R&S®Pulse Sequencer

강력한 레이더 시뮬레이션 소프트웨어

R&S®Pulse Sequencer
라이트박스 열기
R&S®Pulse Sequencer
라이트박스 열기
R&S®Pulse Sequencer
라이트박스 열기
R&S®Pulse Sequencer
라이트박스 열기
R&S®Pulse Sequencer
라이트박스 열기
R&S®Pulse Sequencer, screenshot, antenna pattern, 3D scenario preview, chirp modulation on pulse R&S®Pulse Sequencer, screenshot, 2D scenario preview, moving emitter along a trajectory on the map R&S®Pulse Sequencer , screenshot, graphical mode editor with five emitters R&S®Pulse Sequencer, screenshot, triangular chirp MOP and 3D scenario preview 펄스 시퀀서 소프트웨어 소개 동영상

주요 사항

  • 시나리오 생성을 위한 강력한 COTS 레이더 신호 시뮬레이션
  • 정밀 RF 레이더 신호 발생 및 디지털 레이더 신호 발생 
  • 간단한 펄스 트레인부터 AoA(Angle of Arrival)가 포함된 매우 까다로운 방향 탐지 시나리오까지 지원
  • 맵과 복수의 이동 이미터 플랫폼이 포함된 현실적 시나리오
  • DFS(Dynamic Frequency Selection, 동적 주파수 선택) 테스트를 위한 표준 레이더 프로필

시스템을 테스트하여 위협에 대비하십시오. 

레이더 리시버 테스트 엔지니어와 기술 담당자는 R&S®Pulse Sequencer 소프트웨어와 로데슈바르즈 벡터 신호 발생기 또는 소프트웨어만으로 효과적인 레이더 신호 발생 솔루션을 구성할 수 있습니다. 이 솔루션은 비용이 많이 필요한 필드 테스트보다 실험실 테스트를 고려하는 추세에 완벽하게 부합합니다.산업간 협업으로 공동 설계된 이 솔루션은 관련된 최신 레이더 시나리오 Test Case를 모두 지원하며 현실 환경을 반영할 수 있습니다. 이 솔루션은 시판되는 R&S®Pulse Sequencer PC 소프트웨어와 로데슈바르즈 벡터 신호 발생기를 활용합니다.  

기능 및 장점

실제 상황처럼 테스트 가능

현실적 레이더 시나리오

현장에서 안정적 성능을 구현하기 위해서는 연구소에서 현실적 시나리오를 이용하여 레이더 경고 장비를 테스트하는 것이 중요합니다. 로데슈바르즈의 RF 및 디지털 레이더 신호 시뮬레이터는 다음과 같이 매우 중요한 시나리오 요소를 모두 고려하여 상당히 현실적인 시나리오를 제공합니다.

  • 펄스 및 시퀀스
  • 이동하는 플랫폼 및 리시버
  • 궤도 및 맵
  • 안테나 패턴 및 스캔
  • Pulse-on-Pulse 및 인터리브 신호
  • 모드 변화
  • 복수의 동기화된 RF 또는 AoA(Angle of Arrival)를 위한 디지털 채널
  • 5G 신호를 이용하는 간섭 신호

R&S 레이더 시뮬레이터
라이트박스 열기

R&S 레이더 시뮬레이터

로데슈바르즈의 RF 레이더 신호 시뮬레이터는 R&S®Pulse Sequencer 소프트웨어와 R&S®SMW200A Vector Signal Generator로 구성되어 있습니다.

펄스 생성

펄스 및 시퀀스 시뮬레이션

기본 펄스는 모든 레이더 신호의 기본입니다. 생성된 신호의 복잡도는 성분 테스트를 위한 간단한 펄스부터 MOP(Modulation on Pulse), 특수 펄스 형태, 인터펄스 변조 등의 복합적 펄스 시퀀스까지 다양합니다. R&S®SMW200A를 이용하여, Real-time Sequencing, 느린 안테나 스캔 시뮬레이션의 초장시간 재생, 주파수, 위상, 레벨 민첩도와 결합된 수백만 펄스 생성이 가능합니다.

Pulse Sequencer 스크린샷, 펄스 형태 미리보기
라이트박스 열기

Pulse Sequencer 스크린샷, 펄스 형태 미리보기

RF 및 디지털 출력 신호를 위한 레이더 시나리오 생성

리시버 및 이미터가 포함된 일반 레이더 시나리오

다양한 사전정의 안테나 특성도와 스캔 또는 간섭 신호를 이용한 복잡한 멀티모드 레이더 이미터 및 리시버를 포함한 시나리오를 시뮬레이션할 수 있습니다. 각자의 안테나 특성도, 사용자 정의 스캔을 가져와 자체 시나리오를 만드십시오. 시나리오에는 전파 손실 모델이 포함되므로 현실 시나리오에서 발생하는 것과 같은 RF 출력이 제공됩니다. 

