R&S®SMB100A Microwave 신호 발생기

R&S®SMB100A Microwave 신호 발생기
라이트박스 열기
R&S®SMB100A Microwave 신호 발생기
라이트박스 열기
R&S®SMB100A Microwave 신호 발생기
라이트박스 열기
R&S®SMB100A Microwave 신호 발생기
라이트박스 열기
R&S®SMB100A Microwave 신호 발생기
라이트박스 열기
R&S®SMB100A Microwave 신호 발생기
라이트박스 열기
R&S®SMB100A Microwave 신호 발생기
라이트박스 열기
R&S®SMB100A Microwave 신호 발생기
라이트박스 열기
R&S®SMB100A Microwave Signal Generator, 전면 R&S®SMB100A Microwave Signal Generator, 전면 위 R&S®SMB100A Microwave Signal Generator, 측면 R&S®SMB100A Microwave Signal Generator, 후면 R&S®SMB100A Microwave Signal Generator, 배너 이미지 R&S®SMB100A Microwave Signal Generator, 배너 이미지 R&S®SMB100A Microwave Signal Generator, 애플리케이션 이미지 R&S®SMB100A Microwave Signal Generator, 애플리케이션 이미지

주요 사항

  • 주파수 대역: 100 kHz ~ 12.75, 20, 31.8, 40 GHz
  • 10 GHz 및 20 kHz 오프셋에서 SSB 위상 노이즈 –108 dBc(typ.)
  • 10 GHz 및 30 MHz 오프셋에서 Wideband 노이즈 –138 dBc
  • 최대 +27 dBm(meas.)의 높은 출력
  • 지원되는 AM, FM/φM 및 펄스 변조를 이용한 아날로그 변조

범용, 초소형 최대 40 GHz, 업컨버터 사용 시 170 GHz

컴팩트한 다목적 R&S®SMB100A Microwave Signal Generator는 최고 40GHz의 주파수 대역으로 뛰어난 스펙트럼 순도와 높은 출력을 제공합니다. 또한 작동이 간편하며 포괄적 기능과 경제적인 소유 비용을 제공합니다. R&S®SMB100A는 동급 기기 대비 뛰어난 Microwave 특성을 제공하므로 범용 기기로 유용하게 활용할 수 있습니다. 뛰어난 특성과 컴팩트한 크기, 가벼운 무게로 다양한 부문에 적합합니다. R&S®SMB100A는 개발, 생산, 서비스 또는 아날로그 Microwave 신호가 필요한 작업에 최적입니다.

 

기능 및 장점

미드레인지에서 가장 뛰어난 신호 품질

최저 SSB 위상 노이즈, 고조파, 비고조파 및 Wideband 노이즈

  • 10 GHz(20 kHz 캐리어 오프셋, 1 Hz 측정 대역폭)에서 –108 dBc(typ.)의 매우 낮은 SSB 위상 노이즈
  • 20 GHz 및 40 GHz 모델을 위한 내부의 낮은 하모닉 옵션 필터로 150 MHz 이상의 주파수에서 하모닉을 -50 dBc 미만으로 낮춥니다
  • 혁신적 DDS 기반 신디사이저 개념 

다른 주파수에 대한 SSB 위상 노이즈
라이트박스 열기

다른 주파수에 대한 SSB 위상 노이즈

12.75/20/31.8/40 GHz 모델에서 R&S®SMB-B1H OCXO 옵션으로 측정한 SSB 위상 노이즈

높은 출력 및 넓은 레벨 범위 

최대 +27 dBm(meas.)의 높은 출력

R&S®SMB100A는 12.75 GHz 기기에 대해 > +18 dBm의 높은 출력과 뛰어난 신호 품질을 기본적으로 구현합니다. 최대 측정 가능한 가용 출력은 +27 dBm까지입니다.
20GHz 모델용 R&S®SMB-B31 High Power 옵션은 +19 dBm의 지정 출력을 제공하며 40 GHz 모델용 R&S®SMB-B32 High Power 옵션은 최고 20 GHz 및 40 GHz까지의 넓은 주파수 범위에서 +16 dBm을 달성합니다.

