R&S®ROMES4 드라이브 테스트 소프트웨어

이동통신 네트워트의 모바일 커버리지 및 QoS 계측

R&S®ROMES4 드라이브 테스트 소프트웨어
라이트박스 열기
R&S®ROMES4 드라이브 테스트 소프트웨어
라이트박스 열기
R&S®ROMES4 Drive Test Software, 스크린샷 R&S®ROMES4 Drive Test Software, 애플리케이션 이미지

주요 사항

  • 5G, Nb-IoT, Cat-M1 등 최신 기술 지원
  • 단말에서 지원하는 측정 기능을 통한 테스트 스마트폰 지원
  • 5G NR, GSM, WCDMA, CDMA2000®, 1xEV-DO, WiMAX™, LTE, NB‑IoT, Cat-M1 및 TETRA
  • 스캐너 고유 기능: ACD, 섹터 및 BTS 위치 추정, NB-IoT/LTE-M, 동적 스펙트럼 공유, ToA(Time of Arrival) 측정
  • RF 및 QoS 테스트를 하나로
  • NB-IoT

모든 이동통신 기술을 위한 네트워크 엔지니어링, 최적화 및 문제 해결

하나의 툴로 RF와 QoS 측정을 수행하여 즉각적인 결과 제공

R&S®ROMES4는 네트워크 엔지니어링, 네트워크 최적화, 문제 해결을 위한 범용 소프트웨어 플랫폼입니다. 테스트 휴대전화 및 드라이브 테스트 스캐너와 결합할 경우 필수적인 커버리지 측정, 간섭 식별, QoS 작업에 모두 활용할 수 있습니다. 테스트 파라미터를 측정 및 표시하는 것 외에도 데이터를 즉시 처리하고 통계를 실시간으로 계산합니다.

기능 및 장점

5G NR 네트워크 테스트

5G NR은 무선 접속 기술을 선도하고 있습니다 

로데슈바르즈의 R&S®TSME6, R&S®TSMA6, R&S®TSMA6B Scanner는 sub 6 GHz 대역에 정의된 전체 SSB 서브캐리어 간격과 전송 사례의 5G NR SSB(Synchronization Signal Block)를 측정할 수 있습니다. FR2 주파수 대역을 지원하려면 최신 R&S®TSME30DC 및 R&S®TSME44DC 다운컨버터를 사용할 수 있습니다. R&S®ROMES4 드라이브 테스트 소프트웨어에는 측정 및 재생 중 전체 평가 작업에 대해 각각의 PCI 및 빔/SSB 표시를 선명하게 유지해주는 새로운 기능과 신호가 있습니다.
Qualcomm 및 삼성 Exynos 칩셋 기반 사용자 장비에 대한 5G NR UE 지원이 추가되어 사용 가능한 5G NR 스캐너 측정을 완벽히 보완합니다. 5G NR UE가 지원됨에 따라 초기 셀 획득용 메트릭스, RSRP 및 RSRQ에 대한 계층 1 측정, PDSCH 및 PUSCH 처리량, MCS, RB 등에 대한 계층 2, RACH 절차 세부정보, LTE-NR EN-DC 시그널링, 애플리케이션 계층을 비롯한 5G 관련 LTE 정보와 5G 전용 NR 지원 셀 정보를 제공합니다.

라이트박스 열기

사설 5G 네트워크 테스트

R&S®ROMES4에 스캐너와 Quectel 기반 산업 모듈을 결합한 시스템은 사설 5G 네트워크를 테스트할 수 있는 완벽한 솔루션입니다

사설 5G 네트워크를 구축할 때에는 설치 및 유지관리 테스트를 실시하여 5G 네트워크로 연결된 기기(예: 로봇)의 정상 작동을 보장하는 것이 중요합니다. 로데슈바르즈가 제공하는 휴대형 사설 네트워크 테스트 솔루션은 R&S®ROMES4 소프트웨어(PC 또는 R&S®TSMA6B Scanner에서 실행)와 변조하지 않은 Quectel RM500Q 상용 모듈로 구성되어 있습니다. 이 솔루션은 사설 5G 네트워크의 과제에 완벽히 대응합니다. Quectel RM500Q 모듈은 산업 환경(예: 로봇을 연결한 상태)에서 실제 기기 성능을 정확히 모방합니다. 로데슈바르즈 테스트 솔루션은 ping, 상호작용, iperf3와 같은 다양한 테스트를 지원하여 사설 5G 네트워크 성능을 테스트 및 파악할 수 있습니다.

