R&S®EFA - Software

Descargue software actualizado para su producto de Rohde & Schwarz.

Software y notas de la versión (3)

Denominación file size Versión Date
R&S EFA Tx Check Version 1.2

Released on 18.04.2006
Software for every digital R&S EFA
R&S EFA TxCheck was developed to analyze the quality of digital TV transmitters and modulators during terrestrial and cable transmission. The program was written for the TV Test Receiver R&S EFA and supports models 20/23, 40/43, 50/53, 60/63, and 70/73, as well as options R&S EFA-B10 (DVB-T) and R&S EFA-B20 (ATSC/8VSB and DVB-C/QAM or J.83/A/B/C), covering all digital models of the TV Test Receiver R&S EFA.R&S EFA TxCheck automatically measures the user-defined measurement parameters and uses these to calculate the quality of the transmitted signal. The measurement values, as well as the results, are displayed in an electronic measurement report.If you prefer just an overview of the measured values without the quality analysis, you can suppress display of the quality settings and results.
The results of a measurement can be stored for later reuse in a proprietary file format *.TXC. Settings you make can also be saved in files for later reuse.The test receiver can be operated via the RS-232-C interface as well as via the IEC/IEEE bus (IEC625, IEEE488).
Please copy EFA_TxCheck_1.2_setup.exe into a directory, e. g. "C:\temp". Change to this directory and start the installation with EFA_TxCheck_1.2_setup.exe

3 MB V 1.2 Apr 18, 2006
Measurement Software EFA-Scan R&S EFA-K1 - Error 1706

Some hints for user of Microsoft Office 2000 used with Microsoft Windows NT 4.0 or Microsoft Windows 2000

9 kB Dec 03, 2003
Measurement Software EFA-Scan R&S EFA-K1 - Demo Software, Revision 2.01

To install EFA Scan 2.01 please run SETUP.EXE, and follow the on-screen instructions. This software cannot coexist with previous versions of the software, so the setup will first check for, and remove, any existing installations.
See also the section entitled FIRMWARE UPGRADE below.
The setup includes an Operating Manual for the software in electronic format. It can be read by Acrobat Reader version 3 or later.
FIRMWARE UPGRADE
This software is designed to work with an EFA running firmware version 5.00 or later.
To find out which firmware version is installed in your EFA, look at the selftest screen displayed immediately after switch-on.
If you need to upgrade, please contact your Rohde & Schwarz representative.

6 MB V 2.01 Dec 03, 2003
Gracias.

La solicitud se ha enviado correctamente.

En breve nos pondremos en contacto con usted.

Su equipo de servicio Rohde & Schwarz

Download

Introduzca su nombre.

Introduzca una dirección de correo electrónico válida.

Introduzca el nombre.

Introduzca el nombre de la empresa.

Introduzca el país.

Permiso de marketing
Introduzca los caracteres que se muestran en la imagen
show captcha

Datos incorrectos.
Tipo de software
Grupo de productos
International Website