6 결과
Carolin Tröster 1GP78 점점 더 많은 모바일 무선 네트워크가 CPRI와 같이 표준화된 전송 프로토콜을 사용하는 디지털 인터페이스를 통해 기지국 본체로 연결하는 원격 RE(Radio Equipment)를 구현하고 있습니다. 로데슈바르즈는 RE 기기 테스트를 지원하는 R&S®EX-IQ-BOX [모델 K04] 기반의 완전한 테스트 솔루션을 제공합니다. 이 핵심 구성 요소는 CPRI 데이터 전송을 사용하여 로데슈바르즈 테스트 장비를 테스트 RE에 연결하는 데 사용하는 디지털 인터페이스 모듈로 사용자 구성이 가능합니다. 이 애플리케이션 노트는 원격 라디오 헤드를 성공적으로 테스트하는 데 필요한 기기 설정 및 구성에 대해 자세히 설명합니다. LTE, CPRI, RE, REC, breakout board,
1MA187 Multiple input multiple output (MIMO) technology is an integral part of 3GPP E-UTRA long term evolution (LTE). As part of MIMO, beamforming is also used in LTE. This application note provides a brief summary of the transmission modes (TM) in LTE and describes the beamforming measurements for base stations (BS) and user equipment (UE). The T&M options using various Rohde & Schwarz instruments
O.Gerlach 1MA028 IQWizard는 FSx Spectrum Analyzer 또는 ESx Receiver를 사용하여 다양한 형식의 IQ 신호 포맷을 로드하고 IQ 신호를 측정하는 툴입니다. 메모리에서 획득한 IQ 데이터는 다양한 형식으로 저장하거나 WinIQSIM™ 또는 WinIQSIM2™를 사용하여 R&S® 벡터 신호 발생기로 전송할 수 있습니다. IQ, I/Q, Fileformat, Trace, TCP/IP, TCP, IP, IQWizard, Wizard, WinIQSIM, FSIQ, FSP, FSU, FSQ, FSL, FSG, FSV, FSVR, FSW, FSUP, ESPI, ESU, FSMR, FSIQ, FSIQ-B70, ETL, ZVL, PR100, SMU, SMU200A, SMW, SMW200A
Carolin Tröster-Schmid 1GP95 칩셋 또는 모듈의 설계 과정에서 FPGA 기반 하드웨어 에뮬레이터를 활용하여 조기에 테스트를 수행할 수 있습니다. 이러한 하드웨어 에뮬레이터는 일반적으로 인위적으로 감소된 속도로 실행되지만 이 기능을 제외한 나머지는 완료된 설계와 동일합니다. 이 애플리케이션 노트에서는 감소된 샘플링 속도에서 적절한 실시간 테스트 신호를 만드는 로데슈바르즈 벡터 신호 발생기를 사용하여 FPGA 기반 하드웨어 에뮬레이터를 테스트하는 방법에 대해 설명합니다. 또한 "Slow I/Q"에 대해 AWGN 신호 발생 및 페이딩 시뮬레이션을 올바르게 대응하는 방법에 대해서도 설명합니다. FPGA, hardware emulators, AWGN, signal generation, fading
1MA168 The R&S EX-IQ-Box serves as a digital baseband interface between a device under test (DUT) and Rohde & Schwarz generators, analyzers and radio communication testers. The DigIConf software supplied with the device controls up to four R&S EX-IQ-Boxes in a test setup and can thus output IQ data for feeding into a DUT while simultaneously receiving IQ output from a DUT.To work together smoothly,
1CM75 This application note explains how to bring a CADENCE system which is attached to an R&S EX-IQ-BOX into service for the first time. The first part of the document shows how to setup an LTE Demo without using a UE design. This setup uses the R&S CMW500 as the downlink transmitter. The emulator receives the downlink via an R&S EX-IQBOX and passes it to an R&S spectrum analyzer (R&S FSx) via a second