R&S®NRPM OTA 파워 측정 솔루션

R&S®NRPM OTA 파워 측정 솔루션
라이트박스 열기
R&S®NRPM OTA 파워 측정 솔루션
라이트박스 열기
R&S®NRPM OTA 파워 측정 솔루션
라이트박스 열기
R&S®NRPM OTA 파워 측정 솔루션
라이트박스 열기
R&S®NRPM OTA 파워 측정 솔루션
라이트박스 열기
R&S®NRPM OTA 파워 측정 솔루션
라이트박스 열기
R&S®NRPM OTA 파워 측정 솔루션
라이트박스 열기
R&S®NRPM OTA Power Measurement Solution, 운용 이미지 R&S®NRPM OTA Power Measurement Solution, 운용 이미지 R&S®NRPM OTA Power Measurement Solution, 정면 R&S®NRPM OTA Power Measurement Solution, 정면 R&S®NRPM OTA Power Measurement Solution, 프론트 하이 R&S®NRPM OTA Power Measurement Solution, 정면 R&S®NRPM OTA Power Measurement Solution, 정면

주요 사항

  • 18GHz ~ 90GHz의 주파수 대역
  • 매우 빠른 RX 리스트 모드
  • 5G, WLAN IEEE 802.11ad, IEEE 802.11ay 및 자동차 레이더용
  • 교정 완료된 통합 다이오드 감지기 탑재 안테나 모듈
  • 고객 요구 사항에 따라 확장 가능

매우 정확한 OTA(Over-the-Air) 전력 측정을 위해 설계

R&S®NRPM은 벤치마크 작업 또는 무반향실을 위한 완전히 교정된 개별 확장형 OTA 파워 측정 솔루션입니다. 이 솔루션은 18 GHz ~ 90 GHz 주파수 대역을 지원하여 5G, WLAN IEEE 802.11ad, IEEE 802.11ay에서 OTA(Over-the-Air) 빔포밍 검증과 송신 안테나 출력의 교정에 적합합니다.

기능 및 장점

명확한 시스템 불확도

지정 시스템 불확도의 완전 교정 OTA 전력 측정 시스템

기존 OTA 시스템에서 측정 불확도가 발생하는 이유는 주파수에 따라 달라지는 안테나 게인 및 안테나 패턴과 RF 구성부품이 일치하지 않기 때문입니다. R&S®NRPM 솔루션은 추가적인 RF 구성부품이 필요하지 않기 때문에 안테나에서 직접 전력을 측정하여 이 문제가 발생하지 않습니다. 뿐만 아니라 안테나 게인, 안테나 패턴, 다이오드 탐지기가 함께 교정됩니다. 사용자가 복잡한 시스템 교정을 수행하지 않아도 됩니다.

OTA 전력 측정 시스템
라이트박스 열기

OTA 전력 측정 시스템

저반사 안테나 모듈

작은 레이더 단면적으로 교란 반사 방지

R&S®NRPM-A90 및 -A90D 안테나 모듈은 일반적으로 –26dB/sm의 매우 낮은 레이더 단면적으로 일반적 혼 안테나값보다 약 15dB/sm가 낮습니다. 반사의 가상적 부재로 인해 차폐 환경에 적합합니다.

R&S®NRPM-A90 Low-Reflection Antenna Module
라이트박스 열기

R&S®NRPM-A90 Low-Reflection Antenna Module

매우 높은 감도

R&S®NRPM OTA Power Measurement Solution은 안테나에 직접 통합된 고감도 다이오드 탐지기를 사용합니다

R&S®NRPM-A90 및 R&S®NRPM-A90D 안테나 모듈은 최저 -76 dBm의 전력을 측정할 수 있습니다. 예를 들어 송신 출력이 -10 dBm인 DUT를 1 m 밖에 배치하고 안테나 모듈에서 수신된 출력을 정밀하게 파악할 수 있습니다.

OTA 전력 측정 솔루션, 벤치탑
라이트박스 열기

OTA 전력 측정 솔루션, 벤치탑

OTA 수신기 테스트를 위한 시스템 교정

DUT 수신기를 테스트하기 위해서는 DUT에서 정확한 OTA 송신 전력을 파악해야 합니다. 이 측정 셋업을 교정하려면 R&S®NRPM-A90 안테나 모듈을 DUT에 배치하여 신호 발생기의 송신 전력을 교정합니다. 교정 작업은 R&S®NRPM-A90/A90D 안테나 모듈을 사용하며 해당 모듈은 나중에 DUT로 교체합니다. DUT의 수신 성능을 정밀하게 탐지합니다.

OTA 수신기 테스트를 위한 시스템 교정
라이트박스 열기

OTA 수신기 테스트를 위한 시스템 교정

TX 빔포밍 검증

빔포밍 기능을 테스트하려면 복수의 R&S®NRPM-A90/A90D Antenna Module이 필요합니다. 안테나 빔이 특정 안테나 모듈 방향을 향한 경우 해당 모듈에 모든 안테나의 최고 출력이 표시됩니다. 수평 평면에서의 빔 스티어링이 정상적으로 작동하는지 여부를 검증하는 데 평면에 배열된 3개 안테나 모듈을 사용합니다. 수직 빔포밍을 테스트하려면 R&S®NRPM-A90/A90D Antenna Module을 2개 이상의 수평 평면에 배열해야 합니다.