라이트박스 열기

TETRA

스캐너와 핸드셋을 이용한 TETRA 네트워크 평가

R&S®ROMES4와 네트워크 문제 분석기를 결합하면 TETRA 네트워크의 품질을 측정하고 문제 지점을 쉽게 탐지할 수 있는 완전한 툴 체인이 됩니다. 이 솔루션은 TETRA용 R&S®TSMx Scanner뿐만 아니라 QoS 측정을 위한 TETRA 핸드셋, Sepura SC20과 같은 음성 품질 분석을 지원합니다. 모든 장비를 소형 백팩에 휴대하고 태블릿을 통해 제어할 수 있어 쉽고 유연한 측정이 가능합니다.

 TETRA 측정 시스템
라이트박스 열기

TETRA 측정 시스템

Testing with iPhone

R&S®ROMES4 supports mobile network testing with iPhone 13 and 14.  

R&S®ROMES4 drive test software supports voice and data on-device testing with suitable iPhone 13 and 14 devices. On device testing is possible through the application called ROMES Probe, which can be found on the AppStore. R&S®ROMES4 controls the app, enables campaign definition on the controlling PC and provides testing capabilities of the true user experience. Voice and data testing – HTTP DL/UL and Ping - are currently possible, in addition to the existing manual functions for locking the RAT and frequency band on the device itself. R&S®ROMES4 and ROMES Probe combination provides extensive measurement capabilities, such as full Qualcomm chipset logging support, UL and DL Layer 1 and Layer 3 insights, as well as insights into the Mobility Procedures.  

ROMES Probe Application
라이트박스 열기

ROMES Probe Application

BTS 위치 추정

스캐너 측정을 기반으로 기지국의 위치를 자동으로 식별합니다.

R&S®ROMES4는 R&S®TSMx Scanner와 결합하여 드라이브 테스트 시 섹터의 위치와 방위를 추정할 수 있습니다. 5G, LTE, WCDMA, CDMA2000,1xEVDO, Wimax, TETRA 및 NB-IoT 기지국을 지원합니다. 네트워크 사업자는 간섭 또는 Co-Siting 요구사항이 있는 경우 다른 네트워크에서 기지국의 위치를 식별할 수 있습니다. 또한 경쟁업체의 네트워크 구현 정보까지 파악할 수 있습니다.

R&S®ROMES4와 R&S®TSMA6 Scanner를 결합한 모습
라이트박스 열기

R&S®ROMES4와 R&S®TSMA6 Scanner를 결합한 모습

ACD(Automatic Channel Detection)

스캐너 사용 시 셋업 시간 단축 및 재주행 감소

R&S®TSMx Drive Test Scanner는 자동 채널 탐지 기능을 사용하여 지정 대역 내 활성 채널을 자동으로 탐지할 수 있습니다. 5G NR, GSM, LTE, LTE-M, UMTS, CDMA2000®/1xEV-DO 및 NB-IoT 네트워크가 지원됩니다. 측정 시스템이 새 채널을 동적으로 식별하여 주행 시 해당 채널을 작업 영역에 추가합니다. 이는 다른 무선 통신 표준에 따라 채널 주파수와 채널 대역폭이 자주 변경되는 공유 스펙트럼에 배포된 네트워크와 특히 관련이 있습니다

