R&S®ZVA-Zxxx 밀리미터파 컨버터

최대 110GHz의 네트워크 분석

R&S®ZVA-Zxxx 밀리미터파 컨버터
라이트박스 열기
R&S®ZVA-Zxxx 밀리미터파 컨버터
라이트박스 열기
R&S®ZVA-Zxxx 밀리미터파 컨버터
라이트박스 열기
R&S®ZVA-Zxxx 밀리미터파 컨버터
라이트박스 열기
R&S®ZVA-Zxxx 밀리미터파 컨버터
라이트박스 열기
R&S®ZVA-Zxxx 밀리미터파 컨버터
라이트박스 열기
R&S®ZVA-Zxxx millimeterwave converters, Front view R&S®ZVA-Zxxx millimeterwave converters, Front view R&S®ZVA-Zxxx millimeterwave converters, Side view R&S®ZVA-Zxxx millimeterwave converters, Back view R&S®ZVA-Zxxx millimeterwave converters, Application Image R&S®ZVA-Zxxx millimeterwave converters, 3D

주요 사항

  • 가변 출력
  • 전자 전력 제어
  • 자동 파라미터 설정
  • 편리한 사용
  • 멀티포트 및 트루 디퍼런셜 측정

E 및 W 대역에서 밀리미터파 측정

R&S®ZVA-Zxx 밀리미터파 컨버터는 E 대역 및 W 대역, 60 ~ 90GHz 및 75 ~ 110GHz에서 밀리미터파 측정이 가능합니다. 로데슈바르즈 컨버터는 다양한 다이내믹 레인지를 제공하며 조작이 매우 편리하고 빠르게 측정할 수 있습니다. R&S®ZVA와 결합할 경우 4포트 네트워크 분석기 및 컨버터 2대를 사용해 2포트 측정을 수행할 수 있으며 외부 발생기가 필요하지 않습니다. 2포트 네트워크 분석기는 LO 신호에 대한 외부 발생기가 필요하지 않습니다. R&S®ZNA는 외부 신호 발생기 없이 최대 4대의 컨버터를 연결할 수 있습니다.

기능 및 장점

주파수 범위

  • 60GHz ~ 90GHz (R&S®ZVA-Z90),
  • 75GHz ~ 110GHz (R&S®ZVA-Z110/R&S®ZVA-Z110E)
  • R&S®ZVA24/40/50/67 또는 R&S®ZNA26/43/50/67 네트워크 분석기 사용

넓은 다이내믹 레인지

  • R&S®ZVA-Z90: > 100dB, typ. 115dB
  • R&S®ZVA-Z110: > 100dB, typ. 110dB
  • R&S®ZVA-Z110E: > 95dB, typ. 110dB

가변 및 전자 출력

typ. +10dBm(R&S®ZVA-Z90),
typ. +10dBm(R&S®ZVA-Z110),
typ. 최대 +2dBm(R&S®ZVA-110E),
컨트롤 나사는 출력을 40dB(R&S®ZVA-Z110) 줄일 수 있습니다. R&S®ZVA-Z110E를 사용하여 출력을 전자식으로 25dB 줄일 수 있습니다. R&S®ZVA-Z110은 RF 입력 전력 변동을 이용해 70dB 줄일 수 있습니다.

자동 파라미터 설정

R&S®ZVA 및 R&S®ZNA 펌웨어는 R&S®ZVA-K8/R&S®ZNA-K8 컨버터 컨트롤 옵션을 이용해 컨버터를 실행합니다. 네트워크 분석기는 선택된 컨버터 유형을 기준으로 올바른 파라미터를 자동으로 설정합니다. 네트워크 분석기도 출력을 컨버터의 동축 입력으로 제한하여 컨버터를 보호합니다. 각 컨버터 대역에 대해 적절한 교정을 사용할 수 있습니다.

편리한 사용

컨버터에서 연장된 바에 컨버터 도파관 커넥터가 배열되어 있어 편리하게 사용할 수 있습니다. 나사로 체결된 플랜지 조인트는 교정 및 DUT 연결을 위해 쉽게 접근할 수 있습니다. 컨버터에는 3 ~ 4개의 높이 조절 발을 장착할 수 있습니다. 3개 발을 장착할 경우 테스트 포트 플랜지를 훨씬 쉽게 정렬할 수 있습니다. 컨버터에는 팬이 없어 입자에 민감한 환경에 매우 유리합니다.

