R&S®ZVA-Zxxx millimeterwave converters

Network analysis up to 110 GHz

R&S®ZVA-Zxxx millimeterwave converters
Ingrandisci immagine
R&S®ZVA-Zxxx millimeterwave converters
Ingrandisci immagine
R&S®ZVA-Zxxx millimeterwave converters
Ingrandisci immagine
R&S®ZVA-Zxxx millimeterwave converters
Ingrandisci immagine
R&S®ZVA-Zxxx millimeterwave converters
Ingrandisci immagine
R&S®ZVA-Zxxx millimeterwave converters
Ingrandisci immagine
R&S®ZVA-Zxxx millimeterwave converters, Front view R&S®ZVA-Zxxx millimeterwave converters, Front view R&S®ZVA-Zxxx millimeterwave converters, Side view R&S®ZVA-Zxxx millimeterwave converters, Back view R&S®ZVA-Zxxx millimeterwave converters, Application Image R&S®ZVA-Zxxx millimeterwave converters, 3D

Key Facts

  • Variable output power
  • Electronic power control
  • Automatic parameter setting
  • Convenient handling
  • Multiport and true differential measurements

Millimeterwave measurements in E and W bands

The R&S®ZVA-Zxx millimeter-wave converters can make millimeterwave measurements in the E and W band from 60 to 90GHz and 75 to 110GHz. Rohde & Schwarz converters have a wide dynamic range, are very convenient to operate and enable fast measurements. When combined with the R&S®ZVA, two-port measurements can be performed with a four-port network analyzer and two converters; with no need for an external generator. A two-port network analyzer requires an external generator for LO signals. The R&S®ZNA can have up to four converters connected with no external signal generator.

Features & benefits

Frequency range

  • 60 GHz to 90 GHz (R&S®ZVA-Z90)
  • 75 GHz to 110 GHz (R&S®ZVA-Z110/R&S®ZVA-Z110E)
  • using an R&S®ZVA24/40/50/67 or an R&S®ZNA26/43/50/67 network analyzer

Wide dynamic range

  • R&S®ZVA-Z90: > 100 dB, typ. 115 dB
  • R&S®ZVA-Z110: > 100 dB, typ. 110 dB
  • R&S®ZVA-Z110E: > 95 dB, typ. 110 dB

Variable and electronic output power

typ. +10 dBm (R&S®ZVA-Z90)
typ. +10 dBm (R&S®ZVA-Z110)
typ. up to +2 dBm (R&S®ZVA-110E)
A control screw can reduce power by 40 dB (R&S®ZVA-Z110). The output power can be electronically reduced by 25 dB with the R&S®ZVA-Z110E. The R&S®ZVA-Z110 can reduce it by 70 dB with RF input power variation.

Automatic parameter setting

R&S®ZVA and R&S®ZNA firmware runs the converters with the R&S®ZVA-K8/R&S®ZNA-K8 converter control option. The network analyzer will automatically set the correct parameters based on the selected converter type. The network analyzer also protects converters by limiting output power to the converter coaxial inputs. For each converter band an appropriate calibration is available.

Convenient handling

The converter waveguide connectors are arranged on a bar extending from the converter for convenient usage. The screwed flange joints are easily accessible for calibration and connecting the DUT. The converters can have three or four height-adjustable feet. Three feet make it much easier to align the test port flange. The converters have no fans – a big advantage in particle-sensitive environments.

Multiport and true differential measurements

Multiport devices such as couplers can be analyzed with three or four converters. The setup can use an R&S®ZVA24, R&S®ZVA40, R&S®ZVA50 or R&S®ZVA67 plus an external generator and one converter per test port. The R&S®ZNA26, R&S®ZNA43, R&S®ZNA50 or R&S®ZNA67 enable up to four converters, which can be connected without needing an external signal generator. The R&S®ZVA-Z90/R&S®ZVA-Z110 and the R&S®ZVA-Z110E are ideal for generating true differential signals (true differential mode).

