Brochures and Data Sheets for R&S®FSW

This document provides the technical specifications of the R&S®FSW-K95/-K97 WLAN IEEE 802.11ad/ay measurement application.

This document provides the technical specifications of the R&S®VSE-K91/FSx-K91 WLAN IEEE802.11a/b/g/j/p/n/ac/ax measurement application.

English (PD 5214.6280.12)

The R&S®FS-SNS smart noise sources enable simple and accurate noise figure and gain measurements by automatically loading all necessary setup parameters and taking the environmental temperature into account. Measurement uncertainty is calculated automatically and can even be displayed on the result screen.

English (PD 5214.1989.12)

Reference measurements for calibrating navigation receivers, Production test measurements of ILS/VOR ground stations, Measurement and calibration of ramp testers

This document provides the technical specifications of the R&S®VSE-K60 | R&S®VSE-K60C | R&S®VSE-K60H, of the R&S®FSW-K60 | R&S®FSW-K60C | R&S®FSW-K60H and of theR&S®FSWP-K60 | R&S®FSWP-K60C | R&S®FSWP-K60H.

This document provides the technical specifications of the R&S®FSx-K50 spurious measurement application.

This document provides the technical specifications of the R&S®VSE-K144/-K146, R&S®FSx-K144/-K145 5G NR measurement application

R&S®FSW-B512R real-time spectrum analyzer 512 MHz, R&S®FSW-B800R real-time spectrum analyzer 800 MHz, R&S®FSW-K161R real-time spectrum measurement application 160 MHz, R&S®FSW-K512RE real-time spectrum measurement application 512 MHz, R&S®FSW-K800RE real-time spectrum measurement application 800 MHz

Enhanced Specifications for AM/FM/φM Modulation Analysis

This document provides the technical specifications of the R&S®VSE-K10, R&S®FSx-K10 GSM measurements

The R&S®VSE-K96 OFDM analysis software adds the capability to include modulation measurements on general OFDM signals. The OFDM demodulator is user-configurable and standard-independent.

When it comes to wideband signal generation and analysis, Rohde & Schwarz provides solutions that go all the way to millimeterwave frequencies and even beyond. Our signal generation and analysis solution portfolio covers the bandwidth and frequency requirements for 5G and offers a wide range of features and application software to address 5G testing challenges.

Slide left Slide right

Signal generator, signal and spectrum analyzer and power sensor solutions for 5G - Application Brochure

Signal generator, signal and spectrum analyzer and power sensor solutions for 5G - Application Brochure JA

The high-performance R&S®FSW signal and spectrum analyzer helps engineers accomplish the most demanding tasks. Its wide internal analysis bandwidth allows the characterization of wideband components and communications systems. Its unparalleled phase noise facilitates the development of high-performance oscillators such as those used in radars. A state-of-the-art multitouch display with gesture support ensures straightforward and intuitive operation. An embedded SCPI recorder enables easy creation of executable scripts.

Slide left Slide right

R&S®FSW Signal and Spectrum Analyzer - Product Brochure

R&S®FSW Signal and Spectrum Analyzer - Product Brochure JA

R&S®FSW Signal and Spectrum Analyzer - Product Brochure RU

R&S®FSW Signal and Spectrum Analyzer - Product Brochure ZH-CN

This document provides the technical specifications of the R&S®FSW signal and spectrum analyzer.

The R&S®FS-SNS smart noise sources enable simple and accurate noise figure and gain measurements by automatically loading all necessary setup parameters and taking the environmental temperature into account. Measurement uncertainty is calculated automatically and can even be displayed on the result screen.

Slide left Slide right

R&S®FS-SNS Smart Noise Sources - Product Brochure

R&S®FS-SNS Smart Noise Sources - Product Brochure DE

This document provides the technical specification of the EMI measurement application for signal and spectrum analyzers (R&S®FSW-K54, R&S®FSV3-K54, R&S®FSV-K54, R&S®FPL1-K54).

High precision test solutions for todays and tomorrows ADAS-radar

English (PD 5214.6616.22)

English (PD 3606.8208.22)

English (PD 3606.8208.12)

Slide left Slide right

R&S®FSW-K54 EMI Measurement Application - Product Brochure

R&S®FSW-K54 EMI Measurement Application - Product Brochure DE

160 MHz Real-time spectrum analyzer option

English (PD 3607.1842.22)

This document provides the technical specifications of the phase noise measurement application: R&S®FSW-K40, R&S®FSV3-K40, R&S®FPS-K40, R&S®FSV-K40.