멀티포트 및 트루 디퍼런셜 측정

커플러와 같은 멀티포트 기기는 3대 또는 4대의 컨버터를 사용하여 분석할 수 있습니다. 셋업은 R&S®ZVA24, R&S®ZVA40, R&S®ZVA50 또는 R&S®ZVA67와 외부 발생기, 테스트 포트당 컨버터 1대를 사용할 수 있습니다. R&S®ZNA26, R&S®ZNA43, R&S®ZNA50 또는 R&S®ZNA67는 외부 신호 발생기 없이 최대 4대의 컨버터를 연결할 수 있습니다. R&S®ZVA-Z90/R&S®ZVA-Z110 및 R&S®ZVA-Z110E는 트루 디퍼런셜 신호 발생에 적합합니다(트루 디퍼런셜 모드).

펄스 측정

컨버터는 펄스 모드에서도 작동하여 펄스 증폭기를 특성분석할 수 있습니다. 이 기능은 주파수 대비 측정(평균 펄스 및 Point-in-Pulse)과 펄스 프로필 측정에 모두 적용됩니다.

사용 가능한 모델

사용 가능한 모델
모델
상위 주파수
테스트 포트
출력 파워(typ.)

R&S®ZVA-Z90

주문 번호 1322.3024.02

상위 주파수
90 GHz
테스트 포트
WR12
출력 파워(typ.)
+10dBm

R&S®ZVA-Z110

주문 번호 1307.7000.02

상위 주파수
110 GHz
테스트 포트
WR10
출력 파워(typ.)
+10dBm

R&S®ZVA-Z110E

주문 번호 1307.7000.40

상위 주파수
110 GHz
테스트 포트
WR10
출력 파워(typ.)
-7dBm

R&S®ZVA-Z110E

주문 번호 1307.7000.50

상위 주파수
110 GHz
테스트 포트
WR10
출력 파워(typ.)
-1dBm

사용 가능한 옵션

도파관 교정 키트
산물
설명

주문 번호 1307.7700.10

설명

도파관 교정 키트 WR12, 60GHz ~ 90GHz (Sliding Match 비포함)

주문 번호 1307.7700.11

설명

도파관 교정 키트 WR12, 60GHz ~ 90GHz (Sliding Match 포함)

주문 번호 1307.7100.10

설명

도파관 교정 키트 WR10, 75GHz ~ 110GHz (Sliding Match 비포함)

주문 번호 1307.7100.11

설명

도파관 교정 키트 WR10, 75GHz ~ 110GHz (Sliding Match 포함)

일반 분석
산물
설명

주문 번호 1332.5388.02

설명

컨버터 제어 소프트웨어

(R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx용),

주문 번호 1307.7022.02

설명

 주파수 변환기 제어

(R&S®ZVA24/40/50/67용)

일반 액세서리
산물
설명
R&S®ZV-Z1118

주문 번호 1314.5373.00

설명

어댑터 SMA m/m 각도

0Hz ~ 18GHz

R&S®ZV-Z1218

주문 번호 1314.5380.00

설명

어댑터 SMA m/f 앵글

0Hz ~ 18GHz

R&S®ZV-Z1227

주문 번호 1307.0886.02

설명

양방향 Wilkinson 전력 분배기

4GHz ~ 27GHz

R&S®ZVAB-B44

주문 번호 1302.5544.02

설명

USB-to-IEC/IEEE 어댑터

(IEC/IEEE 버스를 통해 외부 기기 제어용)

R&S®ZCAK

주문 번호 1323.7746.24

설명

어댑터 키트

전력 분배기 및 직각 SMA(m/m) 어댑터 2개 포함(R&S®ZVA24 var. 28 또는 R&S®ZVA40 var. 48(4개 소스의 VNA) 사용 시 필요)

R&S®ZCAK

주문 번호 1323.7746.50

설명

어댑터 키트

1.85mm(f) ~ 2.92mm(m) 어댑터 4개 및 1.85mm(m) ~ 2.92mm(f) 어댑터 4개 포함(R&S®ZVA50 사용 시 필요)

R&S®ZCAK

주문 번호 1323.7746.67

설명

어댑터 키트

전력 분배기, 직각 SMA(m/m) 어댑터 2개 포함, 1.85mm(f) ~ 2.92mm(m) 어댑터 3개 및 1.85mm(m) ~ 2.92mm(f) 어댑터 4개 포함(R&S®ZVA67 사용 시 필요)

렌치
산물
설명
R&S®ZV-Z1000

주문 번호 1314.5467.02

설명

도파관 플랜지 나사용 토크 렌치

R&S®ZCAW

주문 번호 1175.1960.00

설명

도파관 플랜지 나사용 직각 렌치

R&S®ZCTW

주문 번호 1175.2014.02

설명

도파관 플랜지 나사용 토크 렌치

R&S®ZCTW

주문 번호 1175.2014.03

설명

도파관 플랜지 나사용 토크 렌치

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.