R&S®TS-PSC4 System Controller

Intel Pentium M microprocessor, 1.6 GHz with 1 MB L2 cache, passive cooling

• 400 MHz processor system bus
• 512MB DDR333 RAM
• HDD mounting
• 1 MB FLASH for BIOS

8280182801DB I/O Controller Hub providing the following functions:

• integrated LAN controller
• IDE controller Ultra ATA/100/66/33
• USB 2.0 host interface with up to four USB ports available
• Up to Four UART with 16C550 compatible RS232 ports.

PS/2 is an option, a front panel plus module with a Super IO can be installed for keyboard and mouse legacy support. The VGA port is integrated in the 855GME and supports dual dependent video displays, providing 2D/3D graphics accelerator, up to 2048x1536x16/60Hz or 1280x1024x24/85Hz analog and digital output.

• Ethernet: Two RJ-45 with integrated LED·s (ACT, SPEED)
• VGA: CRT 15-pin D-Sub SVGA connector
• USB: Two 4-pin connectors
• COM1/2: Two 9-pin D-Sub (RS232)
• Keyb/Mouse: One PS/2 connector (optional module and front panel)
• LED·s: Thermal, Watchdog or both general purpose
• Reset: Reset button, guarded

• Two IDE male connectors 2-row, one 40pin/2.54mm and one 44 pin/2mm for onboard 2.5 HDD (primary port)
• In case of a installed PS/2 module a Floppy disk connector is supplied (as standard 40 pin with the CompactFlash version or as high density connector with the onboard HDD version; adapter cable available)
• Fan power supply connector (not used with default passive cooling)

The Rear I/O versions support:

• 32-bit/33 MHz CompactPCI interface
• Two USB ports
• One Ethernet port
• Two COM ports (TTL level)
• CRT VGA port
• EIDE port (primary)

• PICMG 2.0 Rev. 3.0 compatible, 32bit / 33MHz System master
• 5V VI/O (3.3V on request), 7 Req/Gnt & clock lines
• No PCI bridge used, bus 0 connected to CompactPCI
• Version with rear I/O on J2

• Dimensions: 100 mm x 160 mm, 8 HP
• Weight: 313 g
• Jumperless design

• Phoenix BIOS with QuickBoot, QuietBoot, BootBlock, MultiBoot III, LAN-boot capability for diskless systems, Boot from USB floppy, BIOS boot support for USB keyboards, Software enable/disable function for the rear I/O, Ethernet, Plug and play capability, BIOS parameters are saved in the EEPROM and PC Health Monitoring
• Board identification number accessible via EEPROM
• Support for Windows 2000, Windows XP Pro, Linux, VxWorks, (QNX on request)

+5 V/16,9 W, +3.3 V/5,6 W, max. 22,5 W at 1.6 GHz

• Operating temperature: 0 °C to +60 °C standard
• Storage temperature: -55 °C to +85 °C
• Operating humidity: 0 % to 93 % RH at 40 °C, non-condensing