R&S®Fsx-k54 EMI 측정 애플리케이션

R&S®FPL1-K54, R&S®FSV-K54, R&S®FSV3-K54, R&S®FSW-K54

R&S®Fsx-k54 EMI 측정 애플리케이션
라이트박스 열기
R&S®Fsx-k54 EMI 측정 애플리케이션
라이트박스 열기
R&S®Fsx-k54 EMI Measurement Application, 스크린샷 R&S®Fsx-k54 EMI Measurement Application, 스크린샷

주요 사항

  • EMI 측정 대역폭 및 검출기
  • 최신 EMI 표준에 따른 한계선 라이브러리
  • 테스트 자동화 및 리포트 기능으로 빠르고 반복 가능한 측정
  • 안테나, 케이블, LISN 등에 대한 트랜스듀서 팩터
  • Elektra EMC 소프트웨어 지원

전자기 간섭 검출 및 제거

로데슈바르즈 신호 및 스펙트럼 분석기용 EMI 사전 적합성 애플리케이션(K54 옵션)은 제품 개발 중 EMI 분석에 추가하거나 원활한 제품 인증 과정을 준비하는 데 적합합니다. 일반적으로 상용, 자동차, 항공, 군사 제품 개발 부문에 적합합니다(CISPR, EN, FCC, DO-160 및 MIL-STD-461 표준).

기능 및 장점

최종 결과

  • CISPR 16-1-1에 따른 검출기: peak, quasi-peak, CISPR-average, RMS-average
  • CISPR 16-1-1에 따른 6dB 대역폭: 200 Hz, 9 KHz, 120 kHz, 1 MHz
  • MIL-STD-461 및 DO-160에 따른 6dB 대역폭: 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz
  • 안테나 팩터, 케이블 감쇠 등을 보정하기 위한 하나 이상의 트랜스듀서 팩터 선택
  • 한계 라인: 최신 버전의 공통 EMI 표준을 기준으로 하는 170개 이상의 EMI 한계 라인

트랜스듀서 정의(R&S®FPL1000 예)
라이트박스 열기

트랜스듀서 정의(R&S®FPL1000 예)

2개 트랜스듀서 팩터 선택(라인 임피던스 안정화 네트워크 및 관련 케이블링).

측정 자동화

자동화된 테스트 시퀀스로 반복 가능하며 빠른 측정

  • 사전 테스트: 하나 이상의 빠른 검출기로 설정된 주파수 대역 스윕(예: 피크 또는 평균) 
  • 중요 주파수 식별: 피크 및 한계 편차 자동 검출, 검출된 주파수를 표 형식으로 요약 표시  
  • 식별된 주파수 최종 측정: (Quasi-peak와 같이) 긴 측정 시간이 필요한 검출기를 이용하여 자동 최종 측정 및 설정된 한계 라인 기준 최종 평가

측정 자동화(R&S®FPL1000 예)
라이트박스 열기

측정 자동화(R&S®FPL1000 예)

스윕에 검출기 2개를 사용합니다. 식별된 최대값이 목록에 표시되고 자동으로 재측정됩니다. PASS/FAIL 상태가 분명히 표시됩니다.

상세 신호 분석

  • 큰 스팬/작은 측정 대역폭에서도 최대 200,001 스윕 포인트로 높은 주파수 분해능
  • 넓은 주파수 대역에서도 로그 주파수 스케일로 낮은 주파수를 상세 분석
  • 표준 탐지기 및 CISPR 탐지기를 이용하여, 선택한 주파수 대역에서 시간에 따른 신호 동작을 분석하기 위한 제로 스팬 측정
  • 주변 간섭 요인을 식별하기 위한 오디오 출력을 이용한 AM 및 FM 복조

제로 스팬 측정(R&S®FPL1000 예)
라이트박스 열기

제로 스팬 측정(R&S®FPL1000 예)

신호를 580 kHz에서 일정 시간 분석합니다. 간섭의 반복 속도는 50 Hz(20 ms)입니다.

효율적이고 빠른 성능

  • 한계선: 최신 버전의 공통 EMI 표준(CISPR/EN, FCC, MIL-STD-461, DO-160)을 기준으로 하는 170개 이상의 EMI 한계선을 통한 빠르고 정확한 측정 셋업 구성
  • LISN 원격 제어: 연결된 로데슈바르즈 LISN을 제어하여 간단히 테스트 실행.
  • 리포트 생성: 버튼 하나로 측정 결과 출력

리미트 라인 선택(R&S®FPL1000 예)
라이트박스 열기

리미트 라인 선택(R&S®FPL1000 예)

최대 700W 전기 공구용 한계 라인 선택 및 가시성 및 트레이스 할당 정의.

R&S®ELEKTRA EMC Test Software 지원

R&S®ELEKTRA Test Software는 전체 EMC 시스템을 제어하며 EUT(Equipment under Test) 측정을 자동화합니다. R&S®ELEKTRA에서는 공통 표준에 따라 테스트 시스템 구성 및 테스트 설명을 간소화할 수 있습니다. 따라서 테스트를 더욱 빠르게 실행하고 포괄적인 테스트 리포트를 빠르게 생성할 수 있습니다.

R&S®ELEMI-E를 이용한 자동 EMI 측정
라이트박스 열기

R&S®ELEMI-E를 이용한 자동 EMI 측정

R&S®ELEKTRA 소프트웨어의 간소화된 버전인 R&S®ELEMI-E EMI Test Software는 개발 중 EMI 측정에 적합합니다.

애플리케이션 동영상

Conducted EMI pre-compliance analysis with an R&S®FPL1000 spectrum analyzer

EMI 측정 애플리케이션으로 230V 램프의 전도성 방사(Conducted emissions)를 검사하는 방법. 이 셋업에는 R&S®FPL1000 Spectrum Analyzer와 R&S®FPL1-K54 및 R&S®ENV216 옵션이 포함되어 있습니다.

8월 15, 2021

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.