ScopeSuite. Depending on the user’s preference, the test report can include numerical result data or oscilloscope screen shots. The available output formats are PDF, DOC and HTML.

Ingrandisci immagine

Complete solution

Test solution includes oscilloscope, VNA, Waveform generator and test fixtures

The compliance test setup includes test cases that need a waveform generator and a network analyzer. R&S offers a complete solution with the R&S®RTO-B6 waveform generator and the R&S®ZND Vector Network Analyzer. The R&S®ScopeSuite compliance test software fully supports all instruments for a fully integrated compliance test solution.

Ingrandisci immagine

Available models

Available models
Modelli
Min. bandwidth
Description
Base unit

R&S®RTO-K24

Order Number 1329.7483.02

Min. bandwidth
600 MHz
Description
Automated compliance test solution for 100BASE-T1/BroadR-Reach® Ethernet in line with openSIG compliance test specification
Base unit

R&S®RTP-K24

Order Number 1800.6531.02

Min. bandwidth
600 MHz
Description
Automated compliance test solution for 100BASE-T1/BroadR-Reach® Ethernet in line with openSIG compliance test specification
Base unit

R&S®RTO6-K24

Order Number 1801.6941.02

Min. bandwidth
600 MHz
Description
Automated compliance test solution for 100BASE-T1/BroadR-Reach® Ethernet in line with openSIG compliance test specification
Base unit
Specifications
Recommended configuration R&S®RTO-K24 - RTO2004
- RTO-B6 (for tests with distruber)
- RTO-B4
- RT-ZF8 Ethernet test fixture
- RT-ZF3 Frequency converter
- 2 x SMA cables
- ZND or ZNB Network Analyser (option K5 or K6 required)
- Shielding chamber
R&S®RTP-K24 - RTP044
- RTP-B6 (for tests with distruber)
- RT-ZF8 Ethernet test fixture
- RT-ZF3 Frequency converter
- 2 x SMA cables
- ZND or ZNB Network Analyser (option K5 or K6 required)
- Shielding chamber

Available options

Software options
Product
Descrizione

Order Number 1329.7419.02

Descrizione

High definition mode.

Order Number 1337.8856.02

Descrizione

High definition mode

Extras
Product
Descrizione
R&S®RT-ZF2

Order Number 1317.5522.02

Descrizione

Test fixture for 10/100/1000BASE-T, 10G-BaseT and BroadR-Reach Ethernet

Supported by R&S®RTO-K22, R&S®RTO-K23 and R&S®RTO-K24 Ethernet compliance test options.

R&S®RT-ZF3

Order Number 5025.0670.02

Descrizione

Frequency converter

for 100BASE-T1/BroadR-Reach compliance test

R&S®RT-ZF7A

Order Number 1801.4126.02

Descrizione

SMA Adapter

High precision adapter board from automotive connector to SMA

R&S®RT-ZF8

Order Number 1801.3694.02

Descrizione

Automotive Ethernet Compliance Fixture

Test fixture for 100BASE-T1 and 1000BASE-T1 compliance testing according to IEEE and OPEN TC8

R&S®RTO-B4

Order Number 1304.8305.02

Descrizione

OCXO 10 MHz

Increase time base accuracy to ±0.02 ppm after calibration

Order Number 1329.7054.02

Descrizione

Arbitrary waveform generator

Add 2-channel 500 MSample/s waveform generator and 8-channel pattern generator

R&S®ZND-K5

Order Number 1328.5312.02

Descrizione

Full test set, Base Unit, bidirectional, 4.5GHz

Order Number 1410.4609.02

Descrizione

Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Autorizzazione al marketing

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.