Pulse Sequencer 스크린샷
라이트박스 열기

Pulse Sequencer 스크린샷

삼각 처프 펄스 미리보기 및 시간의 경과에 따른 신호 레벨별 3D 시나리오 미리보기

맵 기반 시나리오 생성

맵 지원을 이용한 까다로운 멀티-이미터 전자기 환경 시뮬레이션

R&S®Pulse Sequencer 소프트웨어는 이동 레이더 플랫폼, 이미터와 이동 리시버를 RF 테스트와 디지털 레이더 리시버 테스트를 위해 간편하게 시뮬레이션하는 방법입니다. 개발자는 이 소프트웨어를 사용해 매우 동적인 3D 시나리오를 실험실에서 생성할 수 있습니다. 매우 민첩한 펄스 프로필, 안테나 특성도 및 스캔 또는 6-DOF(Six Degrees of Freedom) 적용 궤도를 따른 이동과 같이 필수적인 현실 요소를 모두 반영한 3D 시나리오에서 정적 플랫폼 및 이동 플랫폼을 정의하기 위한 최적의 솔루션입니다.

Pulse Sequencer 소프트웨어 스크린샷
라이트박스 열기

Pulse Sequencer 소프트웨어 스크린샷

멀티-이미터 플랫폼이 포함된 2D 해상 시나리오

AoA(Angle-of-Arrival) 시뮬레이션

멀티채널 셋업

R&S®Pulse Sequencer Radar Simulation 소프트웨어를 사용하면 AoA(Angle of Arrival) 시뮬레이션을 위한 시나리오를 쉽고 직관적으로 생성할 수 있습니다. 이 솔루션과 함께 복수의 R&S®SMW200A Vector Signal Generator를 사용할 경우 진폭 비교, 간섭 측정 또는 TDOA(Time Difference of Arrival)를 이용하는 기기를 포함한 모든 유형의 방향 탐지 장비의 성능 특성을 빠르고 완벽하게 분석할 수 있습니다. 

Pulse Sequencer 소프트웨어 스크린샷
라이트박스 열기

Pulse Sequencer 소프트웨어 스크린샷

신호 레벨 및 2D 시나리오 미리보기를 이용한 3D 이동 미리보기

DFS 신호 생성

표준 호환 DFS(Dynamic Frequency Selection) 레이더 프로필 생성

로데슈바르즈 신호 발생기용 키코드 옵션이 포함된 R&S®Pulse Sequencer DFS(Dynamic Frequency Selection) 소프트웨어는 유럽(ETSI), 미국(FCC), 일본(MIC), 한국, 중국의 국립 표준 기구에서 지정한 레이더 신호를 생성하도록 특별하게 개발되었습니다. 

Pulse Sequencer(DFS) 스크린샷
라이트박스 열기

Pulse Sequencer(DFS) 스크린샷

사용 가능한 모델

R&S®SMW200A
모델
설명
본체

R&S®SMW-K300

주문 번호 1413.8805.02

설명
외부 PC에 설치된 R&S®Pulse Sequencer Software에서 레이더 신호 시뮬레이션 기본 기능 옵션
본체

R&S®SMW-K302

주문 번호 1413.8857.02

설명
두 개 이상의 이미터가 있는 레이더 플랫폼의 시뮬레이션 기능을 추가합니다.
본체

R&S®SMW-K301

주문 번호 1413.9776.02

설명
안테나 패턴, 안테나 스캔 등 이미터와 수신기를 위한 시뮬레이션 기능을 추가합니다.
본체

R&S®SMW-K304

주문 번호 1413.8957.02

설명
이동식 방사체 및 수신기를 위한 시뮬레이션 기능을 추가합니다.
본체

R&S®SMW-K306

주문 번호 1413.9053.02

설명
인터리브 이미터의 시뮬레이션 기능을 추가합니다.
본체

R&S®SMW-K308

주문 번호 1414.1433.02

설명
Angle of Arrival(AoA) 시뮬레이션 기능 추가
본체

R&S®SMW-K309

주문 번호 1414.6706.02

설명
2D 백그라운드 맵을 포함한 시뮬레이션 기능을 추가합니다
본체

R&S®SMW-K315

주문 번호 1414.6529.02

설명
추가 R&S®SMW-B15 Baseband Generator에 Pulse dropping이 없는 다중 이미터의 시뮬레이션 기능을 추가합니다. (pulse on pulse, pulse on CW)
본체

