Network Analyzer Accessories

Rohde & Schwarz provides a wide range of accessories for vector network analyzers.

Accessories

    • R&S®ZV-Z1xx: 50 Ohm O/S/M/T “4-in-1” design, male or female, up to 40 GHz
    • R&S®ZCAN: 50 Ohm or 75 Ohm, O/S/M/T as single components male and female, 3 GHz
    • R&S®ZN-Z2xx: 50 Ohm new high end manual calibration kit series. Up to 26.5 GHz and 43.5 GHz
  • Accessories - R&S®ZV-Z2xx - Calibration Kits - Coaxial - High End
    R&S®ZV-Z2xx - Calibration Kits - Coaxial - High End
    • R&S®ZV-Z2xx: 50 Ohm high end manual calibration kit series. Up to 110 GHz
  • Accessories - R&S®ZV-WRxx - Calibration Kits - Wave Guide
    R&S®ZV-WRxx - Calibration Kits - Wave Guide
    • R&S®ZV-WRxx: wave guide calibration kits, up to 500 GHz
  • Accessories - R&S®ZV-Z4xx/-Z3xx - Verification Kits
    R&S®ZV-Z4xx/-Z3xx - Verification Kits
    • R&S®ZV-Z4xx: High-end verification kits, full VNA measurement uncertainty verification, 50 Ohm, up to 50 GHz
    • R&S®ZV-Z3xx: The R&S T-Check, the fast and economic solution to check VNA measurement uncertainty with a single measurement.
  • Accessories - R&S®ZN-Z15x - Calibration Units – economy - 2 to 24 ports
    R&S®ZN-Z15x - Calibration Units – economy - 2 to 24 ports
    • R&S®ZN-Z151: 2 ports, 8.5 GHz, SMA(f), N(f), 3.5mm(f)
    • R&S®ZN-Z152: 6 ports (front), 8.5 GHz, SMA(f)
    • R&S®ZN-Z153: 4 ports (front), 8.5 GHz, SMA(f)
    • R&S®ZN-Z154: 6 to 24 ports (front), 8.5 GHz, SMA(f)
    • R&S®ZN-Z156: 2 ports, 5 GHz to 67 GHz
    • R&S®ZN-Z5x: Models from 9 kHz to 50 GHz, 2 or 4 test ports
    • R&S®ZN-Z51: Mixed connector types as options available
  • Accessories - R&S®ZV-Z5x - Calibration Units – High End – 2 to 8 ports
    R&S®ZV-Z5x - Calibration Units – High End – 2 to 8 ports
    • R&S®ZV-Z53 *. 75: 2 ports, 3 GHz, 75 Ohm
    • R&S®ZV-Z58: 8 GHz, 8 ports, 3.5mm(f) or N(f)
    • R&S®ZV-Z59 20 GHz, 6 ports, 3.5mm(f)
    • R&S®ZN-Z30: Controller Unit for R&S®ZN-Z32, R&S®ZN-Z33
    • R&S®ZN-Z32: Inline Calibration Unit 8.5GHz
    • R&S®ZN-Z33: Inline Calibration Unit 40GHz (standard and TVAC model)
  • Accessories - R&S®ZV-Z9x - Test Cables - ruggedized
    R&S®ZV-Z9x - Test Cables - ruggedized
    • R&S®ZV-Z9x: High-end test cables, ruggedized connectors, armored construction for exceptional breakdown withstand to crush forces
  • Accessories - R&S®ZV-Z19x - Test Cables - High End
    R&S®ZV-Z19x - Test Cables - High End
    • R&S®ZV-Z19x: High-end test cables, lightweight, bending resistance combined with virtually no springback
    • R&S®ZN-ZTW Torque Wrenches, from 0,34 Nm to 1,5 Nm

Small Components Accessories

Overview of Small Components Accessories for Network Analyzer from Rohde & Schwarz

Attenuators
  • R&S®DNF Attenuator

    0 Hz to 12.4 GHz, m/f

    x = 0: 3 dB, 2 W
    x = 1: 6 dB, 2 W
    x = 2: 10 dB, 1 W
    x = 3: 20 dB, 1 W
    x = 4: 30 dB, 1 W