The R&S®VSE-K6 option measures all relevant parameters such as pulse duration, pulse period, pulse rise and fall times, power drop across a pulse, and intrapulse phase modulation, and produces a trend analysis over many pulses. The user selects which results should be displayed simultaneously on the screen. The R&S®VSE thus delivers a full picture of e.g. a radar system within seconds.

Technical Specifications of the analog modulation analysis (AM/FM/φM) option for signal and spectrum analyzers and oscilloscopes from Rohde&Schwarz.

The -K10x options cover the inband measurements of 3GPP LTE and LTE advanced. The R&S®VSE-K100/-K102/-K104 options provide convenient analysis due to automatic detection of modulation formats. Each signal subframe is analyzed and the QPSK, 16QAM or 64QAM modulation formats plus the length of the cyclic prefix are automatically detected and used in the analysis. The cell identity can also be automatically detected, which reduces the number of settings required by the user to a minimum.

Rohde & Schwarz signal and spectrum analyzers equipped with the R&S®FSx-K30 option form the basis of a solution to accurately measure the noise figure in the millimeterwave frequency range using the Y-factor method.

Technical specifications of the noise figure measurement options for the R&S®Fxx signal and spectrum analyzers and the R&S®ZNL vector network analyzer from Rohde & Schwarz

The R&S®VSE-K70 option enables users to flexibly analyze digitally modulated single carriers down to the bit level. The clearly structured operating concept simplifies measurements, despite the wide range of analysis tools.

Technical specifications of the R&S®FSW-K201 OneWeb Reverse Link (SC-FDMA) measurement application for the R&S®FSW signal and spectrum analyzer

Rohde & Schwarz helps engineers develop and test satellite transponders, modules and components by providing the test and measurement solutions that the satellite market needs.

Slide left Slide right

Satellite payload and components testing with instruments from Rohde & Schwarz - Application Brochure

Satellite payload and components testing with instruments from Rohde & Schwarz - Application Brochure JA

160 MHz Real-Time Measurement Application, POI > 15 μs

English (PD 3606.7724.22)

Test and measurement solutions for in-orbit satellites: Once a communications satellite is on its target orbit, several routines need to be performed in order to ensure proper performance of the transponders in the payload. On-orbit measurements are also a vital part of live satellite maintenance. This application brochure focuses on a few important post-launch measurement setups where Rohde & Schwarz offers unique instruments.

Slide left Slide right

Ground station testing on satellites in orbit

Ground station testing on satellites in orbit JA

Equipped with the R&S®FSW-B512R real-time spectrum analyzer option, the R&S®FSW displays RF spectra seamlessly and in real time.

Specifications for the R&S®FSW-K17 Multicarrier Group Delay Measurements option for the R&S®FSW signal and spectrum analyzer

DOCSIS testing requirements include supporting a full channel load and coexistence of both DOCSIS 3.0 and DOCSIS 3.1 signals (in some cases analog TV as well). The R&S®CLGD is the only flexible and compact solution available on the market that can meet these testing requirements. The introduction of much wider bandwidths for DOCSIS 3.1 along with higher constellation modes (up to 16kQAM) require very powerful spectrum and signal analyzers. The R&S®FSW is ideal since it can measure MER that is typically 57 dB and higher and also provide BER measurements based on DOCSIS 3.1 signals.

This document provides the technical specifications of the R&S®VSE-K106/FSx-K106/FPS-K106 EUTRA/LTE NB-IoT measurement application.

Starting with the early microwave applications for radar, the advantage of increased bandwidth has been a deciding factor in shifting toward microwave and millimeterwave (mmWave) for communications technologies. It began with satellite transmissions and then came down to earth with cable television and wireless local area networks such as Wi-Fi followed by new applications in the automotive and aerospace fields. The high bandwidth and high capacity demand of 5G – the next generation of mobile networks – also promote the trend toward ever higher frequencies in electronics.

Tackling a standard with wide bandwidth and high frequency

This document provides the technical specifications of the R&S®FSx-K18(D) amplifier measurements.