From two-man lab to global player Great stories often have very modest beginnings in very different places – from garages to living rooms or bedrooms. Although the places may differ, they all have three things in common: a brilliant idea, a lot of courage and a large dose of inventive talent. And that’s just how the story of Rohde & Schwarz began. Great stories often have very modest beginnings in

R&S®RTO6: Easy triggering, decoding and protocol analysis The R&S®RTO6 makes tracking down protocol errors or specific parts of a frame straightforward with a protocol aware trigger. The R&S®RTO6 makes tracking down protocol errors or specific parts of a frame straightforward with a protocol aware trigger. The oscilloscope offers hardware-based triggering on specific protocol content, such as addresses

AVQA loopback monitor provides a non-intrusive end to end test of the entire ATC voice communications system. Using the patented technology of correlating the ground-based receptions with the ground-based transmissions, the system provides non-intrusive analyses of the entire communication chain. AVQA loopback monitor provides a non-intrusive end to end test of the entire ATC voice communications system

Ajith is one of our software developers and explains his understanding of important traits to work in Software Development at Rohde & Schwarz. Ajith is one of our software developers and explains his understanding of important traits to work in Software Development at Rohde & Schwarz. software development, challenges, employee interview, expierence, teamwork Ajith is one of our software developers

Rohde & Schwarz webinar from July 07, 2014 Increase your understanding of radar signal processing and waveforms. The all-weather capability of radar sensors is an important argument for many driver assistant systems. Measurement accuracy and resolution depend on the radar sensor and the used waveform. Automotive radars often apply continuous wave signals of high bandwidth in combination with digital

In this example the 5G waveform uses one of the physical layer parameterization currently discussed in 3GPP RAN1. How to generate a 5G New Radio (NR) waveform? This video demonstrates the generation of a 5G NR waveform using the R&S®SMW200A vector signal generator and the R&S®SMW-K114 5G air interface candidates option from Rohde & Schwarz. In this example the 5G waveform uses one of the physical layer

Learn how to do low-speed serial bus decoding with the digital channels of the RTP The 16 digital channels of the MSO option extend the measurement resources of the RTP. Use them for protocol-based triggering and decoding of low-speed interfaces such as I2C, SPI, MIL1553 or MIPI RFFE. The 16 digital channels of the MSO option extend the measurement resources of the RTP. Use them for protocol-based

The low-noise frontend and 10 GHz single-core A/D converter are the foundation for the extraordinarily high measurement accuracy and dynamic range of the R&S®RTO oscilloscopes. The low-noise frontend and 10 GHz single-core A/D converter are the foundation for the extraordinarily high measurement accuracy and dynamic range of the R&S®RTO oscilloscopes. The high definition mode (HD mode) activates configurable

R&S®MXO 3 - Fast. Precise. Compact Save time with the highly intuitive user interface and customizable Smart Grid with the R&S®MXO 3 compared to the Tektronix MDO3 Save time with the highly intuitive user interface and customizable Smart Grid with the R&S®MXO 3 compared to the Tektronix MDO3 R&S®MXO 3 SERIES OSCILLOSCOPE R&S®MXO 3 SERIES OSCILLOSCOPE Next generation oscilloscope: Fast. Precise. Compact

Analysis of DOCSIS 3.0 downstream signals and digital TV signals. Analysis of DOCSIS 3.0 downstream signals and digital TV signals. R&S®DSA | SC-QAM downstream signal analysis | Rohde & Schwarz Optimize your DOCSIS HFC network with the R&S®DSA. SC-QAM downstream signal analysis. Findout more.

Demonstration of generating interferer signals, generating AWGN signals, applying realtime fading - all within a single instrument. Demonstration of generating interferer signals generating AWGN signals applying realtime fading ...all within a single instrument. Video, SMW200A, R&S®SMW200A - Interferer, AWGN Generation and Realtime Fading Simulation

R&S®RTO oscilloscopes help you document measurements, including printing and saving screenshots of the screen content. R&S®RTO oscilloscopes help you document measurements, including printing and saving screenshots of the screen content, easy to read signal characteristics thanks to clear grid annotations and color-coded labels to highlight anomalies in the diagram. R&S RTO2000: Documentation at the

R&S®RTO6 uses HD Mode and digital trigger to isolate small signals R&S®RTO6 oscilloscopes can trigger on even the smallest signal amplitudes and isolate relevant signal events R&S®RTO6 oscilloscopes can trigger on even the smallest signal amplitudes and isolate relevant signal events. This capability is possible even when combining the digital trigger and the HD mode, which increases the oscilloscope

Overview of how to create and configure a test template. Overview of how to create and configure a test template. R&S®ELEKTRA, creating a test template Overview of how to create and configure a test template.

