R&S®ZVA-Zxxx millimeterwave converters

Network analysis up to 110 GHz

R&S®ZVA-Zxxx millimeterwave converters
Abrir Lightbox
R&S®ZVA-Zxxx millimeterwave converters
Abrir Lightbox
R&S®ZVA-Zxxx millimeterwave converters
Abrir Lightbox
R&S®ZVA-Zxxx millimeterwave converters
Abrir Lightbox
R&S®ZVA-Zxxx millimeterwave converters
Abrir Lightbox
R&S®ZVA-Zxxx millimeterwave converters
Abrir Lightbox
R&S®ZVA-Zxxx millimeterwave converters, Front view R&S®ZVA-Zxxx millimeterwave converters, Front view R&S®ZVA-Zxxx millimeterwave converters, Side view R&S®ZVA-Zxxx millimeterwave converters, Back view R&S®ZVA-Zxxx millimeterwave converters, Application Image R&S®ZVA-Zxxx millimeterwave converters, 3D

Key Facts

  • Variable output power
  • Electronic power control
  • Automatic parameter setting
  • Convenient handling
  • Multiport and true differential measurements

Millimeterwave measurements in E and W bands

The R&S®ZVA-Zxx millimeter-wave converters can make millimeterwave measurements in the E and W band from 60 to 90GHz and 75 to 110GHz. Rohde & Schwarz converters have a wide dynamic range, are very convenient to operate and enable fast measurements. When combined with the R&S®ZVA, two-port measurements can be performed with a four-port network analyzer and two converters; with no need for an external generator. A two-port network analyzer requires an external generator for LO signals. The R&S®ZNA can have up to four converters connected with no external signal generator.

Features & benefits

Frequency range

  • 60 GHz to 90 GHz (R&S®ZVA-Z90)
  • 75 GHz to 110 GHz (R&S®ZVA-Z110/R&S®ZVA-Z110E)
  • using an R&S®ZVA24/40/50/67 or an R&S®ZNA26/43/50/67 network analyzer

Wide dynamic range

  • R&S®ZVA-Z90: > 100 dB, typ. 115 dB
  • R&S®ZVA-Z110: > 100 dB, typ. 110 dB
  • R&S®ZVA-Z110E: > 95 dB, typ. 110 dB

Variable and electronic output power

typ. +10 dBm (R&S®ZVA-Z90)
typ. +10 dBm (R&S®ZVA-Z110)
typ. up to +2 dBm (R&S®ZVA-110E)
A control screw can reduce power by 40 dB (R&S®ZVA-Z110). The output power can be electronically reduced by 25 dB with the R&S®ZVA-Z110E. The R&S®ZVA-Z110 can reduce it by 70 dB with RF input power variation.

Automatic parameter setting

R&S®ZVA and R&S®ZNA firmware runs the converters with the R&S®ZVA-K8/R&S®ZNA-K8 converter control option. The network analyzer will automatically set the correct parameters based on the selected converter type. The network analyzer also protects converters by limiting output power to the converter coaxial inputs. For each converter band an appropriate calibration is available.

Convenient handling

The converter waveguide connectors are arranged on a bar extending from the converter for convenient usage. The screwed flange joints are easily accessible for calibration and connecting the DUT. The converters can have three or four height-adjustable feet. Three feet make it much easier to align the test port flange. The converters have no fans – a big advantage in particle-sensitive environments.

Multiport and true differential measurements

Multiport devices such as couplers can be analyzed with three or four converters. The setup can use an R&S®ZVA24, R&S®ZVA40, R&S®ZVA50 or R&S®ZVA67 plus an external generator and one converter per test port. The R&S®ZNA26, R&S®ZNA43, R&S®ZNA50 or R&S®ZNA67 enable up to four converters, which can be connected without needing an external signal generator. The R&S®ZVA-Z90/R&S®ZVA-Z110 and the R&S®ZVA-Z110E are ideal for generating true differential signals (true differential mode).

Pulsed measurements

The converters can also be operated in pulsed mode − to characterize pulsed amplifiers. This applies to both measurements versus frequency (average pulse and point-in-pulse) and pulse profile measurements.

Available models

Available models
Modelos
Upper frequency
Test port
Output power (typ.)

