Application Notes

How to Run WCDMA BER/ BLER Tests Using R&S Vector Signal Generators

This application note shows how to run 3GPP WCDMA BER and BLER tests according to standard TS 25.141 with the Vector Signal Generators R&S®SMBV100A, R&S®SMJ100A, or R&S®SMU200A. The description of hardware test setup is followed by detailed instructions on how to configure the R&S® generators and how to run a BER or BLER test step by step. Remote control commands for the generators are included, to simplify integrating the BER/BLER tests into your proprietary test suite.

Name
Type
Version/Firmware
Date
Size
How to Run WCDMA BER/ BLER Tests Using R&S Vector Signal Generators | 1MA144
Type
Application Note
Version/Firmware
04
Date
06-Mar-2009
Size
573 kB