This session provides an insight into system-level issues and effective measurement and analysis techniques for achieving optimum system performance with rival requirements. This session provides an insight into system-level issues and effective measurement and analysis techniques for achieving optimum system performance with rival requirements. Power integrity for distributed systems This session

The R&S®CMW100 communications manufacturing test set with a supported bandwidth of 160 MHz is ready for testing initial 5G NR sub-6 GHz wireless devices in production. 3GPP's 5G NR will support frequency ranges up to 52.6 GHz, but initial 5G designs will use frequencies below 6 GHz with focus on 3.5 GHz. For sub-6 GHz carrier frequencies, 3GPP currently discusses a maximum bandwidth per component carrier

Learn in this short video about R&S®ELEKTRA EMC test automation software how to create the reference calibration and the test report. The R&S®ELEKTRA test software controls complete EMC systems and automates measurements of equipment under test (EUT) being certified for emissions (EMI) and immunity (EMS). R&S®ELEKTRA simplifies configuration of test systems and test descriptions in accordance with

In this video we explore the test setup required to test 5G NR devices in non-standalone (NSA) mode using the R&S®CMX500 mobile radio tester from Rohde & Schwarz. 5G network deployments are underway worldwide and mobile devices supporting 5G are already commercially available. Those devices have to be tested from an R&D perspective, for protocol conformance, RF conformance, for mobility. In addition

How to extend the frequency range of your spectrum analyzer? You can either use external harmonic mixers or invest in a new spectrum analyzer that covers the required frequency range. This video explains the differences between both methods and why a spectrum analyzer has a clear advantage compared to an external harmonic mixer. How to extend the frequency range of your spectrum analyzer? You can either

Learn more about the PR200 portable monitoring receiver and in particular synchronizing with 5G frame timing to effectively monitor and measure specific beams, on the spectrum display. Learn more about the PR200 portable monitoring receiver and in particular synchronizing with 5G frame timing to effectively monitor and measure specific beams, on the spectrum display. All key tasks in spectrum monitoring

Discover the insights of Rohde & Schwarz experts and other industry leaders as they discuss the pivotal research areas driving the evolution of wireless technology. As we venture beyond the boundaries of 5G, 6G is charting new horizons in wireless communication research. This new territory underscores the crucial role of collaboration within the 6G community, as we unite to address the challenges and

In this webinar you will demistify the topic of full vehicle OTA antenna testing and learn about why this technique is essential to ensure reliable automotive connectivity. In this webinar, Dr Benoit Derat, Senior Director of Engineering at R&S, demystifies the topic of Full Vehicle Antenna Testing and explains why this technique is essential to ensure reliable automotive connectivity. Also discover

The ESMW ultra wideband monitoring receiver is the core component of our future-proof spectrum monitoring systems for fixed, mobile and transportable stations. Here, at MWC2025, we are launching the much expected time domain analysis functionality for the ESMW with gated measurements, which is crucial for license compliance and interference hunting in 5G networks. The ESMW ultra wideband monitoring

Understanding the USB tree structure of a PC: practical demo Understanding the USB tree structure, vendor ID (VID) and product ID (PID) of a PC using tools like the USB Device Tree Viewer or Windows Device Manager. Understanding the USB tree structure, vendor ID (VID) and product ID (PID) of a PC using tools like the USB Device Tree Viewer or Windows Device Manager. USB, Compliance testing, compliance

Testing IoT devices with oscilloscopes. Internet of Things (IoT) devices combine multiple functional cores in highly integrated wireless embedded designs and face often challenging long-term battery live time requirement. This video demonstrates on an example M2M IoT device the Multi-domain test capabilities of the R&S®RTO oscilloscope. Multi-domain debugging of embedded IoT devices This video demonstrates

Solid-state 18GHz, 300W amplifier - Phil Parente Solid-state 18GHz, 300W amplifier - Phil Parente

Tech Talks with Robert Träger Dive deeper into the technical details of our new HF high power transmitter with the HF communications expert Robert Träger. Dive deeper into the technical details of our new HF high power transmitter with the HF communications expert Robert Träger. In each Tech Talk a specific topic will be covered and discussed. The first Tech Talk covers the topic “Efficency class of

For easy test signal generation the R&S®SMW200A vector signal generator features an LTE test case wizard, which is demonstrated in this video. LTE base stations need to be tested in line with the base station conformance test specification 3GPP TS 36.141. For easy test signal generation the R&S®SMW200A vector signal generator features an LTE test case wizard, which is demonstrated in this video. The

Discover how to debug a power supply using a near field probe and a gated FFT, as shown on an R&S®RTO. Discover how to debug a power supply using a near field probe and a gated FFT, as shown on an R&S®RTO. RTO2000, EMI debugging, automotive Discover how to debug a power supply using a near field probe and a gated FFT, as shown on an R&S®RTO.

Multiple signals Perform phase-coherent measurements on multiple antenna signals. Perform phase-coherent measurements on multiple antenna signals. Oscilloscope, RTP High-performance oscilloscope, Automotive Radar, Pulse Analysis, MIMO, phase-coherant, Mixer, Downconversion Perform phase-coherent measurements on multiple antenna signals.