자동 채널 감지 기능을 실행한 R&S®ROMES4
라이트박스 열기

자동 채널 감지 기능을 실행한 R&S®ROMES4

다양한 측정 기기

상용화 이전 단계 장치에서도 첨단 기능 테스트 수행 가능

R&S®ROMES4는 모바일 측정을 위한 Qualcomm 및 Exynos 칩셋 기반 장치를 지원합니다. 상용화된 장치와 상용화 이전 상태의 장치를 R&S®ROMES4에 연결하여 다양한 데이터 작업을 수행하면서 완전한 Layer 3 정보를 수신할 수 있습니다. QualiPoc Android의 경우 POLQA 알고리즘(ITU-T P.863)으로 음성 품질도 평가할 수 있으며 Facebook, Dropbox, YouTube와 같은 대표적인 애플리케이션을 테스트 케이스로 사용할 수 있습니다.

R&S®ROMES4에 테스트 스마트폰을 연결한 모습
라이트박스 열기

R&S®ROMES4에 테스트 스마트폰을 연결한 모습

NB-IoT 테스트

스캐너와 기기 NB-IoT 네트워크 테스트 기능이 결합된 R&S®ROMES4

NB-IoT는 경제적 비용과 적은 소비 전력으로 광범위한 실내 커버리지를 보장하는 완전히 새로운 네트워크 계층입니다. R&S®ROMES4와 R&S®TSMx Scanner 및 NB-IoT 테스트-기기를 결합하면 엔지니어링 및 네트워크 최적화를 위한 완전한 RF 및 QoS 테스트 기능을 제공할 수 있습니다. QualComm 및 HiSilicon Neul 기반 기기를 지원합니다. 상세한 트레이스 및 시각화 기능으로 장치 및 네트워크와의 상호 작용을 완전히 제어할 수 있습니다.

R&S®ROMES4 NB-IoT Scanner 화면
라이트박스 열기

R&S®ROMES4 NB-IoT Scanner 화면

네트워크 문제 분석기

네트워크 문제 분석기는 드라이브 테스트 데이터를 자동으로 분석하여 네트워크 내 문제 지점을 식별합니다.

NPA(Network Problem Analyzer)는 네트워크 최적화에 가장 적합합니다. NPA는 R&S®ROMES4 및 QualiPoc 측정 데이터를 사후 처리할 수 있는 툴입니다. NPA는 여러 개의 파일을 처리하고 불충분한 커버리지, 강한 간섭과 같은 RF 문제나 낮은 처리량, 통화 끊김과 같은 서비스 문제를 확인할 수 있습니다. NPA는 NB-IoT, LTE-M(eMTC)과 같은 첨단 기술을 지원합니다

R&S®ROMES4 Network Problem Analyzer
라이트박스 열기

R&S®ROMES4 Network Problem Analyzer

제품 동영상

Complete mobile network engineering, optimization&troubleshooting solution

Complete mobile network engineering, optimization & troubleshooting solution

R&S®ROMES4는 네트워크 엔지니어링, 최적화, 문제 해결을 위한 범용 소프트웨어 플랫폼입니다.

Synchronization of 5G TDD networks - demo

5G TDD 네트워크 동기화 - 데모

이 동영상에서는 5G 네트워크 동기화를 측정하는 방법에 대해 설명하고, R&S®ROMES4 실시간 분석 소프트웨어를 사용해 상용 5G 네트워크에서 실시한 측정 결과에 대해 논의합니다.

사용 사례

NB-IoT

NB-IoT 네트워크 테스트 방법과 이를 위한 측정 솔루션에 대해 자세히 알아보시기 바랍니다.

내용 보기

4x4 MIMO

4x4 MIMO 기능을 이용한 네트워크 용량 증대와 이를 지원하는 측정 솔루션에 대해 자세히 알아보시기 바랍니다.

내용 보기

모바일 네트워크 테스트 방법

오늘날의 모바일 네트워크 구조 및 과제에 대해 자세히 알아보시기 바랍니다.

내용 보기

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.