TX 빔포밍 검증
라이트박스 열기

TX 빔포밍 검증

사양
R&S®NRPM-A90 Single Polarized Antenna
주파수 범위 18GHz ~ 90GHz
파워 측정 범위(주파수에 따라 다름) 연속 평균 -76dBm ~ -19dBm
트레이스 -63dBm ~ -19dBm
상승/하강 시간 2.2µs
비디오 대역폭 220kHz
측정 불확도
18GHz ~ 24GHz 절대값 0.68dB ~ 0.81dB
상대값 0.05dB ~ 0.09dB
> 24GHz ~ 35GHz 절대값 0.49dB ~ 0.66dB
상대값 0.05dB ~ 0.09dB
> 35GHz ~ 57GHz 절대값 0.50dB ~ 0.72dB
상대값 0.05dB ~ 0.09dB
> 57GHz ~ 71GHz 절대값 0.58dB ~ 0.83dB
상대값 0.05dB ~ 0.09dB
> 71GHz ~ 81GHz 절대값 0.61dB ~ 0.91dB
상대값 0.05dB ~ 0.09dB
> 81GHz ~ 90GHz 절대값 0.69dB ~ 0.97dB
상대값 0.05dB ~ 0.09dB
R&S®NRPM-A90D Dual Polarized Antenna
주파수 범위 18GHz ~ 90GHz
파워 측정 범위(주파수에 따라 다름) 연속 평균 -76dBm ~ -19dBm
트레이스 -63dBm ~ -19dBm
상승/하강 시간 2.2µs
비디오 대역폭 220kHz
측정 불확도(측정 거리 1m)
18GHz ~ 24GHz 절대값 0.73dB ~ 0.85dB
상대값 0.05dB ~ 0.09dB
> 24GHz ~ 35GHz 절대값 0.55dB ~ 0.71dB
상대값 0.05dB ~ 0.09dB
> 35GHz ~ 57GHz 절대값 0.59dB ~ 0.78dB
상대값 0.05dB ~ 0.09dB
> 57GHz ~ 71GHz 절대값 0.68dB ~ 0.90dB
상대값 0.05dB ~ 0.09dB
> 71GHz ~ 81GHz 절대값 0.72dB ~ 0.99dB
상대값 0.05dB ~ 0.09dB
> 81GHz ~ 90GHz 절대값 0.87dB ~ 1.10dB
상대값 0.05dB ~ 0.09dB

사용 가능한 옵션

안테나 모듈
산물
설명
R&S®NRPM-A90

주문 번호 1426.7760.02

설명

단극 인테나 모듈

전력 측정용 통합형 다이오드 탐지기를 탑재한 완전 교정, 저반사, 단극 Vivaldi 안테나.

R&S®NRPM-A90D

주문 번호 1426.7777.02

설명

양극 안테나 모듈

직각으로 정밀 배열된 통합형 다이오드 탐지기를 탑재한 저반사, 단극 Vivaldi 안테나 2개. 이 안테나를 이용하여 양극 방향의 측정이 가능합니다.

센서 모듈
산물
설명
R&S®NRPM3

주문 번호 1425.8563.02

설명

3채널 센서 모듈

R&S®NRPM3N

주문 번호 1425.8592.02

설명

Three Channel LAN Sensor Module

차폐 RF 테스트 박스용 인터페이스
산물
설명
R&S®NRPM-ZD3

주문 번호 1425.8786.02

설명

필터링된 케이블 피드스루

R&S®NRPM-ZKD3

주문 번호 1436.2984.02

설명

Interface cable

벤치탑 작업용 인터페이스
산물
설명
R&S®NRPM-Z3

주문 번호 1426.7602.02

설명

인터페이스 모듈

R&S®NRPM-Z3는 R&S®NRPM3 3채널 센서 모듈에 직접 연결하며 최대 3개의 R&S®NRPM-A90 Antenna Module을 호스팅할 경우 추가 케이블이 필요하지 않습니다.

일반 액세서리
산물
설명
R&S®NRP-ZKU

주문 번호 1419.0658.02

설명

USB-A 인터페이스 케이블, 길이: 0.75 m

R&S®NRP-ZKU

주문 번호 1419.0658.03

설명

USB-A 인터페이스 케이블, 길이: 1.5 m

R&S®NRP-ZKU

주문 번호 1419.0658.04

설명

USB-A 인터페이스 케이블, 길이: 3 m

R&S®NRP-ZKU

주문 번호 1419.0658.05

설명

USB-A 인터페이스 케이블, 길이: 5 m

R&S®NRP-ZK6

주문 번호 1419.0664.02

설명

6폴 인터페이스 케이블, 길이: 1.5m

R&S®NRP-ZK6

주문 번호 1419.0664.03

설명

6폴 인터페이스 케이블, 길이: 3m

R&S®NRP-ZK6

주문 번호 1419.0664.04

설명

6폴 인터페이스 케이블, 길이: 5m

R&S®NRP-Z5

주문 번호 1146.7740.02

설명

USB 센서 허브

R&S®NRP-Z5는 R&S®NRPxxS(N), R&S®NRPxxT(N), R&S®NRPxxA(N) 또는 R&S®NRP-Z 센서를 최대 4개까지 호스팅할 수 있습니다. 전문 트리거 솔루션을 통해, 연결된 모든 센서의 내부 및 외부 트리거 동시 트리거링이 가능합니다.

R&S®NRPM-ZKT

주문 번호 1425.8857.02

설명

트리거 케이블

문서
산물
설명
R&S®DCV-1

주문 번호 0240.2187.06

설명

교정 성적서

R&S®DCV-ZP

주문 번호 1173.6506.02

설명

DCV 출력

Related videos

OTA Power 측정

이 동영상은 OTA(Over-the-Air) Power 측정에 관한 기술 정보를 간략히 소개하고 기존의 Conducted Power 측정과 어떻게 다른지에 대해 설명합니다.

5월 18, 2020

R&S®NRPM 사용 방법

이 동영상은 R&S®NRPM OTA(Over-the-Air) Power 측정 시스템에 대해 간략히 소개합니다.

5월 18, 2020

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.