R&S®ZVA-Z90

Order Number 1322.3024.02

Upper frequency
90 GHz
Test port
WR12
Output power (typ.)
+10 dBm

R&S®ZVA-Z110

Order Number 1307.7000.02

Upper frequency
110 GHz
Test port
WR10
Output power (typ.)
+10 dBm

R&S®ZVA-Z110E

Order Number 1307.7000.40

Upper frequency
110 GHz
Test port
WR10
Output power (typ.)
-7 dBm

R&S®ZVA-Z110E

Order Number 1307.7000.50

Upper frequency
110 GHz
Test port
WR10
Output power (typ.)
-1 dBm

Available options

Waveguide calibration kits
Product
Descripción

Order Number 1307.7700.10

Descripción

Waveguide calibration kit WR12, 60 GHz to 90 GHz (without sliding match)

Order Number 1307.7700.11

Descripción

Waveguide calibration kit WR12, 60 GHz to 90 GHz (with sliding match)

Order Number 1307.7100.10

Descripción

Waveguide calibration kit WR10, 75 GHz to 110 GHz (without sliding match)

Order Number 1307.7100.11

Descripción

Waveguide calibration kit WR10, 75 GHz to 110 GHz (with sliding match)

General analysis
Product
Descripción

Order Number 1332.5388.02

Descripción

Converter Control Software

(for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx)

Order Number 1307.7022.02

Descripción

 Freq. converter control

(for R&S®ZVA24/40/50/67);

General accessories
Product
Descripción
R&S®ZV-Z1118

Order Number 1314.5373.00

Descripción

Adapter SMA m/m angle

0 Hz to 18 GHz

R&S®ZV-Z1218

Order Number 1314.5380.00

Descripción

Adapter SMA m/f angle

0 Hz to 18 GHz

R&S®ZV-Z1227

Order Number 1307.0886.02

Descripción

2-way Wilkinson power divider

4 GHz to 27 GHz

R&S®ZVAB-B44

Order Number 1302.5544.02

Descripción

USB-to-IEC/IEEE adapter

(for control of external devices via IEC/IEEE bus)

R&S®ZCAK

Order Number 1323.7746.24

Descripción

Adapter kit

including a power divider and two right angle SMA (m/m) adapters (required if R&S®ZVA24 var. 28 or R&S®ZVA40 var. 48 (VNAs with four sources) is used)

R&S®ZCAK

Order Number 1323.7746.50

Descripción

Adapter kit

including four 1.85 mm (f) to 2.92 mm (m) adapters and four 1.85 mm (m) to 2.92 mm (f) adapters (required if R&S®ZVA50 is used)

R&S®ZCAK

Order Number 1323.7746.67

Descripción

Adapter kit

including a power divider, two right angle SMA (m/m) adapters, three 1.85 mm (f) to 2.92 mm (m) adapters and four 1.85 mm (m) to 2.92 mm (f) adapters (required if R&S®ZVA67 is used)

Wrenches
Product
Descripción
R&S®ZV-Z1000

Order Number 1314.5467.02

Descripción

Torque wrench for waveguide flange screws

R&S®ZCAW

Order Number 1175.1960.00

Descripción

Angled wrench for waveguide flange screws

R&S®ZCTW

Order Number 1175.2014.02

Descripción

Torque wrench for waveguide flange screws

R&S®ZCTW

Order Number 1175.2014.03

Descripción

Torque wrench for waveguide flange screws

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted en breve.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones:

La convocatoria es válida del 5 de Abril al 20 de junio de 2021. Participan transmisores de radio FM y TV de cualquier marca que se encuentren aún en operación. Se tomarán válidos para participar los datos registrados solo durante ese periodo de tiempo, solo se puede llenar el formulario 1 vez por persona. El acceso a ingresar datos en el formulario se restringirá el día 21 de Junio a las 00:00hrs. El 30 de Junio de 2021 anunciaremos a un ganador de cada categoría en este mismo web, por correo electrónico y a través de nuestras redes sociales. Más informacion. Anamaria@rohde-schwarz.com

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y el correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente éstas tienen facultad para recibir los premios. No está permitida la participación de una persona individual por nombre y cuenta propia, sino que deberá hacerlo como representante de una persona jurídica llenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo tendrá lugar en la sede de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de no aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de llenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán por cuenta del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.