  • R&S®RBU50 High-Power Attenuator, 50 W

    0 Hz to 2 GHz

  • R&S®RBU100 High-Power Attenuator, 100 W

    0 Hz to 2 GHz

  • Attenuators - R&S®RDL50 High-Power Attenuator, 50 W
    R&S®RDL50 High-Power Attenuator, 50 W

    0 Hz to 6 GHz, 20 dB

Terminations and Matching Pads
  • Terminations and Matching Pads - R&S®RNA Precision Termination, 75 Ω
    R&S®RNA Precision Termination, 75 Ω

    1 W, DC to 3 GHz, N (m)

  • Terminations and Matching Pads - R&S®RNB Termination, 50 Ω
    R&S®RNB Termination, 50 Ω

    1 W, DC to 4 GHz, N (m)

  • R&S®RAU UHF Termination , 50 Ω

    0 Hz to 2 GHz, 100 W, N (f)

  • Terminations and Matching Pads - R&S®RAD Feedthrough Termination, 50 Ω
    R&S®RAD Feedthrough Termination, 50 Ω

    0.5 W, DC to 1 GHz, BNC (m/f)

  • Terminations and Matching Pads - R&S®RAD50 Feedthrough Termination, 50 Ω
    R&S®RAD50 Feedthrough Termination, 50 Ω

    2 W, DC to 500 MHz, BNC (m/f)

  • Terminations and Matching Pads - R&S®RAM Matching pad, 75 Ω, L section
    R&S®RAM Matching pad, 75 Ω, L section

    bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section

  • Terminations and Matching Pads - R&S®RAZ Matching pad, 75 Ω, series resistor 25 Ω
    R&S®RAZ Matching pad, 75 Ω, series resistor 25 Ω

    0 Hz to 2.7 GHz

  • Terminations and Matching Pads - R&S®RAZ Matching Pad 50/75 Ω, series resistor 25 Ω
    R&S®RAZ Matching Pad 50/75 Ω, series resistor 25 Ω

    0 Hz to 3.3 GHz

Bridges, Power Splitter and Junction Box
  • Reflection coefficient measurements

  • Broadband impedance and reflection coefficient measurements

  • Measurement of reflection coefficient from 40 kHz to 4 GHz

  • Bridges, Power Splitter and Junction Box - R&S®DVS Power Splitter/Combiner
    R&S®DVS Power Splitter/Combiner

    0.1 MHz to 400 MHz, 1 W, 50 Ω , BNC (f)

  • Bridges, Power Splitter and Junction Box - R&S®RVZ Power Splitter, 2 x 50 Ω
    R&S®RVZ Power Splitter, 2 x 50 Ω

    0 Hz to 2.7 GHz

  • Bridges, Power Splitter and Junction Box - R&S®DVU4 Four-Port Junction Box
    R&S®DVU4 Four-Port Junction Box

    0 Hz to 1 GHz, 0.25 W into 50 Ω per input,

    4 x Dezifix B or 4 x N (f)

  • R&S®ZV-Z1227 2-way Wilkinson power divider

    4 Ghz to 27 Ghz

Adapter – Miscellaneous
  • R&S®ZV-Z1118 Adapter SMA m/m angle

    0Hz to 18GHz

  • R&S®ZV-Z1218 Adapter SMA m/f angle

    0Hz to 18GHz

  • R&S®ZV-Z61 Bias Network

    2 MHz to 4 Ghz

  • R&S®WCA70 Waveguide Coax Adapter, WR15 to 1.85 mm (male)

    50 Ghz to 75 GHz

Literature – Software/Instrument Control
  • NWA_Handbook-en Network Analysis Handbook (English)

    "Fundamentals of Vector Network Analysis"

  • NWA_Handbook-de Network Analysis Handbook (German)

    "Grundlagen der Vektoriellen Netzwerkanalyse"

  • (for control of external devices via IEC/GPIB or LAN)

  • (for control of external devices via IEC/IEEE bus)

Power Sensors
International Website