최대 측정 출력
라이트박스 열기

최대 측정 출력

극대화된 출력 레벨 대 주파수(meas.).

생산에 적합 

테스트 시스템에 간편한 통합 및 혁신적 조작 기능

  • 마모에 강한 최고 12.75GHz 전자 감쇠기로 장수명 보장
  • 높은 레벨 정확성 및 반복성으로 높은 생산수율 지원
  • 폐쇄형 루프 전력 제어를 통해 테스트 셋업의 불필요한 전력 드리프트와 상관없이 DUT에 매우 정확하고 안정적인 입력 전력을 보장합니다
  • 짧은 주파수 및 레벨 설정 시간(List 모드에서 추가 감소 가능)
  • 저전력 소비

폐루프 전력 제어
라이트박스 열기

폐루프 전력 제어

폐쇄형 루프 전력 제어를 통해 불필요한 전력 드리프트 또는 셋업 변경과 상관없이 DUT에 매우 정확하고 안정적인 입력 전력 보장

R&S®NRP-Zxx 파워 센서 지원

R&S®SMB100A는 다양한 R&S®NRP-Zxx USB Power Sensor를 지원합니다.

R&S®NRP-Z55는 발생기의 주파수 및 레벨 범위를 최고 40 GHz까지 최적으로 업그레이드해주는 파워 센서입니다. R&S®SMB100A에 이 파워 센서를 장착할 경우 외부 레벨 보정을 자동으로 수행하며 테스트 셋업의 전력을 정밀 측정합니다.

R&S®NRP Power Sensor 연결
라이트박스 열기

R&S®NRP Power Sensor 연결

로데슈바르즈 파워 센서를 연결한 R&S®SMB100A

UCOR(User Corretion)

외부 주파수 응답 보상

DUT는 긴 케이블 또는 기타 주파수에 따라 달라지는 구성부품을 통해 신호 발생기에 연결되는 경우가 많으므로 주파수 응답을 보상하는 것이 매우 중요합니다. R&S®SMB100A는 이 목적을 위해 UCOR(User Correction) 기능을 제공합니다. 버튼 하나만 누르면 R&S®NRP Power Sensor와 UCOR 값이 자동으로 판독됩니다. UCOR을 사용할 경우 새로운 레퍼런스 평면에서 주파수 응답이 보상된 RF 신호를 사용할 수 있습니다.

셋업 및 UCOR 기능
라이트박스 열기

셋업 및 UCOR 기능

R&S®SMB100A와 DUT 간 케이블 및 기타 구성요소(자체 주파수 응답 적용)를 사용할 경우 상대적 출력 표시

50 GHz에서 170 GHz까지 주파수 확장

  • R&S®SMB100A Signal Generator(≥ 20GHz) 및 USB를 통해 제어하는 외부 R&S®SMZ Frequency Multiplier
  • 내부 감쇠기(기계식 또는 전자식 제어)는 주파수 체배기와 같은 하우징에 통합할 수 있습니다

R&S®SMB100A 및 R&S®SMZ110
라이트박스 열기

R&S®SMB100A 및 R&S®SMZ110

R&S®SMB100A Microwave Signal Generator(20 GHz 또는 40 GHz) 및 R&S®SMZ110 Frequency Multiplier(전자 제어식 감쇠기 탑재).

폐루프 전력 제어

방향성 결합기 및 연결된 R&S®NRP-Zxx Power Sensor를 사용하여 DUT 입력 파워를 측정할 수 있습니다. 방향성 결합기 대신 R&S®NRP-Z28 Level Control Sensor를 사용하는 것도 적절합니다. R&S®NRP-Zxx 또는 R&S®NRP-Z28에서 측정된 값이 R&S®SMB100A로 다시 입력되면 기기에서 해당 출력 파워를 즉시 조정하여 필요 레벨과 측정된 레벨 간 차이를 보정합니다.

