R&S®FSW - FAQ
-
Different frequency data export using ASCII trace export SCPI commands
-
Where can I find the accessories for a device?
-
How do I calculate the logarithmic frequency steps for the horizontal axis?
-
Effect of linear or logarithmic x-axis scaling for the transducer factor?
-
WEB Control on FSW using VNC
-
Self Alignment via remote control via TCP/IP => 'CAL?
I want to make the Self Alignment via remote control with the command 'CAL?'.Because this takes sometimes a very long time how can I detect the end.In the manual is mentioned to use a SRQ, but this does not work when I use a TCP/IP connectionYes, the SRQ line is a hardware line with the IEEE bus and this does not work with normal TCP/IP. So we cannot use it.Because the calibration command is a query
-
How to read IQ data from Spectrum Analyzer and convert to dBm values
-
Measurement points of a spectrum analyzer
-
FSW: Check for SYNC error via remote control
I am using the 3GPP application.When the FSW is not synchronized to the signal, there is a big red bar with 'Sync failed' at the bottom of the display.How can I check for this via remote control?You can use the following command to check the status of the info bar at the bottom of the display:STATus:QUEStionable:EXTended:INFO:CONDition?When the status is 'Sync failed', this command returns '8'. This
-
How to automatically create and transfer a screenshot from Spectrum Analyzer to the controller PC - Python example
Name Last Modified SizeFSW_hardcopy_transfer_v1_3.py Jan 29, 2021 2 kB
-
Spectrum Analyzers - Export of trace data into a CSV file via remote control
Name Last Modified SizeFPL_Measurement_to_CSV.zip Dec 10, 2020 77 kB
