자동차 업계를 위한 레이더 신호 품질

Automotive radar signal analysis and generation

Signal analysis for high-frequency radar signals

The trend of increasing bandwidths – today up to 4GHz – allows a better object recognition than ever before. Rohde & Schwarz solutions characterize radar signals and components to improve the reliability of autonomous driving vehicles.

Due to the way radars operate, using radar based sensors to recognize the environment will only be as precise as the transmission signal. It is therefore very important to have a linear, low-noise signal for FMCW radars. The Rohde & Schwarz Signal and Transient Analysis Software ensures that these high requirements for the transmission signal are met.

Important key parameters such as chirp rate, length and deviation are automatically analyzed and presented in an easy-to-understand table. The individual chirps and their parameters are also displayed graphically, enabling intuitive and fast debugging.

If you have any questions please contact us

Benefits of our solutions

  • Up to 8.3 GHz of analysis bandwidth for the verification of wideband FMCW radars
  • Reduced risk by using products approved by Tier 1s and IC vendors and by aerospace and defense customers
  • Secure, future-proof investments in products from a supplier who strategically focuses on radar technology

Holger Gryska(자동차 레이더 시장 부문 매니저)

"레이더는 오늘날의 Lidar와 해상도가 비슷하고, 혁신 가능성이 높으며, 더 안전하면서도 우수한 ADAS 기능을 구현하는 주요 센서입니다. 고성능 RF 테스트 솔루션의 선도업체인 로데슈바르즈가 차세대 자동차 레이더 센서 및 모듈을 개발하고 통합하는 고객사의 성공을 지원합니다."

관련 제품

R&S®FSW Signal and Spectrum Analyzer

R&S®FSW Signal and Spectrum Analyzer는 고객 요구 사항을 충족시키기 위해 개발되었습니다. 낮은 위상 노이즈, 최대 8.3 GHz의 넓은 분석 대역폭, 쉽고 직관적으로 조작할 수 있는 스펙트럼 분석기의 빠르고 간단한 측정을 경험해 보세요.

제품 정보

R&S®RTP Digital Oscilloscope

R&S®RTP, FS-Z90 Mixer 및 VSE-K60으로 77-81 GHz 대역에서 차량용 레이더 신호를 자세히 분석하는 확장형 솔루션을 구성할 수 있습니다. R&S®RTP에서는 최대 4개 입력 신호의 위상 정합 획득이 가능하며, 교차-채널 및 교차-도메인을 측정할 수 있고 모든 측면의 시스템 성능을 360도에서 확인해줍니다.

제품 정보

R&S®SMW200A Vector Signal Generator

R&S®SMW200A Vector Signal Generator와 R&S®SMZ90 Frequency Multiplier를 결합할 경우 E 대역의 위상 변조 신호와 Wideband 주파수를 쉽고 편리하게 발생하는 간단한 솔루션을 구성할 수 있습니다.

제품 정보

차량용 레이더 신호 분석 관련 자료

eGuide: 오실로스코프를 이용한 레이더 신호 분석

최적의 실험실 셋업, 레이더 신호 채널 분석, 트리거링, 복조, 다채널에서의 위상 측정 및 상관 레이더 신호의 디버깅에 대해 자세히 알아보실 수 있습니다.

지금 eGuide를 무료로 다운로드해 보세요.

지금 다운로드

애플리케이션 카드: 오실로스코프 트리거의 유연한 사용으로 정확한 레이더 신호 분석

오실로스코프는 넓은 분석 대역폭과 다양한 트리거 기능으로 차량용 애플리케이션의 레이더 신호 분석에 적합합니다.

첨단 오실로스코프 트리거 시스템을 이용하고 구성하여 관심 신호를 정확하게 탐지하는 방법을 알아보세요.

추가 정보

웹세미나: Automotive Radar Signal Analysis

본 웹세미나에 참석하여 레이더 신호를 분석하고 검증하는 데 필요한 기본적인 측정 방법과 각 테스트 단계에 사용되는 도구를 확인해 보세요.

추가 정보

백서: UWB 레이더 신호 분석

UWB(Ultra-wide Band) 차량용 레이더 신호의 고급 분석 방법.

추가 정보

앱 노트: Automotive radar sensors

전송 신호 분석 및 간섭 테스트.

지금 다운로드

앱 노트: Chrip analysis of radar signals

MIMO 레이더 센서에 대한 멀티 채널 측정 및 다른 신호(예: 파워 레일)와의 상관관계.

추가 정보

앱 노트: Wideband FMCW radar signal

Wideband FMCW 레이더 신호에 대한 피크 및 평균 전력 측정.

추가 정보

앱 카드: Demodulating radar RF pulses with an oscilloscope

오실로스코프를 이용한 레이더 RF 펄스 복조.

추가 정보

뉴스레터 구독

뉴스레터 구독

최신 트렌드 및 애플리케이션에 대한 소식을 놓치지 마십시오.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.