R&S®ELEKTRA 테스트 소프트웨어

R&S®ELEKTRA 테스트 소프트웨어
라이트박스 열기
R&S®ELEKTRA 테스트 소프트웨어
라이트박스 열기
R&S®ELEKTRA 테스트 소프트웨어
라이트박스 열기
R&S®ELEKTRA Test Software, 스크린샷 R&S®ELEKTRA Test Software, 애플리케이션 이미지 R&S®ELEKTRA Test Software, 전면 위

주요 사항

  • 상호 대화식 및 자동 EMC 측정을 위한 직관적인 설계
  • 사전 정의된 템플릿으로 대부분의 공통 EMC 표준 지원
  • EUT별 테스트 계획 및 성적서 작성
  • 효율적인 결과 분석 및 리포팅
  • 사전적합성 검증용 Emission 측정을 위해 간소화된 전용 버전(ELEMI-E)

Electromagnetic Emission과 Immunity 시험을 빠르고 안정적으로 측정

R&S®ELEKTRA Test Software는 EMC 측정 시스템을 제어하며, 방출(EMI) 및 면역(EMS) 인증 대상 장비의 측정을 자동화하는 솔루션입니다. R&S®ELEKTRA에서는 공통 표준에 따라 테스트 시스템 구성 및 테스트 설명을 간소화할 수 있습니다. 따라서 테스트를 더욱 빠르게 실행하고 포괄적인 테스트 리포트를 빠르게 생성할 수 있습니다.

기능 및 장점

직관적 사용자 인터페이스

R&S®ELEKTRA Test Software에는 효율적으로 조작할 수 있도록 간결하게 설계된 최신 사용자 인터페이스가 탑재되어 있습니다

이 사용자 인터페이스는 한 페이지로 설계되어 사용자가 여러 창을 탐색하지 않아도 필요한 설정과 선택 항목에 모두 액세스할 수 있습니다. 키워드 검색 기능과 자주 찾는 항목을 대시보드에 고정한 다음 즉시 액세스할 수 있는 기능은 테스트 효율성을 높여줍니다.
측정이 실행되는 동안 동시 조작으로 다음 단계를 준비할 수 있습니다.

대시보드
라이트박스 열기

대시보드

빠르게 시작하기

즉시 실행 가능 테스트 템플릿의 라이브러리

R&S ELEKTRA에는 공통 EMC 측정 시 즉시 실행 가능한 테스트가 포함된 대용량 테스트 템플릿 라이브러리가 기본 제공됩니다. 기기를 연결하고 각 하드웨어를 구성한 다음 바로 테스트를 시작할 수 있습니다.

테스트 템플릿 라이브러리
라이트박스 열기

테스트 템플릿 라이브러리

테스트 계획 편집기 및 EUT 요약 보고서

테스트 전 EUT에 대한 테스트 계획을 정의하고 전체 테스트에 대한 요약 보고서를 즉시 작성합니다

테스트 계획을 사용하여 EUT에 실행하려는 모든 테스트를 관리할 수 있습니다. 실행, 상태, 결정을 추적하고 모든 테스트에 대한 보고서를 자동으로 작성합니다.

Test Plan 편집기
라이트박스 열기

Test Plan 편집기

테스트 수행 속도 증가

측정 자동화

EMI 및 EMS 측정을 자동화하십시오. 수동 작업 없이 R&S®ELEKTRA에서 결과를 평가 및 보고할 수 있습니다.

