R&S®ESW EMI test receiver

Excellent RF characteristics and high measurement speeds

R&S®ESW EMI test receiver
Abrir Lightbox
R&S®ESW EMI test receiver
Abrir Lightbox
R&S®ESW EMI test receiver
Abrir Lightbox
R&S®ESW EMI test receiver
Abrir Lightbox
R&S®ESW EMI test receiver, front view R&S®ESW EMI test receiver, front high R&S®ESW EMI test receiver, side view R&S®ESW EMI test receiver, back view

Key Facts

  • Frequency ranges from 1 Hz to 8 GHz, 26.5 GHz or 44 GHz
  • In line with CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC standards
  • Highest dynamic range and accuracy
  • Ultrafast measurements with FFT based time domain scan
  • Real-time spectrogram with up to 970 MHz bandwidth (option)

R&S®ESW EMI test receiver for compliance testing

Outstanding RF characteristics, high dynamic range and measurement accuracy make the R&S®ESW ideal for fast and reliable certification measurements. The receiver meets the most stringent requirements in line with CISPR, EN, MIL‑STD-461, DO‑160 and FCC. Every R&S®ESW comes with an FFT based time domain scan for fast measurements. The wideband extension option has an FFT bandwidth of up to 970 MHz, enabling the receiver to measure CISPR bands C and D all at once. The high bandwidth is captured in real-time, even when CISPR detectors are enabled. 

Features & benefits

Compliance testing

In line with all relevant standards

The R&S®ESW complies with CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC standards and offers all required bandwidths and detectors. Preconfigured limit lines and test automation make the receiver ideal for EMI testing in line with all relevant standards.

Compliant with all relevant standards
Abrir Lightbox

Compliant with all relevant standards

The R&S®ESW correctly detects, measures and weights all disturbance signals in line with EMI standards.

Fast scanning speeds

Time domain scan for fast measurements

Speed is crucial, especially for testing devices with short operating times. The R&S®ESW has an FFT based time domain scan (TDS) to measure large frequency segments at once rather than individual resolution bandwidths for each observation period in conventional stepped scan mode. FFT bandwidth can increase to 970 MHz with the wideband extension option for measuring CISPR bands C and D all at once. The high bandwidth is captured in real time even with CISPR detectors enabled.

Más información

Fast measurements with time domain scan
Abrir Lightbox

Fast measurements with time domain scan

Receiver mode with bargraph display of detector values, measurement graphs relative to limit lines and peak list with individual pass/fail detection.

Advanced user interface

Designed for effective testing

The R&S®ESW has a touchscreen with a 12.1" display for convenient and intuitive operation. The receiver has two additional customizable knobs that can be assigned functions such as resolution bandwidth, RF attenuation and measurement time.

Intuitive user interface
Abrir Lightbox

Intuitive user interface

Multiple simultaneous displays for a perfect overview. This image shows the interference analysis with the multiple CISPR APD application.

Superior RF performance

RF performance that meets highest demands

The R&S®ESW has the high dynamic range and sensitivity needed for the toughest EMI compliance testing. Low noise and built-in preselection with 21 filters enable accurate and reliable measurements.

Wide dynamic range and sensitivity
Abrir Lightbox

Wide dynamic range and sensitivity

Configurable input stage. The R&S®ESW performs best with preselection and notch filters as well as preamplifiers and attenuation.

Real-time measurements

Resolution of even the shortest interference

The R&S®ESW captures signals in real time, without any time gaps and with a bandwidth of up to 80 MHz. Even the shortest pulses are resolved and displayed intuitively in the persistence spectrum and spectrogram, showing detected signals that would otherwise remain hidden. Sporadic, pulsed or drifting signals are easy to identify with the real-time spectrum analysis option.

Real time spectrum option (R&S®ESW-K55)
Abrir Lightbox

Real time spectrum option (R&S®ESW-K55)

The persistence mode (above) and the spectrogram (below) enable detailed analysis of fluctuating signals.