Pulsed measurements

The converters can also be operated in pulsed mode − to characterize pulsed amplifiers. This applies to both measurements versus frequency (average pulse and point-in-pulse) and pulse profile measurements.

Available models

Available models
Modelli
Upper frequency
Test port
Output power (typ.)

R&S®ZVA-Z90

Order Number 1322.3024.02

Upper frequency
90 GHz
Test port
WR12
Output power (typ.)
+10 dBm

R&S®ZVA-Z110

Order Number 1307.7000.02

Upper frequency
110 GHz
Test port
WR10
Output power (typ.)
+10 dBm

R&S®ZVA-Z110E

Order Number 1307.7000.40

Upper frequency
110 GHz
Test port
WR10
Output power (typ.)
-7 dBm

R&S®ZVA-Z110E

Order Number 1307.7000.50

Upper frequency
110 GHz
Test port
WR10
Output power (typ.)
-1 dBm

Available options

Waveguide calibration kits
Product
Descrizione

Order Number 1307.7700.10

Descrizione

Waveguide calibration kit WR12, 60 GHz to 90 GHz (without sliding match)

Order Number 1307.7700.11

Descrizione

Waveguide calibration kit WR12, 60 GHz to 90 GHz (with sliding match)

Order Number 1307.7100.10

Descrizione

Waveguide calibration kit WR10, 75 GHz to 110 GHz (without sliding match)

Order Number 1307.7100.11

Descrizione

Waveguide calibration kit WR10, 75 GHz to 110 GHz (with sliding match)

General analysis
Product
Descrizione

Order Number 1332.5388.02

Descrizione

Converter Control Software

(for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx)

Order Number 1307.7022.02

Descrizione

 Freq. converter control

(for R&S®ZVA24/40/50/67);

General accessories
Product
Descrizione
R&S®ZV-Z1118

Order Number 1314.5373.00

Descrizione

Adapter SMA m/m angle

0 Hz to 18 GHz

R&S®ZV-Z1218

Order Number 1314.5380.00

Descrizione

Adapter SMA m/f angle

0 Hz to 18 GHz

R&S®ZV-Z1227

Order Number 1307.0886.02

Descrizione

2-way Wilkinson power divider

4 GHz to 27 GHz

R&S®ZVAB-B44

Order Number 1302.5544.02

Descrizione

USB-to-IEC/IEEE adapter

(for control of external devices via IEC/IEEE bus)

R&S®ZCAK

Order Number 1323.7746.24

Descrizione

Adapter kit

including a power divider and two right angle SMA (m/m) adapters (required if R&S®ZVA24 var. 28 or R&S®ZVA40 var. 48 (VNAs with four sources) is used)

R&S®ZCAK

Order Number 1323.7746.50

Descrizione

Adapter kit

including four 1.85 mm (f) to 2.92 mm (m) adapters and four 1.85 mm (m) to 2.92 mm (f) adapters (required if R&S®ZVA50 is used)

R&S®ZCAK

Order Number 1323.7746.67

Descrizione

Adapter kit

including a power divider, two right angle SMA (m/m) adapters, three 1.85 mm (f) to 2.92 mm (m) adapters and four 1.85 mm (m) to 2.92 mm (f) adapters (required if R&S®ZVA67 is used)

Wrenches
Product
Descrizione
R&S®ZV-Z1000

Order Number 1314.5467.02

Descrizione

Torque wrench for waveguide flange screws

R&S®ZCAW

Order Number 1175.1960.00

Descrizione

Angled wrench for waveguide flange screws

R&S®ZCTW

Order Number 1175.2014.02

Descrizione

Torque wrench for waveguide flange screws

R&S®ZCTW

Order Number 1175.2014.03

Descrizione

Torque wrench for waveguide flange screws

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Autorizzazione al marketing

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.