테스트 결과 리포트
라이트박스 열기

테스트 결과 리포트

사용 가능한 모델

사용 가능한 모델
모델
측정 타입
애플리케이션
자동화

R&S®ELEMI-E

주문 번호 5601.0030.02

측정 타입
EMI
애플리케이션
사전 적합성 측정
자동화
매뉴얼

R&S®ELEMI-EA

주문 번호 5601.0424.02

측정 타입
EMI
애플리케이션
사전 적합성 측정
자동화
반자동

R&S®ELEMI-EAS

주문 번호 5601.0382.02

측정 타입
EMI
애플리케이션
인증
자동화
자동

R&S®ELEMS-C

주문 번호 5601.0099.02

측정 타입
전도 EMS
애플리케이션
사전 인증/인증
자동화
반자동

R&S®ELEMS-CS

주문 번호 5601.0447.02

측정 타입
EMS
애플리케이션
인증
자동화
자동

R&S®ELEMS-R

주문 번호 5601.0118.02

측정 타입
Radiated EMS
애플리케이션
사전 인증/인증
자동화
반자동

R&S®ELEMS-RS

주문 번호 5601.0360.02

측정 타입
EMS
애플리케이션
인증
자동화
자동

R&S®ELEMS-CRS

주문 번호 5601.0401.02

측정 타입
EMS
애플리케이션
사전 인증/인증
자동화
자동

사용 가능한 옵션

소프트웨어 옵션
산물
설명
R&S®ELEMC-5GS

주문 번호 5601.0276.02

설명

R&S®CMX500용 5G 시그널링

R&S®ELEMC-C345

주문 번호 5601.0576.02

설명

EMS extension for MIL-STD 461, CS103/CS104/CS105

R&S®ELEMC-CELS

주문 번호 5601.0699.02

설명

셀룰러 시그널링 확장

R&S®ELEMC-DEX

주문 번호 5601.0547.02

설명

외부 애플리케이션으로 데이터 교환

R&S®ELEMC-DRV

주문 번호 5601.0230.02

설명

제네릭 드라이버

R&S®ELEMC-EDB

주문 번호 5601.0530.02

설명

Enhanced data base

R&S®ELEMC-OFF9

주문 번호 5601.0599.02

설명

오프라인 프리/포스트 프로세싱용 EMC 기반 SW

R&S®ELEMC-REM

주문 번호 5601.0553.02

설명

EMC extension for remote control interface

R&S®ELEMC-REP

주문 번호 5601.0460.02

설명

사용자정의 RPT를 위한 확장

R&S®ELEMC-TLA

주문 번호 5601.0560.02

설명

EMC test list automation

R&S®ELEMC-WRLS

주문 번호 5601.0701.02

설명

무선 시그널링 확장

R&S®ELEMI-3D

주문 번호 5601.0260.02

설명

3D 평가

R&S®ELEMI-5GFC

주문 번호 5601.0682.02

설명

FCC 규정에 따른 RSE 5G 측정

R&S®ELEMI-A

주문 번호 5601.0053.02

설명

고급 기능 확장

R&S®ELEMI-AS

주문 번호 5601.0518.02

설명

EMI system test software extension package

R&S®ELEMI-MBM

주문 번호 5601.0676.02

설명

EMI ext. multi band MEAS

R&S®ELEMI-OOB

주문 번호 5601.0724.02

설명

ETSI EN300328/ETSI EN301893에 따른 RSE 측정

R&S®ELEMI-RSE

주문 번호 5601.0253.02

설명

방사 스퓨리어스 측정

R&S®ELEMI-S

주문 번호 5601.0076.02

설명

시스템으로 확장

R&S®ELEMS-ABT

주문 번호 5601.0730.02

설명

EMS extension audio breakthrough

R&S®ELEMS-AIM

주문 번호 5601.0582.02

설명

AIM731731 표준용
EMS 파형 관리 소프트웨어

R&S®ELEMS-AMEX

주문 번호 5601.0353.02

설명

자동차 및 군사 표준용 EMS 테스트 소프트웨어

R&S®ELEMS-S

주문 번호 5601.0130.02

설명

EMS system test software for conducted and/or radiated susceptibility

R&S®ELEMS-SCP

주문 번호 5601.0630.02

설명

오실로스코프 드라이버

R&S®ELEMC-ATB

주문 번호 5601.2340.02

설명

EUT test bench control

R&S®ELEKTRA - 소프트웨어를 얼마나 쉽게 사용할 수 있는지 보여드립니다.

Intuitive user interface

애플리케이션 동영상 1:

직관적 사용자 인터페이스

Getting started quickly

애플리케이션 동영상 2:

빠르게 시작하기

Increasing your test throughput

애플리케이션 동영상 3:

테스트 처리량 높이기

R&S®ELEKTRA - training video series

How to get started with R&S®ELEKTRA: Overview

R&S®ELEKTRA overview

What is R&S®ELEKTRA, what is it used for and how does it work in general?

Installing or upgrading R&S®ELEKTRA

R&S®ELEKTRA installing or upgrading

A quick tour around the graphical instruments of the software.

Launching R&S®ELEKTRA

R&S®ELEKTRA launching software

How to launch the R&S®ELEKTRA software and use the configuration wizard to load preconsidered test information and setups.

Explanation of this principle and how it is implemented in the test process of R&S®ELEKTRA.

R&S®ELEKTRA 4 layers principle

Explanation of this principle and how it is implemented in the test process of R&S®ELEKTRA.

R&S®ELEKTRA GUI tour

R&S®ELEKTRA GUI tour

A quick tour around the graphical instruments of the software.

R&S®ELEKTRA executing a test

R&S®ELEKTRA executing a test

Overview of how to execute a test in R&S®ELEKTRA.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.