R&S®SMB100A를 이용한 폐쇄형 루프 전력 제어
라이트박스 열기

R&S®SMB100A를 이용한 폐쇄형 루프 전력 제어

폐쇄형 루프 전력 제어를 통해 불필요한 전력 드리프트 또는 셋업 변경과 상관없이 DUT에 매우 정확하고 안정적인 입력 전력 보장

사용 가능한 옵션

주파수 옵션
산물
설명
R&S®SMB-B112

주문 번호 1407.2109.02

설명

100 kHz ~ 12.75 GHz, 전자식 단계 감쇠기 사용 시

R&S®SMB-B112L

주문 번호 1407.2150.02

설명

100 kHz ~ 12.75 GHz, 단계 감쇠기 사용 시

R&S®SMB-B120

주문 번호 1407.2209.02

설명

100 kHz ~ 20 GHz, 기계식 단계 감쇠기 사용 시

R&S®SMB-B120L

주문 번호 1407.2250.02

설명

100 kHz ~ 20 GHz, 단계 감쇠기 사용 시

R&S®SMB-B131

주문 번호 1407.2280.02

설명

100 kHz ~ 31.8 GHz, 기계식 단계 감쇠기 사용 시

R&S®SMB-B140

주문 번호 1407.2309.02

설명

100 kHz ~ 40 GHz, 기계식 단계 감쇠기 사용 시

R&S®SMB-B140L

주문 번호 1407.2350.02

설명

100 kHz ~ 40 GHz, 단계 감쇠기 사용 시

R&S®SMB-B140N

주문 번호 1407.2380.02

설명

100 kHz ~ 40 GHz, 기계식 단계 감쇠기 사용 시, 제한된 최소 펄스 폭

레퍼런스 오실레이터 옵션
산물
설명
R&S®SMB-B1

주문 번호 1407.3005.02

설명

OCXO 레퍼런스 오실레이터

R&S®SMB-B1H

주문 번호 1407.3070.02

설명

OCXO 레퍼런스 오실레이터, 고성능

아날로그 변조 옵션
산물
설명
R&S®SMB-K21

주문 번호 1407.3811.02

설명

펄스 변조기

R&S®SMB-B112/-B112L/-B120/-B120L/-B131/-B140/-B140N/-B140L용,

R&S®SMB-K23

주문 번호 1407.3786.02

설명

펄스 발생기

R&S®SMB-K27

주문 번호 1407.3828.02

설명

펄스 트레인

R&S®SMB-K23 옵션 필요, 일련 번호가 102400보다 큰 경우에만 제공됨

성능 개선 옵션
산물
설명
R&S®SMB-B31

주문 번호 1407.1260.02

설명

고출력, 50 MHz ~ 20 GHz(R&S®SMB-B120/-B120L용)

R&S®SMB-B32

주문 번호 1407.1360.02

설명

High Power, 50 MHz to 40 GHz (only available with R&S®SMB-B131/-B140/-B140N/-B140L)

R&S®SMB-B25

주문 번호 1407.1660.02

설명

고조파 필터(R&S®SMB-B120/-B120L용)

R&S®SMB-B26

주문 번호 1407.1760.02

설명

고조파 필터(R&S® SMB-B131/-B140/-B140L/-B140N용)

특징 및 기능
산물
설명
R&S®SMB-B30

주문 번호 1407.1160.02

설명

리버스 파워 방지(R&S®SMB-B112, R&S®SMB-B112L용)

기타 장치
산물
설명
R&S®ZZA-S234

주문 번호 1109.4493.00

설명

19" 랙 어댑터

R&S®TS-USB1

주문 번호 6124.2531.00

설명

RS-232 원격 제어용 USB 직렬 어댑터

문서
산물
설명
R&S®DCV-2

주문 번호 0240.2193.09

설명

교정 성적서

R&S®ACASMB100A

주문 번호 3596.9508.03

설명

공인 교정

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.