R&S®SMW-K307

주문 번호 1413.3510.02

설명
R&S®Pulse Sequencer Software에 512개 인터리브 이미터를 위한 시뮬레이션 기능을 추가합니다.
본체
R&S®SMBV100B
모델
설명
본체

R&S®SMBVB-K300

주문 번호 1423.8414.02

설명
R&S®Pulse Sequencer Software 탑재 외부 PC에서 레이더 신호를 시뮬레이션하기 위한 기본 기능 세트.
본체

R&S®SMBVB-K301

주문 번호 1423.8420.02

설명
안테나 패턴, 안테나 스캔 등 이미터와 수신기를 위한 시뮬레이션 기능을 추가합니다
본체

R&S®SMBVB-K308

주문 번호 1423.8437.02

설명
Angle of Arrival(AoA) 시뮬레이션 기능 추가
본체
R&S®SGT100A
모델
설명
본체

R&S®SGT-K300

주문 번호 1419.7652.02

설명
외부 PC에서 R&S®Pulse Sequencer Software를 이용해 레이더 신호를 시뮬레이션하기 위한 기본 기능 세트
본체

R&S®SGT-K301

주문 번호 1419.7700.02

설명
안테나 패턴, 안테나 스캔 등 이미터와 수신기를 위한 시뮬레이션 기능을 추가합니다
본체

R&S®SGT-K308

주문 번호 1419.7730.02

설명
Angle of Arrival(AoA) 시뮬레이션 기능 추가
본체
Digital
모델
설명
본체

R&S®PULSE-K39 Pulse Sequencer Digital, expert upgrade

주문 번호 1414.7125.12

설명
Pulse Sequencer Digital software expert upgrade for angle of arrival simulation, moving radar platforms, multiple output destinations, pulse interleaving, map import and other features. 
본체

R&S®PULSE-K32 Pulse Sequencer Digital, standard version

주문 번호 1414.7077.12

설명
Pulse Sequencer Digital software standard version, pulses, sequences, PDW import, emitters and platforms
본체
R&S®SMM100A
모델
설명
본체

R&S®SMM-K300

주문 번호 1441.1153.02

설명
외부 PC에 설치된 R&S®Pulse Sequencer Software에서 레이더 신호 시뮬레이션 기본 기능 옵션
본체

R&S®SMM-K301

주문 번호 1441.1201.02

설명
안테나 패턴, 안테나 스캔 등 이미터와 수신기를 위한 시뮬레이션 기능을 추가합니다.
본체

관련 동영상

복수 방사체 시뮬레이션

작동 상황에서는 동시에 많은 에미터 신호가 존재하며 pulse-on-pulse 상황이 쉽게 발생할 수 있습니다.

7월 30, 2019

이동 방사체 시뮬레이션

대부분의 Test Case에서는 이동하는 레이더 방사체를 시뮬레이션하는 것이 중요합니다.

7월 30, 2019

Angle of Arrival 시뮬레이션

공중, 해상 또는 육상 기반 플랫폼은 방향 탐지 기능이 있어야 합니다.

7월 30, 2019

실험 환경에서 지원되는 첨단 레이더 신호 시뮬레이션

R&S®SMW200A Vector Signal Generator와 R&S®Pulse Sequencer Software 패키지는 강력한 상용 레이더 신호 시뮬레이터입니다.

7월 24, 2019

수신 파워 레벨 시뮬레이션

그림은 항공 시나리오로 인한 레벨 변동을 보여줍니다. 수신기의 4섹터 안테나 중 하나의 RF 파워 레벨 트레이스만 표시되어 있습니다.

2월 12, 2019

현실적인 항공기 시나리오 시뮬레이션

리시버(아래 느리게 움직이는 빨간색 항공기 참조)의 항공 경로는 궤도 시뮬레이터에서 임포트한 것입니다.

2월 12, 2019

웹세미나: Radar signal generation

이 웹세미나는 차세대 단일 채널 및 멀티채널 디지털 수신기의 테스트 요구 사항에 대해 논의하며, R&S®SMW200A Vector Signal Generator와 R&S®Pulse Sequencer Software를 기반으로 하는 효율적, 포괄적 테스트 솔루션에 대해 설명합니다.

7월 02, 2018

R&S®Pulse Sequencer Software를 이용한 시퀀스 구축

이 동영상은 R&S®SMW200A 및 R&S®Pulse Sequencer Software를 이용하여 펄스 반복 및 루프를 통해 단순한 펄스 시퀀스를 생성하는 방법을 시연합니다.

10월 10, 2017

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.