Available models

Available models
Modelos
Frequency range
Measurement bandwidth
Noise indication
1 dB compression nominal @ 1 GHz
Residual spurious responses (1 MHz ≤ f ≤ 1 GHz)

R&S®ESW8

Order Number 1328.4100.09

Frequency range
 1 Hz to 8 GHz
Measurement bandwidth
1 Hz to 10 MHz (optional 80 MHZ)
Noise indication
< -7 dBµV
1 dB compression nominal @ 1 GHz
+15 dBm
Residual spurious responses (1 MHz ≤ f ≤ 1 GHz)
 < -110 dBm

R&S®ESW26

Order Number 1328.4100.27

Frequency range
 1 Hz to 26.5 GHz
Measurement bandwidth
1 Hz to 10 MHz (optional 80 MHZ)
Noise indication
< -5 dBµV
1 dB compression nominal @ 1 GHz
+15 dBm
Residual spurious responses (1 MHz ≤ f ≤ 1 GHz)
 < -110 dBm

R&S®ESW44

Order Number 1328.4100.45

Frequency range
 1 Hz to 44 GHz
Measurement bandwidth
1 Hz to 10 MHz (optional 80 MHZ)
Noise indication
< -5 dBµV
1 dB compression nominal @ 1 GHz
+15 dBm
Residual spurious responses (1 MHz ≤ f ≤ 1 GHz)
 < -110 dBm

Available options

Hardware options
Product
Descripción
R&S®ESW-B4

Order Number 1328.5012.02

Descripción

OCXO Precision Frequency Reference

R&S®ESW-B8

Order Number 1325.1474.02

Descripción

Resolution bandwidth up to 80 MHz

20/30/40/50/80 MHz additionally for R&S®ESW44

R&S®ESW-B8

Order Number 1325.1474.26

Descripción

Resolution bandwidth up to 80 MHz

20/30/40/50/80 MHz additionally for R&S®ESW8/R&S®ESW26

R&S®ESW-B8E

Order Number 1345.0167.02

Descripción

Resolution bandwidth up to 40 MHz

20/30/40 MHz additionally for R&S®ESW44

R&S®ESW-B10

Order Number 1328.5006.02

Descripción

External Generator Control

R&S®ESW-B18

Order Number 1328.4997.02

Descripción

Solid State Drive (SSD), including firmware for R&S®ESW

R&S®ESW-B21

Order Number 1331.6945.26

Descripción

LO/IF Ports for External Mixers

for R&S®ESW26

R&S®ESW-B21

Order Number 1331.6945.44

Descripción

LO/IF Ports for External Mixers

for R&S®ESW44

R&S®ESW-B24

Order Number 1328.4980.08

Descripción

Low-Noise Amplifier, 150 kHz to 8 GHz

R&S®ESW-B24

Order Number 1328.4980.26

Descripción

Low-Noise Amplifier, 150 kHz to 26.5 GHz

R&S®ESW-B24

Order Number 1328.4980.44

Descripción

Low-Noise Amplifier, 150 kHz to 44 GHz

R&S®FSW-B33

Order Number 1313.3602.02

Descripción

USB mass memory write protection

Descripción

R&S®ESW-B1000 wideband extension

Software options
Product
Descripción
R&S®ESW-K7

Order Number 1331.6216.02

Descripción

AM/FM/φM modulation analysis

R&S®ESW-K33

Order Number 1328.4916.02

Descripción

Security Write Protection, for solid state drive

R&S®ESW-K55

Order Number 1328.4968.02

Descripción

80 MHz real-time measurement application, POI > 15 μs

R&S®ESW-K58

Order Number 1345.0150.02

Descripción

Multi CISPR APD multichannel measurement function

Simultaneous testing of the amplitude probability function on up to 67 channels or up to 20 MHz span for microwave oven testing according to CISPR 11.

R&S®ESW-K980

Order Number 1345.0221.02

Descripción

Health and utilization monitoring service (HUMS)

Health and Utilization Monitoring Service for R&S®ESW 

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted en breve.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones:

La convocatoria es válida del 5 de Abril al 20 de junio de 2021. Participan transmisores de radio FM y TV de cualquier marca que se encuentren aún en operación. Se tomarán válidos para participar los datos registrados solo durante ese periodo de tiempo, solo se puede llenar el formulario 1 vez por persona. El acceso a ingresar datos en el formulario se restringirá el día 21 de Junio a las 00:00hrs. El 30 de Junio de 2021 anunciaremos a un ganador de cada categoría en este mismo web, por correo electrónico y a través de nuestras redes sociales. Más informacion. Anamaria@rohde-schwarz.com

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y el correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente éstas tienen facultad para recibir los premios. No está permitida la participación de una persona individual por nombre y cuenta propia, sino que deberá hacerlo como representante de una persona jurídica llenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo tendrá lugar en la sede de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de no aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de llenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán por cuenta del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.