Electronic Design testing – get in touch with the R&S®MXO 5

Electronic design

Get in touch with the R&S®MXO 5

Soluzioni di misura e collaudo che soddisfano le esigenze dei progettisti di circuiti elettronici

Il mondo di oggi è caratterizzato dall'evoluzione continua delle tecnologie e dall'emergere di nuove tendenze in ambito industriale ed economico, come IoT, Industria 4.0 e sostenibilità ambientale, oltre che dai fondamentali cambiamenti indotti nello stile di vita personale, come e-health, e-mobility, case intelligenti, città intelligenti e social media. Tutte queste tendenze creano una forte domanda per una nuova generazione di dispositivi elettronici, che devono rispondere a sofisticati requisiti di indossabilità, mobilità, connettività, prestazioni, efficienza energetica, robustezza e grande velocità di trasmissione dei dati.

La conseguenza diretta di questa tendenze è che ai progettisti elettronici viene richiesto di affrontare sfide sempre più complesse nello sviluppo di schede integrate con architetture innovative. La nostra offerta completa comprende numerose soluzioni di misura, che vanno dai classici strumenti da laboratorio fino agli strumenti portatili e che permettono di affrontare con successo svariate applicazioni pratiche

  • Progettazione e test di circuiti analogici / digitali
  • Bus digitali e interfacce standard
  • Elettronica di potenza
  • CATV / DOCSIS

Le nostre soluzioni

Test di progetti digitali

Scegliete fra la nostra ampia gamma di strumenti di misura per verificare l'integrità dei segnali e delle linee di alimentazione, controllare il funzionamento delle interfacce standard e dei bus digitali, creare segnali di stimolo e analizzare segnali analogici/digitali, identificare e prevenire le interferenze elettromagnetiche, oppure ancora progettare convertitori di dati.

Maggiori informazioni

Test delle interfacce digitali ad alta velocità

Le interfacce digitali ad alta velocità sono al centro di tutte le progettazioni elettroniche. L’aumento della velocità dei dati e la crescita di densità di integrazione pongono nuove sfide da affrontare nei progetti a livello di circuito integrato, circuito elettrico e sistema completo.

Maggiori informazioni

Elettronica di potenza

Gestite tutti i tipi di test di sull'elettronica di potenza con le nostre soluzioni per circuiti integrati e sistemi elettronici di potenza integrati, azionamenti e circuiti di pilotaggio per l'illuminazione.

Maggiori informazioni

CATV / DOCSIS

Collaudo completo di sistemi di terminazione per modem di reti via cavo (CMTS) DOCSIS 3.1, amplificatori per reti via cavo, laser, componenti e modem per reti via cavo.

Maggiori informazioni

Knowledge+

Experience the uniquely personalized, high-quality content from the whole Rohde & Schwarz ecosystem - all in a single place. Discover now our knowledge tailored for your needs.

Video center

Get access to interesting videos and webinars about solutions, applications and products.

More information

Download Center

Search the Rohde & Schwarz download center for brochures, datasheets, technical papers, manuals, firmware, software, drivers, and more.

More information

The Rohde & Schwarz Technology Academy

You’re in great hands
Practical knowledge. Industry insight. Real experts. Only with the Rohde & Schwarz Technology Academy.

More information

Rohde & Schwarz at Embedded-world 2024 in Nuremberg

Rohde & Schwarz at embedded world 2024 in Nuremberg

Test & measurement for embedded systems

Solving complex test and measurement challenges requires innovative solutions from a reliable partner.

Join us at our booth in hall 4 I booth 218 from April 9 to April 11, 2024.

FAQs

What is design verification testing?

Verification of a device means checking that the performance of the device matches the expectations both during development and once development is complete. These expectations can be set internally by the organization commissioning the device, or externally by standards also available to other device developers.
For signal processing devices, the increasing complexity and speed of the device, and the reductions in signal levels together make verification ever more complex. Verification involves ensuring that signal values and parameters always remain within acceptable limits under a wide range of conditions.

What is electronics testing?

Electronics testing means checking that a circuit using semi-conductors is performing correctly. While electronics testing includes fundamental properties such as voltage, current, resistance, conductance and capacitance, almost certainly the properties of the signals transmitted by the circuit will be the major reason for testing. Measurements on signal integrity (quality) such as noise or distortion, or out of the stipulated frequency band do not require demodulation. If the data transmitted by the signal shall be tested to check whether the content is correct, demodulation functions for the appropriate data communication standard are required. The expected results of electronic testing depend on the stage in the life cycle of the device under test (DUT). During development, accurate measurements resulting in values to check against the specification are required. During production, high speed testing with a pass/fail result will meet the test requirements.

What is electronic testing used to test?

So long as “electronic” is taken to mean any circuit using semi-conductors to manipulate electrons, “electronic testing” is used to test any properties of the circuit that can be measured; almost entirely electrical properties, which can be measured at various levels. At the fundamental level, properties such as voltage, current, resistance, conductance and capacitance, can be measured using a multimeter. At the higher level of the signals transmitted by the circuit, measurements on signal integrity (quality) such as noise or distortion, or out of the stipulated frequency band, are measured with respect to frequency using signal and spectrum analysis, and with respect to time with oscilloscope functions. If the data transmitted by the signal shall be tested to check whether the content is correct, demodulation functions for the appropriate data communication standard are required.

What is signal and power integrity?

In electronics, integrity is whether the expected performance and characteristics of the signal processing from input signal to output signal are being met. Signal integrity refers to the quality of the signal, whether the signal waveform is as anticipated, and the degree to which the waveform is deformed by noise, jitter, and distortion. Power integrity refers to whether the anticipated voltage and current levels are present at all times at the selected test location in the circuit, and parameters such as unplanned variations in level, and planned speed of change in level. Integrity is inevitably associated with testing, as the degree of integrity can only demonstrated by taking measurements and comparing the results to the specification. Poor signal or power integrity results in reduced performance and data transmission errors.

Iscrivetevi alla nostra newsletter

Iscrivetevi alla nostra newsletter

Restate aggiornati sulle tendenze in arrivo e sulle applicazioni più recenti.